Find a Conservatory Installer you can trust near you.

Building a conservatory can be a challenging task. But whether you plan to hire a professional to build your aluminium conservatory or are considering DIY, it’s good to start with a rough idea of how the process works.

It’s essential to begin with a strong conservatory base. The area needs to be measured out carefully and then dug out. You then need to level the earth and pour in concrete. Your damp proof course goes on top of this, preventing rising damp from entering your structure and creating the floor level.

Then, you need to build your conservatory walls. Start by building your dwarf wall, positioning the external sills on top. Next, fix in the frames and hang your doors. Sit your roof ridge on top of the frames, and add the roof rafters.

Finally, you need to fit the glazing sheets and guttering. Once this is all done, your new aluminium conservatory is ready to go!

Generally, if you want to do a job, you can as well ensure that’s done properly. You may be considering building a small base for an orangery, but no matter how small it is, it just shouldn’t be done to any other than a compliant standard, and that’s whether or not an approval is needed. When it comes to building work which is covered by Building Regulations, you are required to comply (by the law) with the regulations and to make use of one of the two types of Building Control Service available. These includes the Building Control Service given by your local authority or the Building Control Service given by approved inspectors.

Regardless of the service you opt for, you’re going to pay but the preferred service may offer an advice before commencement of the project. The individual carrying out the building work is charged with the responsibility of ensuring total compliance with the regulations. Therefore, if you select to undertake the project by yourself, the responsibility is primarily on you. In the same vein, if you opt for a building company the responsibility would be the company’s, but you should always ensure to confirm this position before commencement of the project. You must also take note that you may be served with an enforcement notice if you fail to comply with the regulations as the owner of the building. So it’s advisable that you choose your builder very carefully.

There are a bunch of elements you may require approval for like the structural integrity, appropriate insulation levels, or the construction of a building over drainage or sewage. In cases where it’s obvious that you’d need building regulations, you can simply submit the building and planning application together at once.

Due to temperature changes, conservatory window seal expand and contract over time which may lead to them wearing out eventually. If you’re facing a similar issue with your conservatory window seal, then you’d probably want to know how you can go about the repair. If yes, then you’ve come to the right place! In this post we’re going to take you through the conservatory window seal repair process. Let’s take a look!

First and foremost, let consider how to determine if your windows needs to be resealed. This is a very simple procedure as a visual check can help identify whether or not the window needs to be resealed. Simply watch out for the area where the windows meets with the frame as well as the point where various sections of windows meet with one another. You should observe whether there’s an obvious sign of wear and tear, gaps and cracks in the seal. If any is found, then your conservatory window seal will have to be repaired as soon as possible. Another important indicator is a draught coming from the window area or visible condensation signs on internal panels of the glass panes.

When it comes to the resealing of windows, it’s highly recommended that you call in a professional. However, if you wish to carry out the task by yourself as an experienced DIYer, then it would be wise to take extra caution. If done the wrong way, this is likely to generate further issues along the road while also allowing more heat to escape your conservation

How Long Do UPVC Conservation Last?

UPVC conservatories are common features on residences across the UK for a good reason. Not only do they give you the extra living space you so much desire within your home or property, but they also go a long way to add value to your property. So if you’re also thinking about constructing a UPVC conservation within your home, you’re probably not alone! One of the several benefits of the structure is also its longevity, however this is dependent on a number of factors. Let’s take a closer look!

Modern UPVC windows will normally last between 20 to 25 years, however some are able to last much longer provided they’re properly maintained and top quality materials are used. And thanks to improvements in colour technology, the finish on UPVC tends to last much longer too.

Some of the factors that can go a long way to determine the longevity of your UPVC conservation includes the type of roofing materials used, how well it’s being maintained, the location or placement of the structure, replacement of individual conservatory parts, as well as insulation.

The type of roofing material for a UPVC conservation can either be glass, polycarbonate or tiles. The glass and polycarbonate roofs usually lasts for a minimum of 20 years when it’s properly installed and provided with the necessary upkeep. Meanwhile, tiled UPVC conservation roof are generally expected to last up to 50 years which is significantly longer than the counterparts - glass and polycarbonate. Interestingly, they require little to no maintenance and are also very unlikely to get damaged during the upkeep.

It’s also very important to make use of a reliable and reputable company to have your UPVC conservatory installed. This is because your structure can only be as good as the company responsible for its installation. So if you require a structures that will last for decades, you should pay great attention to the company you’ll hire.

When it comes to extending your home or creating more living space, you can either construct an extension, transform a current space or add a conservatory. While all the three available options to create more living space in your home are worth giving a shot, the wooden conservatory happens to be the easiest and cheapest of them all. If you are thinking about building wooden conservatory of your own, then you’d probably want to know exactly how much its going to cost. The simple answer is that it depends on multiple factors such as the type of wood required, the size, style as well as the quality of materials to be incorporated in your final conservatory design.

The most significant determinant, however, is the type of wood required. Below is a breakdown of the prices based on this factor:

• Hardwood Conservatory

Hardwood such as elm and beech are one of best options for building conservatories due to their complex structure which helps increase the durability and stability of conservatories. The price of an average hardwood conservatory without fitting usually ranges £10,000 to £15,000.

• Oak Conservatory

Due to its popularity and high availability, oak is a very common wood type used in the construction of conservatories. And as a result, it can be gotten within a range of £9,000 to £10,000 for just the wood. Oak can also be made to be resistant to bugs and pests. The price of this type of oak wooden conservatory jumps to around £15,000 to £20,000.

• Timber Conservatory

This refers to various types of wood that’s readily available before being subjected to treatment in different plants or factories. Due to its rather rough exterior and lack of a clean finish, this type of wood is usually gotten at a giveaway price. Depending on the type of wood, the price to buy just a timber conservatory kit can vary between £10,000 to £20,000.

Click here to learn more about wooden conservatories

After being in the shadows of conservatories for so long, Orangeries are now pulling a great comeback into the scenes. They were quite popular back in the 17th and 18th century, but went into the drawers with the advent of conservatories. In recent times, Orangeries are now becoming more and more popular with several homeowners now looking to have one constructed in their homes.

Like many other home improvements or extensions, orangery prices can vary based on a number of factors. However, you can expect to incur within the range of £15,000 to £20,000 for a basic orangery design and build. If you wish to build orangeries with more distinctive features, this price can jump up to £50,000 or more depending on your preferences. Generally, orangeries are more likely to be a bit cheaper when compared to their conventional extension counterparts and add more value to your home than a conservatory in terms of a resale.

For the best results, it’s advisable to investing good money to ensure a solid build and save money in the fittings. Do not look to cut costs by going for cheaper building materials like poor quality vines. Generally, interior design will always depreciate in value, but its the solid structure that command great value for resale purposes. Also, when the structure is solid and of a great quality, you’ll get to save a lot of repair money down the line as the cheaper frames will always give way with time. However, if you have the money, you can also consider spending huge bucks on both the structure as well as the fittings because its only through this you truly maximize the benefits from your orangery. When the fittings are of great quality, repairs won’t come often which ultimately saves you some money as well.