Find a Security Specialist you can trust near you.

One of the major challenges faced by double gates is wind as this is always blowing over the gates and slamming them together anytime it passes by. So how do you tackle this? Since you can do only so little about the wind, the only option you have is to enforce or secure your double gates. This is quite simple if you have the adequate knowledge and skills, if not, we’d strongly recommend calling in a professional who can guarantee the best results the first time. In this post, we’re going to take your through the processes involved in securing a double gate to ensure your project turns out a success. Let’s take a look!

1. Hammer a pipe into the ground. Since this isn’t a heavy construction work, you need not worry about water finding its way into your basement. To do this, simply open the gate and stretch it to determine how far it can go. Once done, proceed to mark the place right below the gate’s edge. This is the spot where you will hammer in the metal pipe.
2. Install the lower bracket. With the pipe in place, the next thing is to have the lower bracket installed. Start by drilling some pilot holes if necessary, then screw the nails right into the wooden gate via the bracket’s holes.
3. Take measurements for the top bracket using the cane bolt. Once done with the lower bracket installation, you’ll have to bring out the cane bolt and attach it to the gate to give you an idea of where to place the top bracket - mark the spot using a pencil.
4. Install the top bracket. Start by removing the cane bolt and install the top bracket just as you’ve done with the lower bracket.
5. Install the cane bolt through both brackets.

The number of sensors you need will depend on the size of your home. Most alarm systems feature 2-4 passive infrared sensors (PIRs) for motion detection, and 2-4 magnetic contact sensors on doors and windows. An alarm company will advise you of how many your property will need upon an inspecton.

According to several studies and survey of ex-burglars, a home or building is less likely to be burgled with the availability of properly functioning and well fitted burglar alarm system. So if you’re thinking about installing one in your house, you can as well make sure you get the best possible burglar alarm that’s just right for your home. Several people asks the question of the best burglar alarm, but the fact is, it all depends on a number of factors such as your budget, personal preferences, your location, home features as well as the protection and response level you require. To put you in the right direction to make the best choice, here’s a breakdown of the types of burglar alarm systems to help you determine the one that will best suit your home.

lBells-Only Alarms

This makes a loud sound but that’s as far as it goes. It will not contact anyone.

Pros

• No monitoring contract and payment

• Easy to install

Cons

• It does not contact anyone.

• It may not deter the burglars if there’s no one around to stop the intrusion.

lDialler Burglar Alarms

This contacts your phone or any other numbers nominated once the alarm is triggered.

Pros

• No monitoring contract and payment.

• Nominated numbers would be dialled

• It can also notify you of other dangers such as fire if extra sensors are acquired.

Cons

• If you opt for a GSM dialler, a weak mobile network can affect its effectiveness

• Nominated numbers may be unavailable when dialled.

lSmart home security system

This contacts your or your loved ones whenever the alarm is triggered via a Smartphone or tablet application.

Pros

• Notifies you when away from home

• Can be monitored and controlled from a Smartphone

Cons

• If you opt for a GSM dialler, a weak mobile network can affect its effectiveness

• They can be expensive depending on your selected elements

lA monitoring contract

This implies paying a monthly or annual fee to a company to act or notify the police the your alarm is triggered

Pros

• The monitoring company is in hand to act in order to prevent the potential burglary and liable if it doesn’t.

• Some of the companies also offer maintenance services

Cons

• Expensive

• It cannot be installed by yourself

Click here to learn more about burglar alarms.

Visible alarm systems can deter burglars. There are a range of options for what happens when an alarm is triggered. For example, there are bells only, alarm receiving centre, and homeowner monitored alarms. These are all effective as deterrence methods, and which you choose will depend on your specific needs.

This is usually the question that comes first when thinking about installing a home security system and reasonably so. However, it can also be very tricky to provide an accurate answer as alarms now features varying shapes and sizes. However one thing to have in mind when it comes to getting a burglar alarm is that it’s definitely better to be safe than sorry. Here, we are going to provide a clear and succinct information to help you get a good idea of how much you’d have to spend to have your house secured.

Let’s Consider the Different Types of Burglar Alarms

• Bells-only alarms

This is the most popular type which features a loud siren that is positioned at the exterior of your building and linked with varying motion sensors in strategic locations. Whenever a motion is detected by the sensors, an ear-splitting sound would be triggered. To get the basic starter kit (2-3 sensors and 1 siren) for a DIY installation, the cost ranges between £130 - £160. However for a more advanced system, the price jumps to £400 - £500.

• Dialler alarm systems

This works with different motion sensors strategically placed across the home. When triggered, it sets off the siren and also rings your mobile device. A system with two sensors and one emergency number costs between £200 - £300.

• Monitored alarm systems

This system is linked to a central call centre who alarms the authorities or private security to a violation of the protected zone. The cost for a monitored alarm system starts within the range of £500 to £600, while the monitoring services can cost within the range of £300 to £400 annually.

Other Possible Costs

• Installation

After purchase, you’ll need to decide whether or not you want your system professionally installed. Generally, the cost of getting a professional installation service costs between £150 to £200.

• Maintenance

Do you think your burglar alarm requires yearly maintenance inspections? Depending on the make and model of the system, the maintenance cost may vary. However, the prices usually starts within a range of £100 to £150.

Various studies have suggested that CCTV is an effective deterrent against home burglaries. In the event that a crime is committed on your property, well placed CCTV means you’ll have the evidence to help the police. It has been recorded consistantly that since CCTV systems have been installed, localised crime has fallen and has lead to more arrests.

Properly installed and calibrated alarm systems will very rarely trigger a false alarm. If you have pets you will need to use pet-friendly alarm systems. External sensors should be properly calibrated to avoid triggering in the wind or rain. NSI is a recognised standard for all alarm installations, check the NSI flag is displayed on an installers credentials.

Having a security gate installed on your property brings about a lot of benefits. However, to ensure these benefits are maximized, it’s important to make sure the gates are properly installed. The installation can be made a DIY task or professionally installed. If you wish to install your security gates by yourself, then you’ve come to the right place! In this post, we’re going to take you through the processes involved in the installation of a security gate. Let’s take a look!

1. Go through the instructions carefully to get the best out of your installation and also a good understanding.
2. Dig holes for the posts. Don’t make holes round to make sure the posts do not turn or twist.
3. Get rid of any obstructions like uneven ground, rocks or any other obstacles that may impact the free opening of the gate.
4. Re-confirm the distance between the two poles to make sure that the gate can hang perfectly between them.
5. Get an adjustable hinge. Adjustable hinge will allow for extra customization while also enabling improved correction of errors.
6. Make sure that the measurement taken leaves sufficient space for vehicles such as emergency vehicles and package delivery trucks when opened.
7. If you have a fence that’ll be connected to the gate, you should install the gate at the back of the fencing pillars. If you later decide to automate the security gate, this will prove to be a smart move as it enables a free and unhindered function.
8. Make sure you go through the local laws before installation.