Commercial Air Conditioning in Latheron

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

If used and maintained properly, air conditioning can actually be a great way to create a healthier environment. As well as controlling the temperature, it also filters your air, removing pollutants like dust, pollen and mould particles.

However, to maximise these benefits, it’s important to keep your system clean. Dirty units and systems can become a health hazard, so always make sure you service your air conditioning at least once or twice a year.

Most air conditioning units will need yearly maintenance. This will involve a full service and cleaning of filters. In very dusty areas units may need more frequent maintenance. Regular servicing will extend the life of an air conditioning unit. Keep a record of when this is done so you know when to contact someone!

With summer fast approaching, most business owners are getting ready to battle the great heat that often comes with it. One of the most important tasks would be to make sure that the commercial HVAC system is in top condition to run efficiently and smoothly through to help lessen or cancel out the effect of the summer’s heat in the work environment. Air conditioning systems when not properly maintained can take up to 30 percent energy which is capable of sending your utility bills through the roof during the season that calls for a heavy usage. In this post, we’re going to consider some top tips you can implement to prepare your commercial unit for summer air conditioning. Let’s take a look!

• Filter cleaning and maintenance. When the filter is clogged the cooling is decrease and more energy is consumed (implying higher electricity bills) as the unit works harder to have your work environment cooled. The filter accumulate dust, dirt and other particles pretty easily which also affects the indoor air quality since they’ll get pushed out with the cool air distributed. Therefore, there’s a need to ensure that the filters are washed regularly and also changed (at least once a month during summer).
• Air flow leaks and obstructions. If the blower components aren’t properly adjusted, this can lead to a 15 percent drop in the system’s efficiency. Also, gaps and obstructions in duct work can lower air flow in the HVAC unit. Therefore, you’ll need to check the ducts and connectors for loose spots or damages, also check walls, doors and windows for cracks and leaks which can allow the outside warmth to draft in and the cool air to flow out.