Damp Proofing in Clwyd
Extensions such as garage conversions will typically require supplementary damp proofing to be installed during the conversion, as the existing garage will often have a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Furthermore, the roofing of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will most likely be performed by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might need to be improved as part of the conversion in order to comply with current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This can be carried out by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, and so is it necessary to make sure that your garage conversion employs appropriate damp proofing methods.
