Damp Proofing in Cromer
Extensions including garage conversions will often require extra damp proofing to be installed during the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Furthermore, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may need to be improved as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is accomplished by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to adhere to, and so is it important to make sure that your garage conversion makes use of appropriate damp proofing methods.