Damp Proofing in East Midlands
Extensions including garage conversions will often require supplementary damp proofing to be installed through the conversion, as the pre-existing garage will often have a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Additionally, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will most likely be achieved by utilising a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may need to be updated as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting gradually as moisture sets in. This can be performed by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion should comply with, therefore is it vital to make sure that your garage conversion makes use of appropriate damp proofing methods.
