Damp Proofing in Lancashire
Extensions such as garage conversions will typically require extra damp proofing to be added as part of conversion, as the pre-existing garage normally has a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. In addition, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this may need to be updated as part of the conversion to be able to comply with current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting gradually as moisture sets in. This is performed by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion should comply with, and so is it important to make sure that your garage conversion incorporates suitable damp proofing methods.
