Damp Proofing in Littlehampton
Extensions including garage conversions will often require extra damp proofing to be installed during the conversion, as the existing garage normally has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Moreover, the roof of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will usually be achieved by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may need to be updated as part of the conversion to be able to adhere to current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This is performed by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion should comply with, therefore is it important to make sure that your garage conversion employs appropriate damp proofing methods.
