Damp Proofing in Stansted
Extensions including garage conversions will typically require extra damp proofing to be added during the conversion, as the existing garage normally has a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing should be added to walls and floors. In addition, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will most likely be performed by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this may have to be improved as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This can be performed by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to adhere to, and so is it necessary to make sure that your garage conversion makes use of appropriate damp proofing methods.