Damp Proofing in West Midlands
Extensions such as garage conversions will usually require extra damp proofing to be installed through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Furthermore, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will most likely be achieved by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this may have to be updated as part of the conversion in order to comply with current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting gradually as moisture sets in. This can be performed by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, and so is it vital to make sure that your garage conversion makes use of suitable damp proofing methods.
