- Prepare the sub-base The driveway company will excavate, or dig, the existing surface down to a depth of around 200mm. They will remove any debris from the area may place it in a skip or arrange for it to be removed in another way. When they dig down to the sub-base of your previous driveway, they will assess how much hardcore they need and arrange for that to be delivered to the site. They will then spread the hardcore across the sub-base to create a level surface to pour the concrete on. Most good contractors will apply a gel to any walls and doors to protect them from concrete splashes. They will also add any gulley tops, manhole covers or shuttering that’s required.
- Installation and imprinting Next, the tradespeople will have the concrete either poured from a large mixer vehicle or barrow it in from a mixer and pour onto the surface. They level it with rakes, then add a colour surface hardener in a colour of your choice. This will give the driveway its permanent colour. They will then wait until the concrete has hardened to the correct consistency for imprinting the pattern, then will use special tools and stencils to make the pattern that you asked for. They will then spread a colour powder called a release agent over the surface, and leave to dry for 1 to 2 days depending on the weather conditions.
- Cleaning When the contractors return, they will add crack control cuts into the concrete. This is important because concrete expands and contracts in the heat, so there needs to be some give to stop any larger cracks from forming. Then everything is power washed clean, and a chemical wash is also used on the concrete to ensure it’s completely dust-free. The installers will ensure all your walls and doors are clean, which will hopefully be an easy job if they used wall gel.
- Sealing The final step is to seal the driveway. There needs to have been at least two dry days before the tradespeople can do it, so you might find it’s best to have your pattern imprinted driveway installed in the summer. The contractors will blow any debris away from the surface and dry any damp areas where necessary. They will then add an anti-slip agent to the sealant and brush it on. It’s best to not walk or drive onto your new concrete driveway for about 4 days after sealing to allow everything to set. But after that, you’re ready to use your new driveway!
Invergordon
Invergordon is a town as well as port in Easter Ross, in Ross and Cromarty, Highland, Scotland. It hinges on the parish of Rosskeen. The town is well known for the Invergordon Mutiny of 1931. Much more lately it has likewise come to be recognized for the repair service of oil rigs which line up in the Cromarty Firth on which the town is situated. In the 1970s and also 1980s nearby Nigg was known for the building of these rigs. The lawn used for this is currently trying to re-establish itself as a fabricator of big overseas wind generators and also oil rig repair since being acquired by Global Energy Group. For a number of years Invergordon was the website of an aluminium smelter till 1981 when British Aluminium shut it down. The pipeline that covered the conveyor belt from the smelter to the Bachelor's Degree pier was not taken down till the early 2000s and the two large containers still stand today as well as a water tower. It still has a grain whisky distillery, operated by Philippines-owned whisky giant Whyte and also Mackay, the outcome of which adds to numerous mixed whiskies. Connected to the distillery was the Invergordon Distillery Pipe Band. Currently the port is seen by numerous large cruise liners each year, as the deep water port permits disembarkation for instructor trips in the north Highlands. Considering that the 1970s some would certainly regard the town as a 'Glasgow nest', because many employees were recruited from southerly Scotland to work in the oil well manufacture and aluminium smelting markets. Therefore, the residents' accents typically show a lot more influence from Glasgow, than the surrounding Easter Ross language of Highland English although this has actually changed recently. In recent times Global Energy Group have been broadening, with the acquisition of the Nigg manufacture yard it has actually also brought much valued job to Invergordon's Docks with the community again packed with oil business workers with the day.
