External Painting & Decorating in Rushden

How To Paint Exterior Walls

Painting of exterior walls is a value adding task which can be done by any competent DIYer. So if you’re confident enough to pick up a brush and roller, then all you need to do is to follow the instruction in this step by step guide and you’d be glad you did. Painting your exterior walls yourself can save you lots of money that would rather have been spent on hiring the services of a professional painter and decorator. However, if you don’t feel confident enough to pull this off, then it’s advisable to call in a reliable painting specialist who can guarantee the best results for help. Here, we’ll take you through the needed steps to complete the painting of your exterior walls.

✓ Surface Preparation. This involves protecting all fencing and exterior wall component that’s not to be painted with a drop cloth or masking tape. You’ll also need to completely wipe out any dust before you start to paint a plaster surface. If it’s a previously painted wall, you’ll also need degrease it and remove or scrape off any loose areas of the plaster.

✓ Priming. This involves preparing the primer as instructed in the manufacturer’s guide. Then start to prime the surface by using a brush or a small paint roller to prime the corners, little items as well as all surfaces that are difficult to reach. Once done, then you can tackle the larger surfaces using a larger paint roller.

✓ Painting. To start painting your exterior walls, you’d have to prepare the product first by missing it thoroughly as instructed in the manual. Once done, you can repeat the same process as given in the priming stage above using your paint this time. Once done, you can decide to apply a second layer within a minimum of 4 hours after applying the first layer.

How To Remove Flaking Paint From Exterior Walls

For a successful exterior wall painting project, all that’s required is the right painting tools and equipments, the appropriate exterior paint as well as the necessary preparation of the surface. With the later being perhaps the most important part of the project which is likely to take your time and effort as there’s no short cut to it. But once you have a good idea on how to prepare the exterior wall’s surfaces, the painting of the exterior of your house becomes a lot easier. And a good example of this, is the process of removing the flaking paint on the surface. Fortunately, you do not require the skills of an expert to be able to remove the flaking paint from your exterior walls. So let’s take a look at how you can remove flaking paint from your exterior walls with relative ease.

✓ Clear all flaking or peeling paint. This involves scraping the entire painted surface with a scraper to remove all loose paints. For the paints that wouldn’t yield easily, you can apply extra pressure to wipe it out. However, it’s important to be careful while doing this to avoid gouging out or damaging the surface.

✓ Use coarse sandpaper. Make use of a sandpaper to sand all the exterior wall’s surfaces until they’re smooth. When you get to tight spaces and trim, you can incorporate a sanding block to make your job easier and more effective. Note that a smoother surface will make for a better adhesion.

✓ Use an orbital or power sander. If the paint is peeling, you can scrape it off perfectly with the help of a power sander. This will help you in achieving a smooth surface on inaccessible edges and more.

In most areas, you will not need planning permission. However, if the property is listed or in a conservation area, you will need listed building consent or planning permission to paint the exterior. A surveyor or architect's advice will be invaluable as they can help with this process.

Exterior painters and decorators will prepare the areas to be painted for you. This will involve washing and cleaning the area and making sure that it’s a good quality surface. Cracks or holes should be filled in. In some cases, you may wish to have rendering redone before the painting is done.