Find an Air Conditioning Engineer you can trust in Newent.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

If you live in the UK, you’d know by now that no matter what’s happening in the world around us, nothing is going to stop the heat from getting in. And that’s exactly more reason why a well functioning cooling system is more of a necessity than a luxury. Hence, we’ve put together this list to help you avoid common air conditioning mistakes this summer. Let’s take a look!

• Not changing the filter. In the summer when the heat turns up there’s a huge need to change the air filters on a regular basis ( at least once a month). This is due to the fact that your air conditioning system works extra hard and runs all the time during the warmer months. What’s more? If you happen to have pets, a large family or live with an individual who suffers from asthma or allergies, it becomes a lot more important to change your air filters. Plus, a dirty filter is capable of increasing your energy cost within the range of 5 to 15 percent on a monthly basis.
• Not having the right size. When it comes to air conditioning, there’s no one-size-fits-all approach. You simply have to purchase and install the right size for your property which is chiefly determined by the type of the dwelling, the home’s size and other factors.
• Ignoring red flags. Calling in a technician isn’t always the most convenient thing to do especially when life gets a bit busier. However, when you choose to ignore warning signs that something is wrong with your HVAC system, you risk a total breakdown of the unit. What happens is the problem becomes an even more serious issue which will be very costly to repair or at times, replaced.

Nothing provides you with more relief during the hot summer months than having a fully functioning air conditioning system at home. If you seek to keep your surrounding cool, then your best bet would be to install an air conditioning system. The system functions mainly by transmitting air over a specific temperature to outside from the inside and then replaces it with the cooled air. The outcome of this is a comfortable, conducive and relaxing environment to live, play or even work. Asides the cooling advantages provided by air conditioning systems, they’re also able to deliver other great benefits like removing pollutants and improving the indoor air quality of your living space. What’s more? They also feature filters which works to keep out both insets and parasites. So when making a purchase decision, most homeowners are usually concerned about the cost of buying and installing these air conditioners. If you’re also interested in knowing the cost, here’s what you need to know.

There are different types of air conditioning units with each having it own unique prices. Let’s have a look.

✓ Portable air conditioning unit - £300 to £600

✓ Fixed air conditioning unit - £800 to £1000

✓ Installation Charges - £130 to £200 per day

The prices of these air conditioning units varies depending on a number of factors. Some examples of these price influencing factors include the height of the ceiling, the exact number of both the doors and windows, construction or design of the property and finally, the number of people it can cover at a go.

You need to determine the air conditioning unit’s size as well as the size of the area. Generally, a ton of AC unit is perfect for cooling an area of about 400 square feet.

It can be quite tricky knowing the right time to purchase and fit an air conditioning system, however if you get the timing right, this can go a long way to help you save both time and money. It’s important to note that different individuals usually have varying needs - like it it’s possible your existing unit just broke down during the summer months or you’re carrying out some renovations during spring.

In general, there’s the need to put a couple of factors into consideration in order to make sure you AC installation is a hassle free experience. The best time to install an air conditioner is actually before the construction of the house. Several high set homes do not possess the space to fit fully ducted air after building. And even if there’s space, accessing the ceiling and down into the floors can be pretty expensive and difficult.

Installing an air conditioning unit earlier would mean less plaster would be required later down the road. A good air conditioning installer or HVAC expert should also advice you on the best location for the unit in order to help you maximize cooling in the summer and heating in the winter. Most importantly, if your AC unit is built into your house’s design, you’ll be able to save more money in the long run. However, you may not be able to fit a unit when constructing or renovation, therefore choosing the right time would be a question of, when is the right time of the year.

Generally, choosing a month in the off-season is actually a much better time to fit an air conditioner, but ensure that it’s the right time. Overall, the best time for an air conditioning unit installation is autumn when the demand is at its lowest. Since retailers are usually overstocked with units after the summer months, you can get yourself some nice discounts

With heating and cooling bills making up more than 50 percent of one’s overall utility expenses as reported by the Department of Energy, you’d probably want to know some ways in which in you can improve the efficiency of your air conditioning system. With the warmer months just around the corner, now is the best time to get started. Not only will you be able to improve the air conditioning efficiency in your home, but you’d also be able to save some money on cooling and heating bills. In this article, we’re going to consider the top 5 tips you can implement to get your air conditioning system running efficiently and at its maximum. Let’s take a look!

• Ensure that around your outdoor condenser unit is clean. When clean and free of debris, your outdoor unit is able to function at its best. This can be done by yourself just by watching a couple of videos, however you’ll need a professional whenever a more thorough and in depth cleaning required.
• Vacuum indoor vents and keep vents unblocked. In order to ensure there’s an uninterrupted airflow from your system, there’s a need to vacuum dust as well as form of debris away from the indoor vents. You should also keep items such as furniture and blinds away from obstructing the vents.
• Increase your thermostat by a number of degrees. Generally, adjusting temperature 5 to 8 degrees can go a long way to help you save some money.
• Keep lamps and other heat producing appliances away from the thermostat. Having heat producing appliance will only inform the thermostat that the air in the room needs extra cooling. This will make the system run longer and use up more electricity.
• Keep the curtains and blinds closed. This is to prevent the heat of the outside coming in and vice versa.

With summer fast approaching, most business owners are getting ready to battle the great heat that often comes with it. One of the most important tasks would be to make sure that the commercial HVAC system is in top condition to run efficiently and smoothly through to help lessen or cancel out the effect of the summer’s heat in the work environment. Air conditioning systems when not properly maintained can take up to 30 percent energy which is capable of sending your utility bills through the roof during the season that calls for a heavy usage. In this post, we’re going to consider some top tips you can implement to prepare your commercial unit for summer air conditioning. Let’s take a look!

• Filter cleaning and maintenance. When the filter is clogged the cooling is decrease and more energy is consumed (implying higher electricity bills) as the unit works harder to have your work environment cooled. The filter accumulate dust, dirt and other particles pretty easily which also affects the indoor air quality since they’ll get pushed out with the cool air distributed. Therefore, there’s a need to ensure that the filters are washed regularly and also changed (at least once a month during summer).
• Air flow leaks and obstructions. If the blower components aren’t properly adjusted, this can lead to a 15 percent drop in the system’s efficiency. Also, gaps and obstructions in duct work can lower air flow in the HVAC unit. Therefore, you’ll need to check the ducts and connectors for loose spots or damages, also check walls, doors and windows for cracks and leaks which can allow the outside warmth to draft in and the cool air to flow out.

Central air conditioning system is a system which operates by cooling air at a central place and distributes the cooled air to and from rooms with the help of one or more fans and ductwork. What makes the whole idea of air conditioning feasible is the operations of the air conditioner compressor. When it cooling gas is compressed, it allows it to absorb heat from the house and blows it outside into the outside air and that’s exactly how the cool air is being generated.

Central air conditioning are of two main types which includes a split system as well as a packaged unit.

Generally, in the split system AC unit, both the condenser and compressor are included in the outdoor metal cabinet, whereas the indoor cabinet includes the evaporator. Typically, in several split system air conditioning units, the indoor cabinet will also include an air handler or a furnace. What’s more? The evaporator coil of the AC unit is fitted in the cabinet or the furnace or heat pump’s primary supply duct. This type of central air condition is usually the most economical AC unit to fit if you already have a furnace in your home.

However, in a packaged central air conditioning system, the components including condenser, compressor and evaporator are all included in one cabinet. Supply of air as well as the return ducts are connected through the home’s exterior wall or roof to the package central air conditioning system - mostly placed outdoors. This type of central air conditioners also features electric heating oil or a natural gas furnace. With this perfect blend of central heater with air conditioner, there’s simply no need to a separate furnace indoors.