Find an Air Conditioning Engineer you can trust in Beaumaris.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

As the summer months draw nearer, you get better accustomed to the ambient noise produced by your air conditioning system which is constantly in operation to keep your home cool and comfortable for both you and your loved ones. During this period, it’s absolutely normal to expect a spike in your energy bill and wish to know how you can limit the expenses without having to sacrifice your home’s temperature. In this guide, we’re going to consider some of the major ways you can save energy in your home without having to sacrifice your air conditioning system. Let’s take a look!

1. Reduce phantom loads. This is an electronic appliance that still makes use of energy even when turned off and not in operation. These phantom loads are actually everywhere in your home but you just don’t know that the television, toaster or even your phone’s charger continue to suck electricity when they’re not in use.
2. Incorporate more energy-efficient appliances. Before making a purchase, ensure that the appliance has the Environmental Protection Agency’s Energy Star Label as they use 10 to 15 percent less energy than their counterparts.
3. Change out your light bulbs. The older your incandescent light bulb gets, the more energy it consumes. You can cut cost by reglarly changing them out.
4. Install a programmable thermostat. With such a device, you can adjust your home’s temperature to your schedule and needs to cover for the time when you would not be home.
5. Use fan. A cooling fan can significantly lower the cost of running an AC system.
6. Seal all air leaks. Blocking all air leaks in your home is a great way to ensure energy is well maximized
7. Make your windows more efficient.
8. Enhance you insulation
9. Conduct a regular servicing of your AC unit
10. Setting the air conditioning temperature higher at night

When it comes to getting an air conditioning unit for your property, one of the greatest mistakes you can possibly make is purchasing and installing the wrong type as well as size in your personal space. In the event whereby you happen to go for an AC unit that’s too small, it won’t be powerful enough to cool your room as you would like. However, when you go ahead to select an oversized AC unit, your room would be cooled relatively quick but will leave the air in your room with excess humidity and consume more electricity as it’s going to cycle on and off which will ultimately cost you more money. As a result, it’s always a smart move to put some things into consideration before making any financial commitment. In this post, we’re going to consider how you can determine the perfect air conditioner for your building. Let’s take a look!

• Determine the appropriate size for your space. When buying a new air conditioner, one mistake you should never make is getting the wrong size. A unit that’s too small will have to work overtime to achieve the set temperature for the room and driving up your energy bills, while a unit that’s too large will cool the air pretty easily and quickly but leave it damp and clammy. To get the appropriate size, you’ll have to take the measurement of the room’s square footage using a tape measure, calculate the room’s square footage and determine the cooling capacity required for the room in question which is measured in British Terminal Units (BTUs)/hour.
• Look out for the ENERGY STAR® certification. It’s crucial to buy and install an air conditioning system with the blue ENERGY STAR® certification. This means that the unit has met or exceeded certain higher efficiency standards than other similar models.

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

Also referred to as Freon, the refrigerant “R22 is a commonly used chlordiflouromethane that’s usually incorporated in air conditioning systems as well as many other refrigeration applications. However, because of the evidence discovered which shows the gas can contribute to the damage of the ozone layer, the refrigerant has now been banned since Dec 31, 2009 as it became legally required that any system making use of R22 and became faulty must be replaced.

Generally, R22 owners in commercial applications are now responsible for checking for leaks, record keeping as well as labelling of equipment using this type of gas. Failure to comply with these directives can lead to hefty fines.

Existing refrigeration and air conditioning equipment that makes use of R22 can still be used. However, the owner of the equipment will be denied any rights to purchase extra tanks of gas that’ll keep the equipment running. In the event whereby an air conditioning system requires a complete recharge of the R22 refrigerant, according to the law, it’ll be considered obsolete and therefore will have to be replaced. What’s more? As the remaining supplies of R22 starts to decline, the price of getting the refrigerant is expected to skyrocket. As a result, do not be shocked if the cost of purchasing more R22 to keep your current equipment running outweighs the cost of replacing your existing equipment with a new and environmentally approved one.

As R22 is gradually being phased out, there are new ozone friendly alternatives which are being introduced into the refrigerant market. Out of these alternatives, the most common one is the R410A, which is purely a combination of hydrofluorocarbons which does not deplete the ozone layer.

Conservatories are a very popular structure in the UK, however one of their major setbacks is the fact that they can easily overheat or get too cold. This is something all conservatory owners in the UK can relate with as it often gets too hot during the warmer months and can also easily get too cold during the winter months. As a result of this, there’s a need for good calculations to be carried out by a professional surveyor to ensure that enough cooling power is recommended. If you own a conservatory and you’re thinking about installing a heating and cooling system to make the space very comfortable and relaxing, then you’d probably want to know what the best conservatory air conditioning system is. In this post, we aim to give you an in depth insight into this to help make sure you make the best informed decision possible. Let’s take a look!

Generally, low wall mounted air conditioners are often the best choice when it comes to conservatory air conditioning. As a result of the large amount of glass used in conservatory construction, several conservatories don’t have full sized solid walls. Consequently, specialist low wall mounted units can be installed quite easily. They tend to be a bit more costly than the conventional high wall units, however they’re able to offer an impressive solution to resolve the problem. What’s more? Low wall mounted air conditioning systems are also visually appealing because as with radiators, they are positioned out of your line of sight in such a way that complements the room.

There are a range of air conditioning units on the market. You should be sure to choose one with the appropriate cooling output for the room where it will be placed. Professional air conditioning companies will be able to advise you of the most suitable units for your rooms.

As the name suggests, these are air conditioning units that are specifically designed to be installed indoors. Unlike the conventional air conditioning system which involves installing a rather unattractive box on the outside of the building, internal air conditioning units are full fledged AC system which doesn’t involve having to make penetrations through the external walls. This could be as a result of the weather proof nature of the building or any other exterior skin features which acts as a restriction and makes the installation of a traditional air conditioning unit on the outside of your building simply illogical.

So how exactly does internal air conditioning units work? Well, most systems features the following components:

• The fan coil or room unit which is retrofitted high up on the interior wall of the room in question. Although, it can also be fitted into existing fittings as a concealed ducted unit during a refurbishment which makes it look a lot more attractive than the first option.
• The refrigeration pipe work then runs from the unit hidden behind the walls or ceilings, to the condenser box. The condenser box is usually the part that goes outside. However, it’s still installed inside the systems, mostly in a concealed space such as under the kitchen counter.

The benefits of installing internal air conditioning systems include the following:

• They are smart systems which is fully controllable with WiFi
• They filter the air, sucking dust, pollutants as well as other allergens from your building
• They most possesses some exciting features like the blackout technology as well as the i-Feel temperature control
• They’re just as effective in cooling and dehumidifying as any traditional air conditioning system.