Find an Air Conditioning Engineer you can trust in Lymington.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

NO - as air conditioning systems use fluorinated gases as refrigerants, all work on them must be done by professionals holding valid F-Gas certification. There is a range of different qualifications and certifications that apply for this, so it's always best to ask someone who is qualified to do this.

Having its usage banned in air conditioning systems and many other refrigeration applications due to the danger it poses to the ozone layer, several companies that are affected by the R22 legislation would possess a policy to identify specific recommended alternatives. If you’re also affected by this new legislation, then you’ve come to the right place. Generally, the alternative that’s selected is usually dependent on the business unit level as well as the business’ energy efficiency requirements.  In this post, we’re going to consider some of the recommended alternatives to the R22 refrigerant. Let’s take a look!

• R140a. This refrigerant is commonly used in industrial refrigeration, residential air conditioning, industrial air conditioning as well as commercial centrifugal compressors.
• R134A. This refrigerant is commonly used in domestic refrigeration, commercial refrigeration, transport refrigeration, residential air conditioning, commercial centrifugal compressors and mobile air conditioning.
• R407C. This is commonly incorporated in industrial refrigeration, residential air conditioning and commercial air conditioning.
• R407A. This type of gas is commonly incorporated in commercial refrigeration, plug ins as well as vending machines.
• MO99 ( R438A). This gas type is common applied in commercial refrigeration, plug ins, vending machines, industrial refrigeration as well as residential air conditioning.
• RS-44b. This is commonly used in all refrigeration systems.

These R22 alternatives are all believed to be environmental friendly having little to no impact on the ozone layer. However, one drawback possessed by of these alternatives is when POE oil is incorporated. This can result in excess moisture which causes acid build up inside the refrigerant lines. What’s more? These refrigerant alternatives also work at a higher pressure which means that it may cause more wear and tear on components.

As the heat start to come up especially during the summer months, the swelter will mercifully be kept in check by air conditioning. The technology has made a significant impact on modern life and it can now be considered a norm for all new and modern homes. So if you’re also planning to fit new HVAC air conditioning systems in your home or property, you may also be interested in knowing exactly how it works. In this article, we aim to provide you with an in depth insight into how air conditioning operates. Now let’s take a closer look at the process!

✓ A grille at the bottom of the machine absorbs warm air from the room

✓ The warm air is transmitted over some chiller pipes through which a coolant fluid is circulating. Working in a similar fashion as the chiller cabinet in a refrigerator, this part cools down the transmitted warm air and any excess moisture is duly removed by a dehumidifier.

✓ The air is then transmitted over a heating element which is quite similar to the one present in a fan heater. On a cold day, this part of the unit can be turned up in order to allow the HVAC works as heater.

✓ A fan which is positioned at the top blows the air back through another grilled into the room.

✓ Coolant flows through the the chiller pipes. In the process, it carries heat from the air blowing past the pipes and then it evaporates - converting the cool liquid into a hotter gas. This heat is then transported to the outside of the building from inside the room.

✓ With time, the heat inside the building slowly blows away into the outside air.

When it comes to getting an air conditioning unit for your property, one of the greatest mistakes you can possibly make is purchasing and installing the wrong type as well as size in your personal space. In the event whereby you happen to go for an AC unit that’s too small, it won’t be powerful enough to cool your room as you would like. However, when you go ahead to select an oversized AC unit, your room would be cooled relatively quick but will leave the air in your room with excess humidity and consume more electricity as it’s going to cycle on and off which will ultimately cost you more money. As a result, it’s always a smart move to put some things into consideration before making any financial commitment. In this post, we’re going to consider how you can determine the perfect air conditioner for your building. Let’s take a look!

• Determine the appropriate size for your space. When buying a new air conditioner, one mistake you should never make is getting the wrong size. A unit that’s too small will have to work overtime to achieve the set temperature for the room and driving up your energy bills, while a unit that’s too large will cool the air pretty easily and quickly but leave it damp and clammy. To get the appropriate size, you’ll have to take the measurement of the room’s square footage using a tape measure, calculate the room’s square footage and determine the cooling capacity required for the room in question which is measured in British Terminal Units (BTUs)/hour.
• Look out for the ENERGY STAR® certification. It’s crucial to buy and install an air conditioning system with the blue ENERGY STAR® certification. This means that the unit has met or exceeded certain higher efficiency standards than other similar models.

If you’ve made the decision to purchase an air conditioning system for your office, the next step is deciding whether to install the unit yourself or get in touch with a professional for help. To several business owners, this is a very simply decision to make, - a lot of money can be saved by making the task a DIY project. However, the installation of a heating and cooling system requires some specific skills and knowledge that, when not properly mastered, can lead to some installation faults which will ultimately make the system consume more energy than necessary while also affecting its durability. On the other hand, installation done by a well trained professional will not only save you a lot of money, but will also ensure you get to enjoy your system for a long period of time.

If you’re yet to be convinced about the importance of a professionally installed office air conditioning system, here are some point that just might make you have a rethink.

• Professionals are experienced and highly skilled. When it comes to the installation of heating and cooling systems in a work environment, there’s a need to call in a reliable professional. This is because AC system installation requires a well trained individual who know just how best to ensure your AC system works efficiently and for a long period of time.
• Most professionals are insured. When you call in an insured office air conditioning expert, you’ll have a peace of mind knowing you’re fully covered in case something goes wrong during the installation process.
• Professionals able to provide expert advice. Having a good experience in field and good knowledge of heating and cooling systems, professionals are able to provide helpful tips such as maintenance procedures so as to ensure you get to enjoy your investment for a prolonged period.

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

Are you trying to choose the perfect air conditioning unit for your home or property? Or perhaps you’re simply trying to figure out if it could be the right climate control option for your house. Regardless of your purpose, determining the amount AC systems cost to run can play a key role in identifying what your best options really are.

Obtaining estimates for the amount your new air conditioning units will cost to run may not be on top of your priority list and even more so if you’re always busy trying to determine the installation price. However, it won’t be the wisest decision to procure a new air conditioning system you can’t afford to use.

There are a lot of factors that determines the cost of running an air conditioning system. However, to give a rough idea of how much it’ll cost to run your new AC system, here’s a cost guide for two of the most popular types of air conditioning - split and multi split units.

For a small room size with an air conditioning output of about 2.5 kW, the cost to run per hour is about £10. Meanwhile,a mid-sized room with an air conditioning output of about 3.5 kW, the cost to run per hour is about £14. And lastly, a large room size with an air conditioning output of about 5 kW, the cost to run per house will be about £20.

In the event whereby you’re eager to fit a new air conditioning system, your best bet for a more accurate quote will be to get in touch with an air conditioning technician who will go through your unique project as well as the price influencing factors to provide a unique price for your project as well as its running cost.