Find an Air Conditioning Engineer you can trust in Longfield.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

We all know how helpful air conditioning systems can be especially during the hot summer season which is great at making your home feel nothing less than an inferno. So if you have an AC system, you’d probably want to know if leaving it on will be cheaper and more efficient.

The short and simple answer to this question is yes, leaving your air conditioning system on will make make it cheaper and more efficient. This isn’t what you or many other people will have in mind though. Under no circumstances should you leave you air conditioning system on full blast 24/7. To make your air conditioning system more efficient by leaving it on has a right and wrong way you can go about it. Let’s have a look!

If you’d ever noticed, any time you turn your air conditioner off during a very a hot day, even if it’s for just a couple of hours, things tend to get thrown out of balance pretty quickly. When turned back on, your AC system will have to work even harder to restore the usual comfort levels in the room. When you abuse this dial in such a fashion, the AC system can only become more inefficient rather than making your home more comfortable quickly.

On the other hand, your AC system ( when tuned to the right settings) can help maintain the proper temperature and humidity balance within your home instead of turning it off while away. And upon getting back, you can simply turn down the thermostat a bit which helps you prevent the usual stagnant air that you’d be hit with when your return home (with the AC system turned off) that’ll have you racing for the dial.

As the summer months draw nearer, you get better accustomed to the ambient noise produced by your air conditioning system which is constantly in operation to keep your home cool and comfortable for both you and your loved ones. During this period, it’s absolutely normal to expect a spike in your energy bill and wish to know how you can limit the expenses without having to sacrifice your home’s temperature. In this guide, we’re going to consider some of the major ways you can save energy in your home without having to sacrifice your air conditioning system. Let’s take a look!

1. Reduce phantom loads. This is an electronic appliance that still makes use of energy even when turned off and not in operation. These phantom loads are actually everywhere in your home but you just don’t know that the television, toaster or even your phone’s charger continue to suck electricity when they’re not in use.
2. Incorporate more energy-efficient appliances. Before making a purchase, ensure that the appliance has the Environmental Protection Agency’s Energy Star Label as they use 10 to 15 percent less energy than their counterparts.
3. Change out your light bulbs. The older your incandescent light bulb gets, the more energy it consumes. You can cut cost by reglarly changing them out.
4. Install a programmable thermostat. With such a device, you can adjust your home’s temperature to your schedule and needs to cover for the time when you would not be home.
5. Use fan. A cooling fan can significantly lower the cost of running an AC system.
6. Seal all air leaks. Blocking all air leaks in your home is a great way to ensure energy is well maximized
7. Make your windows more efficient.
8. Enhance you insulation
9. Conduct a regular servicing of your AC unit
10. Setting the air conditioning temperature higher at night

NO - as air conditioning systems use fluorinated gases as refrigerants, all work on them must be done by professionals holding valid F-Gas certification. There is a range of different qualifications and certifications that apply for this, so it's always best to ask someone who is qualified to do this.

In several parts of the UK, air conditioning systems are a must especially in the warmer summer months. Fortunately, if your AC system isn’t functioning the way it’s supposed to, suffers frequent system breakdowns when overworked mostly during the hot summer days or perhaps you’re just tired of just having to manage with window units, the latest air conditioning units offers both features and performance that’s superior to the earlier models. And as you would have expected, each facet comes with a cost.

There are a number of factors that can determine the cost of an air conditioning unit. Out of all these factors, the size of your home happens to be the most significant factor that influences an air conditioning unit’s cost. Air conditioning systems are measured in tons, which is a measure of the amount of heat they’re able to remove from a home within an hour. As a rule of thumb, you’ll require about 1 ton of cooling per 500 to 600 square feet. Unfortunately, the square footage alone can’t be used to determine the tonnage. Other factors that’ll also play a significant role includes the efficiency of your most preferred AC unit, how well the home is insulated as well as the thermal nature of your home. On the average, a new air conditioning system for an average home should be within the range of £1000 to £3000 for a unit as well as the installation costs which can vary largely depending on the condition of your ducts. These figures may seem quite expensive, but when the hot summer days come, you’d be glad to have had one installed in your home.

Having its usage banned in air conditioning systems and many other refrigeration applications due to the danger it poses to the ozone layer, several companies that are affected by the R22 legislation would possess a policy to identify specific recommended alternatives. If you’re also affected by this new legislation, then you’ve come to the right place. Generally, the alternative that’s selected is usually dependent on the business unit level as well as the business’ energy efficiency requirements.  In this post, we’re going to consider some of the recommended alternatives to the R22 refrigerant. Let’s take a look!

• R140a. This refrigerant is commonly used in industrial refrigeration, residential air conditioning, industrial air conditioning as well as commercial centrifugal compressors.
• R134A. This refrigerant is commonly used in domestic refrigeration, commercial refrigeration, transport refrigeration, residential air conditioning, commercial centrifugal compressors and mobile air conditioning.
• R407C. This is commonly incorporated in industrial refrigeration, residential air conditioning and commercial air conditioning.
• R407A. This type of gas is commonly incorporated in commercial refrigeration, plug ins as well as vending machines.
• MO99 ( R438A). This gas type is common applied in commercial refrigeration, plug ins, vending machines, industrial refrigeration as well as residential air conditioning.
• RS-44b. This is commonly used in all refrigeration systems.

These R22 alternatives are all believed to be environmental friendly having little to no impact on the ozone layer. However, one drawback possessed by of these alternatives is when POE oil is incorporated. This can result in excess moisture which causes acid build up inside the refrigerant lines. What’s more? These refrigerant alternatives also work at a higher pressure which means that it may cause more wear and tear on components.

As the heat start to come up especially during the summer months, the swelter will mercifully be kept in check by air conditioning. The technology has made a significant impact on modern life and it can now be considered a norm for all new and modern homes. So if you’re also planning to fit new HVAC air conditioning systems in your home or property, you may also be interested in knowing exactly how it works. In this article, we aim to provide you with an in depth insight into how air conditioning operates. Now let’s take a closer look at the process!

✓ A grille at the bottom of the machine absorbs warm air from the room

✓ The warm air is transmitted over some chiller pipes through which a coolant fluid is circulating. Working in a similar fashion as the chiller cabinet in a refrigerator, this part cools down the transmitted warm air and any excess moisture is duly removed by a dehumidifier.

✓ The air is then transmitted over a heating element which is quite similar to the one present in a fan heater. On a cold day, this part of the unit can be turned up in order to allow the HVAC works as heater.

✓ A fan which is positioned at the top blows the air back through another grilled into the room.

✓ Coolant flows through the the chiller pipes. In the process, it carries heat from the air blowing past the pipes and then it evaporates - converting the cool liquid into a hotter gas. This heat is then transported to the outside of the building from inside the room.

✓ With time, the heat inside the building slowly blows away into the outside air.

The importance of having your office heating and cooling system serviced on a regular basis simply can’t be overemphasized. Not only does it ensure the proper functioning of your system, but it also ensures it’s energy efficiency, helps you save some cool cash and and also ensures that a great indoor air quality is maintained. However, what discourages most business owners from servicing their air conditioning unit on a regular basis is the fear that the cost of doing so might be high and since the unit is not giving any issues yet, then any required maintenance efforts can be overlooked. The reality here is, no matter how high the cost of servicing your office air conditioning system seems to be, you’d have to pay higher to get it fixed when it starts developing series of faults that could have been prevented with proper maintenance. In this post, we’re going to consider the cost involved in the servicing of office air conditioning systems. Let’s take a look!

First and foremost, you should note that during an office air con service, the refrigerant will be recharged and the complete quantity of refrigerant is pumped out of the AC system weighed, filtered and dried. Once done, the AC system will be re-gassed with the quantity of refrigerant prescribed by the manufacturer. Furthermore, the quantity of the AC compressor oil is also changed with the same amount of fresh oil. A vacuum test will also be carried out to determine whether or not there are damages or leaks in the AC system which has to be fixed.

The cost of an office air con service depends on a number of factors including quantity and type of refrigerant required, location and more. On the average, the amount you can expect to incur to service your air conditioning system would be within the range of £60 to £90.