Find an Air Conditioning Engineer you can trust in Sheerness.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

What Is Central Air Conditioning System?

Central air conditioning system is a system which operates by cooling air at a central place and distributes the cooled air to and from rooms with the help of one or more fans and ductwork. What makes the whole idea of air conditioning feasible is the operations of the air conditioner compressor. When it cooling gas is compressed, it allows it to absorb heat from the house and blows it outside into the outside air and that’s exactly how the cool air is being generated.

Central air conditioning are of two main types which includes a split system as well as a packaged unit.

Generally, in the split system AC unit, both the condenser and compressor are included in the outdoor metal cabinet, whereas the indoor cabinet includes the evaporator. Typically, in several split system air conditioning units, the indoor cabinet will also include an air handler or a furnace. What’s more? The evaporator coil of the AC unit is fitted in the cabinet or the furnace or heat pump’s primary supply duct. This type of central air condition is usually the most economical AC unit to fit if you already have a furnace in your home.

However, in a packaged central air conditioning system, the components including condenser, compressor and evaporator are all included in one cabinet. Supply of air as well as the return ducts are connected through the home’s exterior wall or roof to the package central air conditioning system - mostly placed outdoors. This type of central air conditioners also features electric heating oil or a natural gas furnace. With this perfect blend of central heater with air conditioner, there’s simply no need to a separate furnace indoors.

Conservatories are a very popular structure in the UK, however one of their major setbacks is the fact that they can easily overheat or get too cold. This is something all conservatory owners in the UK can relate with as it often gets too hot during the warmer months and can also easily get too cold during the winter months. As a result of this, there’s a need for good calculations to be carried out by a professional surveyor to ensure that enough cooling power is recommended. If you own a conservatory and you’re thinking about installing a heating and cooling system to make the space very comfortable and relaxing, then you’d probably want to know what the best conservatory air conditioning system is. In this post, we aim to give you an in depth insight into this to help make sure you make the best informed decision possible. Let’s take a look!

Generally, low wall mounted air conditioners are often the best choice when it comes to conservatory air conditioning. As a result of the large amount of glass used in conservatory construction, several conservatories don’t have full sized solid walls. Consequently, specialist low wall mounted units can be installed quite easily. They tend to be a bit more costly than the conventional high wall units, however they’re able to offer an impressive solution to resolve the problem. What’s more? Low wall mounted air conditioning systems are also visually appealing because as with radiators, they are positioned out of your line of sight in such a way that complements the room.

When it comes to getting an air conditioning unit for your property, one of the greatest mistakes you can possibly make is purchasing and installing the wrong type as well as size in your personal space. In the event whereby you happen to go for an AC unit that’s too small, it won’t be powerful enough to cool your room as you would like. However, when you go ahead to select an oversized AC unit, your room would be cooled relatively quick but will leave the air in your room with excess humidity and consume more electricity as it’s going to cycle on and off which will ultimately cost you more money. As a result, it’s always a smart move to put some things into consideration before making any financial commitment. In this post, we’re going to consider how you can determine the perfect air conditioner for your building. Let’s take a look!

• Determine the appropriate size for your space. When buying a new air conditioner, one mistake you should never make is getting the wrong size. A unit that’s too small will have to work overtime to achieve the set temperature for the room and driving up your energy bills, while a unit that’s too large will cool the air pretty easily and quickly but leave it damp and clammy. To get the appropriate size, you’ll have to take the measurement of the room’s square footage using a tape measure, calculate the room’s square footage and determine the cooling capacity required for the room in question which is measured in British Terminal Units (BTUs)/hour.
• Look out for the ENERGY STAR® certification. It’s crucial to buy and install an air conditioning system with the blue ENERGY STAR® certification. This means that the unit has met or exceeded certain higher efficiency standards than other similar models.

Do you wish to save money on your air conditioning expenses and energy bills? If yes, then you’ve come to the right place. In this post, we’re going to consider some of the common myths you shouldn’t buy into if you really wish to save some money on your air conditioning system. Let’s take a look!

• The size of the system does not matter. This is one of the biggest mistakes you can make when purchasing an air conditioning system. A too large system will not only consume more energy meaning more higher heating bills, but will also keep turning off till it finally breaks down. And on the other hand, a system that’s too small would have to work harder to have your space cooled which means that it’ll wear down sooner. Consult a specialist in order to determine the right size of HVAC unit for your home.
• Turn down the temperature for a faster cooling. The fact here is, your AC system works just as hard whether you lower it 4 degrees or 25 degrees. Therefore, getting the temperature you want is just a matter of time. Also, you can end up paying a higher bill if you set it lower than you need to and in the process you happen to forget about it. Here, using a programmable thermostat can save you money and you’ll also get the temperature you really want.
• You don’t have to change the air filters. This is an idea you never buy into if you wish to save money. Air filters are usually inexpensive and can save you huge repair costs as well as heating bills on the long run. Normally, air filters should be replaced every 30 to 90 days by a specialist.

Having its usage banned in air conditioning systems and many other refrigeration applications due to the danger it poses to the ozone layer, several companies that are affected by the R22 legislation would possess a policy to identify specific recommended alternatives. If you’re also affected by this new legislation, then you’ve come to the right place. Generally, the alternative that’s selected is usually dependent on the business unit level as well as the business’ energy efficiency requirements.  In this post, we’re going to consider some of the recommended alternatives to the R22 refrigerant. Let’s take a look!

• R140a. This refrigerant is commonly used in industrial refrigeration, residential air conditioning, industrial air conditioning as well as commercial centrifugal compressors.
• R134A. This refrigerant is commonly used in domestic refrigeration, commercial refrigeration, transport refrigeration, residential air conditioning, commercial centrifugal compressors and mobile air conditioning.
• R407C. This is commonly incorporated in industrial refrigeration, residential air conditioning and commercial air conditioning.
• R407A. This type of gas is commonly incorporated in commercial refrigeration, plug ins as well as vending machines.
• MO99 ( R438A). This gas type is common applied in commercial refrigeration, plug ins, vending machines, industrial refrigeration as well as residential air conditioning.
• RS-44b. This is commonly used in all refrigeration systems.

These R22 alternatives are all believed to be environmental friendly having little to no impact on the ozone layer. However, one drawback possessed by of these alternatives is when POE oil is incorporated. This can result in excess moisture which causes acid build up inside the refrigerant lines. What’s more? These refrigerant alternatives also work at a higher pressure which means that it may cause more wear and tear on components.

There are a range of air conditioning units on the market. You should be sure to choose one with the appropriate cooling output for the room where it will be placed. Professional air conditioning companies will be able to advise you of the most suitable units for your rooms.