Find an Air Conditioning Engineer you can trust in Barkingside.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

Several individuals think that the the way their air conditioning system works is simply by pumping hot air out of their homes or offices, blowing a cool air in return. This is absolutely wrong! The hot air is, in fact, cycled back in as cold air and this process continues until the thermostats gets dropped down to the required or set temperature. The air conditioning system manages this in a similar way to how the refrigerator manages to stay cold and of course, excluding the insulated box.

The short and simple answer to the question of what gas an air conditioning use is Freon. This is a non inflammable gas which is subjected to the evaporation process over and over again in most refrigerators to keep the temperature at a low level. This same process is repeated in air conditioning systems. Now let’s take a look at how the Freon gas is incorporated in AC systems.

The cold Freon gas is firstly compressed by a compressor in the air conditioner. The gas is then combined with a little quantity of oil in order to lubricate the compressor. When Freon gas is compressed, the pressure is increased which makes it incredibly hot. It then moves through a couple of coils which works to lowering the heat and turning it to liquid. This Freon liquid will then be transmitted via an expansion valve which causes it to cool down until evaporation takes place. The outcome of this is a low pressure cold Freon gas which is then transmitted via another set of coils allowing the gas to collect the heat and lower the air within the room.

The air conditioner now filters the air and clears out the dust, smoke, pollen and other kinds of air pollutants. The system also absorbs excess liquid from the air too which it uses to cool down the system and pump it through a hose.

As the name suggests, these are air conditioning units that are specifically designed to be installed indoors. Unlike the conventional air conditioning system which involves installing a rather unattractive box on the outside of the building, internal air conditioning units are full fledged AC system which doesn’t involve having to make penetrations through the external walls. This could be as a result of the weather proof nature of the building or any other exterior skin features which acts as a restriction and makes the installation of a traditional air conditioning unit on the outside of your building simply illogical.

So how exactly does internal air conditioning units work? Well, most systems features the following components:

• The fan coil or room unit which is retrofitted high up on the interior wall of the room in question. Although, it can also be fitted into existing fittings as a concealed ducted unit during a refurbishment which makes it look a lot more attractive than the first option.
• The refrigeration pipe work then runs from the unit hidden behind the walls or ceilings, to the condenser box. The condenser box is usually the part that goes outside. However, it’s still installed inside the systems, mostly in a concealed space such as under the kitchen counter.

The benefits of installing internal air conditioning systems include the following:

• They are smart systems which is fully controllable with WiFi
• They filter the air, sucking dust, pollutants as well as other allergens from your building
• They most possesses some exciting features like the blackout technology as well as the i-Feel temperature control
• They’re just as effective in cooling and dehumidifying as any traditional air conditioning system.

If you want to guarantee the comfort of those inside your work environment, getting a commercial HVAC system should be a top priority. And if you already have one installed, knowing the best time to have it replaced rather than repaired will go a long way to save you some huge bucks. For instance, an air conditioning system that’s old and malfunctioning is best replaced due to the fact that all the components are probably weak and can only keep generating series of faults till it finally breaks down beyond repair. When evaluating your air conditioning unit, there are some factors that you’ll need to take into account to save yourself some money and headaches. Let’s take a look!

• Age. If your commercial HVAC system is within 15 to 20 years old and starting to look like a giant rust attached to your building, then its probably time to get a replacement. Also when old, most commercial air con systems are usually much less efficient and will consume more energy which implies higher energy bills.
• Wear and tear. If your system has experienced a significant amount of wear and tear, then its probably not heating or cooling as efficiently as it used to. Depending on the product’s quality as well as the level of maintenance many commercial HVAC system would be overdue for an upgrade by the time they’re about 15 years old.
• Malfunctions. When it comes to heating and cooling systems, some issues are quite easy to fix or resolve while others ( such as a broken furnace fan or refrigerant problems) should be best left to the experts. However, if the malfunctions are becoming more often or serious enough, then you should probably consider getting an upgrade.

Also referred to as Freon, the refrigerant “R22 is a commonly used chlordiflouromethane that’s usually incorporated in air conditioning systems as well as many other refrigeration applications. However, because of the evidence discovered which shows the gas can contribute to the damage of the ozone layer, the refrigerant has now been banned since Dec 31, 2009 as it became legally required that any system making use of R22 and became faulty must be replaced.

Generally, R22 owners in commercial applications are now responsible for checking for leaks, record keeping as well as labelling of equipment using this type of gas. Failure to comply with these directives can lead to hefty fines.

Existing refrigeration and air conditioning equipment that makes use of R22 can still be used. However, the owner of the equipment will be denied any rights to purchase extra tanks of gas that’ll keep the equipment running. In the event whereby an air conditioning system requires a complete recharge of the R22 refrigerant, according to the law, it’ll be considered obsolete and therefore will have to be replaced. What’s more? As the remaining supplies of R22 starts to decline, the price of getting the refrigerant is expected to skyrocket. As a result, do not be shocked if the cost of purchasing more R22 to keep your current equipment running outweighs the cost of replacing your existing equipment with a new and environmentally approved one.

As R22 is gradually being phased out, there are new ozone friendly alternatives which are being introduced into the refrigerant market. Out of these alternatives, the most common one is the R410A, which is purely a combination of hydrofluorocarbons which does not deplete the ozone layer.

We all know how helpful air conditioning systems can be especially during the hot summer season which is great at making your home feel nothing less than an inferno. So if you have an AC system, you’d probably want to know if leaving it on will be cheaper and more efficient.

The short and simple answer to this question is yes, leaving your air conditioning system on will make make it cheaper and more efficient. This isn’t what you or many other people will have in mind though. Under no circumstances should you leave you air conditioning system on full blast 24/7. To make your air conditioning system more efficient by leaving it on has a right and wrong way you can go about it. Let’s have a look!

If you’d ever noticed, any time you turn your air conditioner off during a very a hot day, even if it’s for just a couple of hours, things tend to get thrown out of balance pretty quickly. When turned back on, your AC system will have to work even harder to restore the usual comfort levels in the room. When you abuse this dial in such a fashion, the AC system can only become more inefficient rather than making your home more comfortable quickly.

On the other hand, your AC system ( when tuned to the right settings) can help maintain the proper temperature and humidity balance within your home instead of turning it off while away. And upon getting back, you can simply turn down the thermostat a bit which helps you prevent the usual stagnant air that you’d be hit with when your return home (with the AC system turned off) that’ll have you racing for the dial.

If used and maintained properly, air conditioning can actually be a great way to create a healthier environment. As well as controlling the temperature, it also filters your air, removing pollutants like dust, pollen and mould particles.

However, to maximise these benefits, it’s important to keep your system clean. Dirty units and systems can become a health hazard, so always make sure you service your air conditioning at least once or twice a year.

With summer fast approaching, most business owners are getting ready to battle the great heat that often comes with it. One of the most important tasks would be to make sure that the commercial HVAC system is in top condition to run efficiently and smoothly through to help lessen or cancel out the effect of the summer’s heat in the work environment. Air conditioning systems when not properly maintained can take up to 30 percent energy which is capable of sending your utility bills through the roof during the season that calls for a heavy usage. In this post, we’re going to consider some top tips you can implement to prepare your commercial unit for summer air conditioning. Let’s take a look!

• Filter cleaning and maintenance. When the filter is clogged the cooling is decrease and more energy is consumed (implying higher electricity bills) as the unit works harder to have your work environment cooled. The filter accumulate dust, dirt and other particles pretty easily which also affects the indoor air quality since they’ll get pushed out with the cool air distributed. Therefore, there’s a need to ensure that the filters are washed regularly and also changed (at least once a month during summer).
• Air flow leaks and obstructions. If the blower components aren’t properly adjusted, this can lead to a 15 percent drop in the system’s efficiency. Also, gaps and obstructions in duct work can lower air flow in the HVAC unit. Therefore, you’ll need to check the ducts and connectors for loose spots or damages, also check walls, doors and windows for cracks and leaks which can allow the outside warmth to draft in and the cool air to flow out.