Find an Air Conditioning Engineer you can trust in Dunkeld.

Are you planning to install a new climate control in your home or property? If yes, then there are a number of things you’d have to consider before making a financial commitment and that’s related to air conditioning planning permission. It’s crucial to equip yourself with the facts so as to avoid any hiccups along the ways and end up with an AC system that works well and complies with all relevant air conditioning regulations. In this post, we’re going to give you a good insight into planning permission for air conditioning in homes. Let’s take a look!

In general, majority of small air conditioning installations do not need planning permission. In other words, you don’t have to submit a planning permission application to install an air conditioning system in your home or property – if you want to, simply go ahead with it. However, there’s a need to ensure that your external air conditioning units meet some regulations. These regulations include:

• It isn’t bigger than 0.6m3
• It’s over a metre from the boundaries of any property
• It’s more than a metre away from the edge of a flat roof
• It shouldn’t be fitted on a pitched roof

In addition, you’d have to ensure that there isn’t a wind turbine on the property. For a more accurate information, it’s more advisable to reach out to your local authority for advice on air conditioning planning permission before installing your air conditioning unit. They’re in a much better position to advise you on how to ensure that your air conditioning complies with the relevant regulations as well as whether or not you’ll need a planning permission.
 

Also referred to as Freon, the refrigerant “R22 is a commonly used chlordiflouromethane that’s usually incorporated in air conditioning systems as well as many other refrigeration applications. However, because of the evidence discovered which shows the gas can contribute to the damage of the ozone layer, the refrigerant has now been banned since Dec 31, 2009 as it became legally required that any system making use of R22 and became faulty must be replaced.

Generally, R22 owners in commercial applications are now responsible for checking for leaks, record keeping as well as labelling of equipment using this type of gas. Failure to comply with these directives can lead to hefty fines.

Existing refrigeration and air conditioning equipment that makes use of R22 can still be used. However, the owner of the equipment will be denied any rights to purchase extra tanks of gas that’ll keep the equipment running. In the event whereby an air conditioning system requires a complete recharge of the R22 refrigerant, according to the law, it’ll be considered obsolete and therefore will have to be replaced. What’s more? As the remaining supplies of R22 starts to decline, the price of getting the refrigerant is expected to skyrocket. As a result, do not be shocked if the cost of purchasing more R22 to keep your current equipment running outweighs the cost of replacing your existing equipment with a new and environmentally approved one.

As R22 is gradually being phased out, there are new ozone friendly alternatives which are being introduced into the refrigerant market. Out of these alternatives, the most common one is the R410A, which is purely a combination of hydrofluorocarbons which does not deplete the ozone layer.

If you have a conservatory constructed on your property, then you should be able to to tell how uncomfortable it can get considering the UK’s harsh climate. This climate can get swelteringly hot during the summer months and also quite chilly during the winter months. As a result of being constructed with so many plain glass, conservatories are usually at the mercy of the weather outside which often limits the usage of the structure to only a few months within the year. Hence, the need to have an air conditioning system installed by a reliable professional so as to ensure you enjoy your conservatory all year round. In this post, we’re going to consider some of the benefits you stand to derive by hiring experts to install your conservatory’s air conditioning.

• They possess the experience, skills and tools necessary to complete the project. When the construction job done right the first time, this will go a long way to save you both time and money on potential costly mistakes if you decide to undertake the project yourself.
• They can help keep your project on budget. When it comes to fitting appliances like AC systems, it’s usually very easy to go over your budget when done alone. Since expert conservatory air conditioning installers are vastly experienced in the field, they know the cost implication for the task and can help ensure you don’t overspend or go over your budget.
• They’re insured. The benefit of hiring an insured professional can’t be overstated. What this gives you is total peace of mind knowing fully well if anything goes wrong during the installation process, you’re fully covered by the expert’s insurance company.

If you’ve made the decision to purchase an air conditioning system for your office, the next step is deciding whether to install the unit yourself or get in touch with a professional for help. To several business owners, this is a very simply decision to make, - a lot of money can be saved by making the task a DIY project. However, the installation of a heating and cooling system requires some specific skills and knowledge that, when not properly mastered, can lead to some installation faults which will ultimately make the system consume more energy than necessary while also affecting its durability. On the other hand, installation done by a well trained professional will not only save you a lot of money, but will also ensure you get to enjoy your system for a long period of time.

If you’re yet to be convinced about the importance of a professionally installed office air conditioning system, here are some point that just might make you have a rethink.

• Professionals are experienced and highly skilled. When it comes to the installation of heating and cooling systems in a work environment, there’s a need to call in a reliable professional. This is because AC system installation requires a well trained individual who know just how best to ensure your AC system works efficiently and for a long period of time.
• Most professionals are insured. When you call in an insured office air conditioning expert, you’ll have a peace of mind knowing you’re fully covered in case something goes wrong during the installation process.
• Professionals able to provide expert advice. Having a good experience in field and good knowledge of heating and cooling systems, professionals are able to provide helpful tips such as maintenance procedures so as to ensure you get to enjoy your investment for a prolonged period.

It can be quite tricky knowing the right time to purchase and fit an air conditioning system, however if you get the timing right, this can go a long way to help you save both time and money. It’s important to note that different individuals usually have varying needs - like it it’s possible your existing unit just broke down during the summer months or you’re carrying out some renovations during spring.

In general, there’s the need to put a couple of factors into consideration in order to make sure you AC installation is a hassle free experience. The best time to install an air conditioner is actually before the construction of the house. Several high set homes do not possess the space to fit fully ducted air after building. And even if there’s space, accessing the ceiling and down into the floors can be pretty expensive and difficult.

Installing an air conditioning unit earlier would mean less plaster would be required later down the road. A good air conditioning installer or HVAC expert should also advice you on the best location for the unit in order to help you maximize cooling in the summer and heating in the winter. Most importantly, if your AC unit is built into your house’s design, you’ll be able to save more money in the long run. However, you may not be able to fit a unit when constructing or renovation, therefore choosing the right time would be a question of, when is the right time of the year.

Generally, choosing a month in the off-season is actually a much better time to fit an air conditioner, but ensure that it’s the right time. Overall, the best time for an air conditioning unit installation is autumn when the demand is at its lowest. Since retailers are usually overstocked with units after the summer months, you can get yourself some nice discounts

What is the essence of calling a place “home”, if it doesn’t guarantee your comfort? A home should serve as a getaway from the chaos outside world, where you can relax and spend great time with your family. However, what makes house really a home goes way beyond simply having a place to live and sleep. It’s a fact that we all love comfort and where else should one be able to get that if not inside one’s home? And that’s exactly where an air conditioning system comes in! However, having a heating and cooling system installed at home provides you with more benefits than just comfort. They also go a long way to ensure provide us with safety as well as a better quality of life within the four walls of our home. In this post, we’re going to look at some of the top reasons why you should get an air conditioning system installed at home.

• A more secure home. More often than not, when our personal space is air conditioned we keep the doors and windows closed which makes it a lot difficult for an intruder to break into the home.
• Reduced possibility of asthma attacks. Since an AC system is able to minimize your home’s humidity and reduce the amount of mold, mildew, pollen and other air borne outdoor allergens, the risk of suffering an asthma attack is greatly reduced.
• Reduced number of pests and parasites. It’s a fact that you can help even your dog fight off fleas with an AC system. Air conditioning filters are a lot more effective in preventing bugs entry into a hme than an open window.

With summer fast approaching, most business owners are getting ready to battle the great heat that often comes with it. One of the most important tasks would be to make sure that the commercial HVAC system is in top condition to run efficiently and smoothly through to help lessen or cancel out the effect of the summer’s heat in the work environment. Air conditioning systems when not properly maintained can take up to 30 percent energy which is capable of sending your utility bills through the roof during the season that calls for a heavy usage. In this post, we’re going to consider some top tips you can implement to prepare your commercial unit for summer air conditioning. Let’s take a look!

• Filter cleaning and maintenance. When the filter is clogged the cooling is decrease and more energy is consumed (implying higher electricity bills) as the unit works harder to have your work environment cooled. The filter accumulate dust, dirt and other particles pretty easily which also affects the indoor air quality since they’ll get pushed out with the cool air distributed. Therefore, there’s a need to ensure that the filters are washed regularly and also changed (at least once a month during summer).
• Air flow leaks and obstructions. If the blower components aren’t properly adjusted, this can lead to a 15 percent drop in the system’s efficiency. Also, gaps and obstructions in duct work can lower air flow in the HVAC unit. Therefore, you’ll need to check the ducts and connectors for loose spots or damages, also check walls, doors and windows for cracks and leaks which can allow the outside warmth to draft in and the cool air to flow out.

As the name suggests, these are air conditioning units that are specifically designed to be installed indoors. Unlike the conventional air conditioning system which involves installing a rather unattractive box on the outside of the building, internal air conditioning units are full fledged AC system which doesn’t involve having to make penetrations through the external walls. This could be as a result of the weather proof nature of the building or any other exterior skin features which acts as a restriction and makes the installation of a traditional air conditioning unit on the outside of your building simply illogical.

So how exactly does internal air conditioning units work? Well, most systems features the following components:

• The fan coil or room unit which is retrofitted high up on the interior wall of the room in question. Although, it can also be fitted into existing fittings as a concealed ducted unit during a refurbishment which makes it look a lot more attractive than the first option.
• The refrigeration pipe work then runs from the unit hidden behind the walls or ceilings, to the condenser box. The condenser box is usually the part that goes outside. However, it’s still installed inside the systems, mostly in a concealed space such as under the kitchen counter.

The benefits of installing internal air conditioning systems include the following:

• They are smart systems which is fully controllable with WiFi
• They filter the air, sucking dust, pollutants as well as other allergens from your building
• They most possesses some exciting features like the blackout technology as well as the i-Feel temperature control
• They’re just as effective in cooling and dehumidifying as any traditional air conditioning system.