Find an Asbestos Removal Contractor you can trust in Westerham.

By now, every homeower should be fully aware of the dangers of asbestos due to the fact that it can be found in a wide range of building products from the roofs and walls and right down to the floor tiles. An exposure to asbestos especially when disturbed can be life threatening as it can lead to a plethora of health issues which includes lung cancer, mesothelioma, asbestosis and lots more.

Asbestos are more dangerous when damaged or disturbed, but if they’re found in a great shape and are left undisturbed, then asbestos containing materials poses little to no threats. This dangerous material can be found in a large variety of insulation. And when compared to batt insulation, loose-fill insulation can be highly dangerous when it’s not installed in the right way. When poorly done, several particles of the asbestos can be released inside the wall or around pipes. As a result, insulation becomes a big worry that most homeowers will face down the road.

Homes that were constructed before the 1980’s commonly features steam pipes, hot water pipes as well as furnace ducts insulated with asbestos containing materials. And this is primarily because there’s no other fire retardant, thermal as well as acoustic insulator like asbestos that’s as effective and affordable as it is. However to really know if your building’s insulation is made with asbestos containing materials, you can take the following steps:

✓ Find out when your house was built. If it was constructed or renovated before the 1980’s then it’s likely to contain some asbestos materials.

✓ Although this is not advisable, but if you plan on checking the insulation by yourself, you should ensure to put on protect equipment such as goggles, gloves, masks and a safety suit.

✓ Check for insulation available in the building. The asbestos containing insulation in both batt and loose-fill types are grey-coloured so this shouldn’t be too hard to spot.

✓ Examine the pipe coverings especially the blanket type and cardboard coverings.

A typical Homebuyer Report or Building Survey Report doesn’t usually involve checking for asbestos. Your surveyor may let you know that there are certain parts of the property that are likely to contain asbestos, but they won’t do any testing. This means that, if you want to be sure about whether a property contains asbestos, you need to get an asbestos survey.

How To Dispose Of Asbestos?

As a homeowner, you certainly wouldn’t like to the word “asbestos” and understandably so. Due to its extremely dangerous fibres, the material was banned in the UK since 1999 and any structure built with it will be heavily fined. However, if you’re presently doing some home improvement project or buying a property that was built before the year 2000, then a chance exists that the property could contain asbestos. So if you’re unlucky to discover asbestos in your property, getting rid of it can be quite simple if you know way around it. In this article, we’ll provide you with some tips on how to dispose of asbestos in your property. Let’s take a closer look!

✓ Careful Handling

If you happen to find asbestos in your property the best thing to do is to call in a reliable specialist who has the proper training and equipment to tackle the project. However, if you decide to handle it yourself, then it’s a must to do this with great care. For instance wearing safety gloves, dust mask, safety goggles and placement of asbestos into plastic bags would be a great idea.

✓ Take It To The Tip By Yourself

To save some money if you have access to a vehicle, then loading the bagged asbestos into your car and driving it to the nearest local tip would be a simple and cost effective alternative. However, you should check with your local authorities before attempting this.

✓ Use A Specialist

Hiring a professional asbestos removal contractor is simply the best way to dispose of asbestos. Their services may be a bit expensive, but they cover up for that in both speed and effectiveness.

✓ Use Your Council’s Asbestos Collection Service

Several councils off this services at a reduced cost. However, they are usually not as quick as a specialist contractor.

The surveyors will check the entire property for signs of asbestos. They may take samples which can be taken away for anaylsis. If they find asbestos, they will inspect its condition, what grade it is and advise you of the best course of action to take.

There are all different types of Asbestos. Some kinds of asbestos, if they are in good condition, may be left as they are or covered up. If there is any danger of the asbestos being damaged and particles entering the air, it should be removed. Once a survey has been completed you will be advised on what course of action to take.

It’s a legal requirement to get an asbestos survey done on non-domestic buildings and public areas of domestic buildings if they were built before 2000. So, if you’re responsible for maintaining one of these types of building, you must find out if an asbestos survey has been conducted, and get one done if it hasn’t.

For domestic properties, you only need to get an asbestos survey done if your home was built before 2000 and you want to do some building work. This is because if any materials containing asbestos are damaged during the work, they could pose a serious health risk, so might need removing first.

However, if you’re worried about asbestos in any parts of your home that are deteriorating, you might want to get an asbestos survey done anyway.

If your house is built before the 1980’s it’s likely to contain some form of asbestos material which when disturbed can release some harmful fibres whose inhalation can lead to a number of fatal diseases and health issues like lung cancer and asbestosis. If you suspect that your house contains some asbestos materials, the best step to take is to call in a qualified asbestos consultant to carry out a thorough inspection of the area so as to identify the potential asbestos containing materials in your property.

The result of the testing done will bring a peace of mind as it’ll confirm whether or not the material actually contains asbestos. In the event whereby the testing result shows that the material does not contain asbestos, this will significantly reduce your renovation or demolition cost. So if you’re wondering how asbestos testing can be done, simply continue reading.

Identifying asbestos is as simple as just looking at the material with the naked to check if it contains the harmful substance. The presence or otherwise of a potential asbestos containing material can only be confirmed by laboratory testing. A qualitative identification of asbestos in a bulk sample is the best method for testing for asbestos. This asbestos testing process involves taking a look at the fibres under a polarized light microscope and under varying conditions to determine the kind of asbestos it is, if present. The result of the testing, if positive, will identify the type of the asbestos discovered and this can be either white or chyrsotile asbestos, brown or amosite asbestos or, blue or crocidolite asbestos. However in the event whereby the sample doesn’t contain any asbestos, the test result will show NAD or No Asbestos Detected.

Asbestos fibres are very small, so they’re not possible to identify with the naked eye. However, they’re common in particular materials of a certain age, so you can work out if there are any parts of a building that are likely to contain asbestos.

Start by checking the date that the material you suspect contains asbestos was installed. If it was in 2000 or after then you don’t need to worry, it definitely doesn’t contain asbestos. However, if it was fitted before 2000 it may contain asbestos, particularly if this was between 1940 and 1980.

Materials that used to commonly contain asbestos include ceiling tiles, guttering, soffits, fascia, external cladding and facades, vinyl flooring, artex, cement roofs and insulation.