Find an Asbestos Removal Contractor you can trust in Sheffield.

For some types of asbestos, you are not legally required to use a licensed contractor. However, it’s recommended that you always use one. These contractors will have all the relevant training and knowledge to make sure asbestos is removed safely. The Health and Safety Executive (HSE) is the licensing body.

The legal requirement to have an asbestos survey carried out applies to non-domestic properties. If you own or operate a non-domestic property such as an office, shop, or warehouse, an asbestos survey and management plan must be in place. For domestic properties, there is no legal requirement to have an asbestos survey.

In recent times, when about to purchase or renovate a building that was constructed before the 1980’s, most homeowners will be particular about knowing whether or not asbestos containing materials are present. Also when a property is being checked, a lot of individuals would want to know the peak years for asbestos to be used in homes.

Modern asbestos production started in the 1800s during the time of industrial revolution, but after some regulation were made to ban some asbestos products and uses in the late 1970’s, the production witnessed a significant drop. The United States was the foremost users of asbestos according to the USGS but this lasted until the 1960’s when it was overtaken by the Soviet Union. In this article, we’ll look at the years of use for asbestos containing materials like pipe insulation, vermiculite as well as wall systems.

✓ Insulation. Asbestos insulation was commonly used in homes with lots of focus on both piping and ductwork. This was started in the year 1908 but was ended between 1915 and 1920 by Air-Cell pipe insulation.

✓ Vermiculite. This refers to a mineral that’s popular for its insulating properties and mostly used as insulation for attics. It possesses a gold to brown kind of appearance and it’s also a pebble material that shimmers in the light. According to the EPA, if this material is suspected in a home it should be assumed to contain asbestos.

✓ Wall Systems. Plaster and drywall are very common wall types that are asbestos containing. And until asbestos was banned both wall systems are said to have asbestos. For example the drywall sheets as well as it’s joint compound both features asbestos from the 1930s to the 1980s.

If you find out there’s asbestos in your property, it’s not always necessary to remove it. Asbestos is relatively low-risk if it’s contained in a material. This means that, if the material it’s in is in good condition, it shouldn’t be a problem.

However, if a material containing asbestos is damaged, or you want to remove, sand or drill into it, it’s best to have it removed by a licensed professional.

Many examples of asbestos will not need removing, for example if it is present in artex that is in good condition. However, if you are carrying out building work on or near the asbestos it should be carefully removed before the building work starts to make sure it is not accidentally disturbed.

Asbestos is a perfect example of a silent and hidden killer. The harmful fibre it releases is not only totally invisible to the eye, but also absolutely odourless, therefore can’t be smelt. As a result, you can walk into a room completely filled with asbestos and you still won’t suspect a thing. If you live in an old building ( built before the 1980’s) in the UK, it’s very possible that there’s some asbestos in the house.

Asbestos causes up to 5000 deaths in the UK on a yearly basis. When asbestos materials are disturbed, they release asbestos fibres, which when inhaled can result in lung cancer, asbestosis as well as mesothelioma which are all painful and fatal diseases. And perhaps even more importantly, you won’t notice any symptoms of having these diseases until after several years after your first exposure to asbestos fibres.

Therefore, to reduce these numbers, there’s a crucial need to to know how to identify asbestos so as not to put both ourselves and loved ones at risk.

There are three types of asbestos which includes blue or crocidolite, brown or amosite, and white or chrysotile. So they can easily be identified by their respective colour names, right? Wrong! Asbestos fibres can not be seen with the eye, it can only be detected under a microscope. They’re very tiny and light, and once disturbed and in the air, they can float can days. Asbestos are commonly found in several building materials such as cement products, floor tiles, paints, adhesive, partitions, cladding, insulation, doors and lots more. With its wide acceptability in the past, any building product you can probably think of could contain asbestos.

If your house is built before the 1980’s it’s likely to contain some form of asbestos material which when disturbed can release some harmful fibres whose inhalation can lead to a number of fatal diseases and health issues like lung cancer and asbestosis. If you suspect that your house contains some asbestos materials, the best step to take is to call in a qualified asbestos consultant to carry out a thorough inspection of the area so as to identify the potential asbestos containing materials in your property.

The result of the testing done will bring a peace of mind as it’ll confirm whether or not the material actually contains asbestos. In the event whereby the testing result shows that the material does not contain asbestos, this will significantly reduce your renovation or demolition cost. So if you’re wondering how asbestos testing can be done, simply continue reading.

Identifying asbestos is as simple as just looking at the material with the naked to check if it contains the harmful substance. The presence or otherwise of a potential asbestos containing material can only be confirmed by laboratory testing. A qualitative identification of asbestos in a bulk sample is the best method for testing for asbestos. This asbestos testing process involves taking a look at the fibres under a polarized light microscope and under varying conditions to determine the kind of asbestos it is, if present. The result of the testing, if positive, will identify the type of the asbestos discovered and this can be either white or chyrsotile asbestos, brown or amosite asbestos or, blue or crocidolite asbestos. However in the event whereby the sample doesn’t contain any asbestos, the test result will show NAD or No Asbestos Detected.

The ability to identify exactly what an asbestos looks like can possibly save you from deadly health conditions that can arise as a result of a prolonged exposure to the dangerous material. It is one of the most frequent questions asked by homeowners in the UK and for a good reason. However, this question is not as simple or straightforward as it sounds because asbestos can actually take on a number of forms. As a result, this makes it a lot difficult to identify asbestos just by visual analysis or comparing an area which you suspect to be an asbestos to an example online. Therefore, the best way to truly identify if the area you suspect is really asbestos, then you’d have to send away a sample of the material to a certified asbestos testing lab in a safe way.

This happens to be the most effective way to verify if there’s a presence of asbestos in your home or property. Legally speaking, commercial properties are necessitated to undergo a total asbestos audit which involves carrying out lab tests on each and every material that’s suspected to include the deadly asbestos fibre substance. From these tests, you’ll get to know whether the asbestos present are friable or non friable which can go a long way to help identify the level of risk that’s posed by various building materials.

Upon the reception of the suspected asbestos-contained material, a certified asbestos testing laboratory will incorporate a form of transmission electron microscopy to reveal as well as determine the type of asbestos fibres that are in the sample. In the event whereby you discover a material you suspect to be an asbestos in your home, do not just go ahead to remove it. It’s strongly recommended to call in a specialist who can help to safely remove and send the suspected material to the lab for verification before further actions would be taken.