Find a Conservatory Installer you can trust in Cumnock.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

Whilst uPVC is the UK’s favourite because it’s cheap to manufacture and has a number of qualities, there are also options available including aluminium and hardwood. Both are popular for various reasons.Aluminium, as a metal, is the strongest and most durable material available for conservatories. On top of this it won’t rust, warp or crack. Hardwood offers a more traditional appeal and whilst it requires high maintenance levels, is perfect for conservation areas and listed buildings.

How Much To Change Roof On Conservatory?

If your existing conservatory roof is looking a bit tired and worn out, it may just be time you stopped the frequent repairs and maintenance, and start to think about getting a replacement. However, before you change the roof on your conservatory, there’s always a need to find out the cost to complete the project before you proceed so as to help you set a budget and start to plan. In this article, we’re going to give you a rough estimate of the cost of a changing a conservatory roof. Let’s take a look!

Generally, the prices of conservatory roofs varies largely on the a number of factors which includes the material used as well as the size of the conservatory.

✓ Polycarbonate conservatory roof - if you’re looking for the most affordable conservatory roof material option, then this is your material. Polycarbonate is very easy to work on and needs just a little framing skill which makes labour quite cheap. Furthermore, each panels are also relatively inexpensive when compared to glass panel or tile area. The price of this material will normally range between £200 to £300 per square metre for installation.

✓ Glass conservatory roof. This material is very energy efficient and will also add great value to your home. The price of this conservatory roof material will usually range between £300 to £360 per square metre for installation.

✓ Solid conservatory roof. This conservatory roof material possesses the best insulation properties alongside the longest lifespan. The solid tile roof the most secure which also offers the most privacy alongside many other benefits. These benefits, however, can only imply a higher cost. For a solid conservatory roof, the price per metre square normally varies between £445 to £650.

Lean-to conservatories are often known as Mediterranean conservatories or sunrooms and are a great way to add more living space when you’ve only got a small amount of room to work with. They usually have clean lines, a rectangular shape and attach to the side or rear of your home, which makes them one of the easiest conservatory types to build yourself.

So how do you build a wooden lean-to conservatory? The first step is to decide what you want it to look like. Most lean-to conservatories are constructed of glass and the wood frame, but you can choose to have dwarf walls too. Dwarf walls are low brick walls that are useful if you’re planning to plumb in radiators, have air conditioning installed or put plug sockets in the conservatory.

When you’ve decided what your wooden lean-to conservatory is going to look like, you’ll need to get the materials. You’ll need to choose a hardy wood – oak is the most expensive but also the most durable – and source glass for the windows. You’ll also need to decide on a roof material and work out the correct pitch.

The first step to building your wooden lean-to conservatory is to dig the foundations. You’ll then need to level the earth, then add concrete to the correct height, which should be lower than your property’s existing damp course. Then, you’ll build up to the damp course, which will be your conservatory’s floor level. Don’t forget to make sure it’s even.

If you’re building a dwarf wall, start it from the base and build up to no more than 1 metre high. Once the cement is dry, place external sills on top of the dwarf wall. You’ll then need to secure the frames; start with the one that secures to your property, then do the same for the rest, connecting outwards until they meet from the two sides. Then put up your doors.

Now it’s time to build the roof. This should be simple if you’ve bought your own custom-made kit. Place the roof ridge on top of the frames, then add the roof rafters between the roof ridge and hip bars. Fit your glazing sheets and guttering – it’s important that your wooden conservatory roof has guttering just like your house, otherwise your conservatory roof won’t last very long and could even cause rainwater to rot your wooden frames.

Once you’ve built your wooden lean-to conservatory, all that’s left is to decide on how you want to decorate it. But if this all sounds like too much, get in touch with specialist wooden conservatory installers who will be able to give you a quote for building you a lean-to conservatory.

If you are considering building a wooden conservatory in your home, it’s normal to be curious about whether or not the home improvement effort is costly. Basically, wooden conservatories are ones that have been constructed using a wooden structure. There are options to choose from which timber and this can also play a part in the amount you’ll have to pay. Conservatories using hardwood, which are more durable and requires less preparation, are also considerably costlier than the softwood counterpart.

For just the timber in a kit build your own conservatory you would be looking at around £10,000 to £20,000. Generally, a wooden conservatory built for you will cost you a range between £20,000 to £50,000 based on the type of wood, the size as well as the style you opt for.

In addition, wooden conservatory prices are also determined by the supplier you’re dealing with. As a result, it’s advisable to conduct a proper and detailed market research about the available suppliers and identify the one who truly offers quality materials at an affordable rate. If you wish to go for an Oak frame, the price will typically be higher.

To give your house a more traditional look, you can go for a timber conservatory rather than a uPVC one. However, it requires more maintenance than the uPVC as well as regular weatherproofing to prevent it from warping or rotting as a result of changes in humidity or temperature. If you want the timber look there are options with modern uPVC which can give a similar style but at a lower cost.

A good way to get rid of your conservatory is to sell it. Depending on its condition you may not make much money from it, but it’s an easy and financially viable way to get your old conservatory dismantled and out of the way. If you are replacing it, the installer can easily remove this for you completely.

How To Tile Conservatory Roof

If you’re thinking about replacing your old conservatory roof with a tiled one, you’d probably want to know how you can go about it. Tiling of a conservatory roof comes with a plethora of benefits with the most significant one being a much improved insulation which helps you save money on heating bills. This activity is also, however, a task that is best done by a professional. It requires working at height which can be very dangerous and also demands a particular set of skills as well as confidence to make the project a safe and successful one. In other words, if you lack any of the aforementioned attributes, then we’d strongly recommend that you call in a reliable professional who can guarantee the best results for help. In this article, we’ll walk you through the conservatory roof tiling process.

✓ Remove the existing roof. As you would have guessed, the first step is to remove the old existing roof and dispose off in an environmental friendly way.

✓ Glass Reinforced Plastic (GRP) rafters are fitted so as to develop the structural frame for the new solid roof.

✓ Waterproofing. The next step is to add 100% waterproof sheets under the GRP rafters.

✓ Insulation. Once the waterproof sheets have been installed, it’s then time to fit the insulation boards making sure that there’s a 15mm gap between the boards and the waterproof sheets.

✓ Outer sheets. To minimize the number of roofing bars and increase the conservatory’s efficiency, you’ll have to include the outer sheets at this stage.

✓ Tiling. This is the final step in the process. Add the tiles to the conservatory roof and make sure that they’re firmly secured. This wouldn’t take forever as most conservatories are not that big in size.