Find a Conservatory Installer you can trust in Maidenhead.

If you’ve ever looked into different types of conservatories, you’ll see that wooden conservatories are not the cheapest. However, that’s not a reason to dismiss them as an option for your home.

Wooden conservatories can cost anywhere between £15,000 to £60,000. While this may seem expensive, they are often a much classier option for your home and are ideal for period homes and those in a conservation area where uPVC might not be permitted.

If you choose a hardwood conservatory, you could see your conservatory last over 15 years. Most uPVC conservatories will only last around this time, and as they get old they can look shabby; it’s common for the frames to discolour in the sun. With good maintenance, wooden conservatories can look fabulous for years. Wood naturally retains heat too, so ensure that you use low-e internal glass which reflects heat back into the room and you’ll have as warm a conservatory as any.

When you weigh up all of the pros and cons of uPVC conservatories compared with wooden ones, you might come to the conclusion that wooden conservatories aren’t that expensive when it boils down to it. Although the initial cost is higher, you’ll get a better-looking conservatory that works with both modern and period properties and will look elegant and tasteful for years to come.

What Is The Difference Between A Conservatory And An Orangery?

If you’re looking to build an extension for your home, one of the first things that comes to mind is the type of structure that would best suit your property. When it comes to glass extensions there are two major varieties which includes the traditional conservatory and the orangery, but there are usually a lot of confusion over the differences of these two varieties. With the growth in popularity of glazed extensions, the differences between the two structures are becoming more and more thin. However, the main difference between a conservatory and an orangery is the number of glass incorporated. Conservatories are fully glazed structures featuring a low brick base wall, meanwhile orangeries are grand brick structures with with glazed roofs. But as a result of innovations of over the years in glazing, the difference has changed a bit.

Here are some of the major differences between a conservatory and an orangery.

✓ Orangeries are generally best suited to traditional-styled homes or with older property making use of matching stone or brick in construction. Meanwhile for a more recent or modern property, a conservatory will be the better option to add the flair to your property.

✓ Conservatories tend to be larger than orangeries, therefore if you want a smaller extension, an orangery would be your best bet.

✓ Orangeries are typically rectangular in shape and is traditionally a more regular building meanwhile a conservatory can be shaped to suit your needs. With an conservatory, you can get a T-shaped, L-shaped, curved, double ended and lean-to extensions to suit your preference.

✓ An orangery usually possess a flat roof at the edges with a glazed lantern section right at the centre. You can also find more luxurious orangeries having two or more lantern sections. However, when it comes to the roofing, conservatories generally have more options. Some are gabled or pitched, others are lean-to with a plethora of choice to finish off the roof.

uPVC is unplasticised polyvinyl chloride. It is a favourite amongst homeowners and manufacturers for its cheap production cost and excellent benefits. uPVC is used for window frames, conservatories and doors. In fact, uPVC can be three times cheaper than wooden frames and is also the most energy efficient option.As well as this, uPVC is now available in a range of colours other than the typically seen bright white finish. It can also be recycled, is durable and resistant to changing weather conditions.

Lean-to conservatories are often known as Mediterranean conservatories or sunrooms and are a great way to add more living space when you’ve only got a small amount of room to work with. They usually have clean lines, a rectangular shape and attach to the side or rear of your home, which makes them one of the easiest conservatory types to build yourself.

So how do you build a wooden lean-to conservatory? The first step is to decide what you want it to look like. Most lean-to conservatories are constructed of glass and the wood frame, but you can choose to have dwarf walls too. Dwarf walls are low brick walls that are useful if you’re planning to plumb in radiators, have air conditioning installed or put plug sockets in the conservatory.

When you’ve decided what your wooden lean-to conservatory is going to look like, you’ll need to get the materials. You’ll need to choose a hardy wood – oak is the most expensive but also the most durable – and source glass for the windows. You’ll also need to decide on a roof material and work out the correct pitch.

The first step to building your wooden lean-to conservatory is to dig the foundations. You’ll then need to level the earth, then add concrete to the correct height, which should be lower than your property’s existing damp course. Then, you’ll build up to the damp course, which will be your conservatory’s floor level. Don’t forget to make sure it’s even.

If you’re building a dwarf wall, start it from the base and build up to no more than 1 metre high. Once the cement is dry, place external sills on top of the dwarf wall. You’ll then need to secure the frames; start with the one that secures to your property, then do the same for the rest, connecting outwards until they meet from the two sides. Then put up your doors.

Now it’s time to build the roof. This should be simple if you’ve bought your own custom-made kit. Place the roof ridge on top of the frames, then add the roof rafters between the roof ridge and hip bars. Fit your glazing sheets and guttering – it’s important that your wooden conservatory roof has guttering just like your house, otherwise your conservatory roof won’t last very long and could even cause rainwater to rot your wooden frames.

Once you’ve built your wooden lean-to conservatory, all that’s left is to decide on how you want to decorate it. But if this all sounds like too much, get in touch with specialist wooden conservatory installers who will be able to give you a quote for building you a lean-to conservatory.

Generally, if you want to do a job, you can as well ensure that’s done properly. You may be considering building a small base for an orangery, but no matter how small it is, it just shouldn’t be done to any other than a compliant standard, and that’s whether or not an approval is needed. When it comes to building work which is covered by Building Regulations, you are required to comply (by the law) with the regulations and to make use of one of the two types of Building Control Service available. These includes the Building Control Service given by your local authority or the Building Control Service given by approved inspectors.

Regardless of the service you opt for, you’re going to pay but the preferred service may offer an advice before commencement of the project. The individual carrying out the building work is charged with the responsibility of ensuring total compliance with the regulations. Therefore, if you select to undertake the project by yourself, the responsibility is primarily on you. In the same vein, if you opt for a building company the responsibility would be the company’s, but you should always ensure to confirm this position before commencement of the project. You must also take note that you may be served with an enforcement notice if you fail to comply with the regulations as the owner of the building. So it’s advisable that you choose your builder very carefully.

There are a bunch of elements you may require approval for like the structural integrity, appropriate insulation levels, or the construction of a building over drainage or sewage. In cases where it’s obvious that you’d need building regulations, you can simply submit the building and planning application together at once.

When it comes to extending your home or creating more living space, you can either construct an extension, transform a current space or add a conservatory. While all the three available options to create more living space in your home are worth giving a shot, the wooden conservatory happens to be the easiest and cheapest of them all. If you are thinking about building wooden conservatory of your own, then you’d probably want to know exactly how much its going to cost. The simple answer is that it depends on multiple factors such as the type of wood required, the size, style as well as the quality of materials to be incorporated in your final conservatory design.

The most significant determinant, however, is the type of wood required. Below is a breakdown of the prices based on this factor:

• Hardwood Conservatory

Hardwood such as elm and beech are one of best options for building conservatories due to their complex structure which helps increase the durability and stability of conservatories. The price of an average hardwood conservatory without fitting usually ranges £10,000 to £15,000.

• Oak Conservatory

Due to its popularity and high availability, oak is a very common wood type used in the construction of conservatories. And as a result, it can be gotten within a range of £9,000 to £10,000 for just the wood. Oak can also be made to be resistant to bugs and pests. The price of this type of oak wooden conservatory jumps to around £15,000 to £20,000.

• Timber Conservatory

This refers to various types of wood that’s readily available before being subjected to treatment in different plants or factories. Due to its rather rough exterior and lack of a clean finish, this type of wood is usually gotten at a giveaway price. Depending on the type of wood, the price to buy just a timber conservatory kit can vary between £10,000 to £20,000.

Click here to learn more about wooden conservatories

You might think that all wooden conservatories are the same. But there are actually lots of differences between them, and some conservatories are better than others. One of the most important factors to consider when you’re looking for a wooden conservatory is the type of wood that it’s made from. Generally, there are two different types to look out for: softwood and hardwood. So what wood should be used for a wooden conservatory?

Softwood conservatories are usually made from European redwood or Siberian larch. These types of conservatories are the cheapest wooden conservatories you can buy because the wood grows much faster than hardwoods. However, due to their soft nature, they may only last 7-15 years, reducing their cost-effectivity.

The best wood to use for a wooden conservatory is a hardwood. The most expensive type is oak, but you get what you pay for – it looks fabulous and it can also be coated with a bug and pest-resistant solution to increase its longevity. If you haven’t got the budget for oak, other hardwood options include Brazilian cedar, idigbo and luan, which are still great choices. Make sure you speak to your conservatory installer about the ‘closeness’ of the wood grains, as close-grained hardwoods are said to be the most suitable for conservatories. You should also check that your supplier has strict control of the quality of the wood so can ensure that it’s been well seasoned and prepared for use in construction.

First and foremost, a conservatory or a sunroom is a structure attached to the sunny part of a house which possess glass walls and roof which enables the sun’s entrance into the space. Conservatories happen to be a very popular structure in the UK as home and property owners are able to subject it to wide variety of uses such for relaxation, entertainment, hangouts with family and friends, reading and lots more. Therefore, when the conservatory roof is leaking a lot of activities could be affected. Hence, the more reason why you should know hoe to repair this kind of issue by yourself. However, if you’re not confident enough to carry out this task, we’ll recommend you call in a professional who can guarantee the best output the first time. In this guide, we’re going to look at the conservatory roof leak repair process.

• Spot the leak. The first line of action is to examine the conservatory’s roof to identify the leaking part (tip - most leaks takes place around transparent roof panes edges). If you have a slanted roof, you’d have to look carefully. The spot where it drips may not necessary imply that its the leaking spot.
• Remove the old seal. Climb a ladder to access the leaking pane. Then, with the help of a utility knife, lift out the panel and clean all traces of the old sealant. Once done, simply lay down a bead of the new sealant in the frame, press the clear panel back in place and apply sealant to the outer edges.
• Cracked pane. If the existing pane is cracked or broken, simply hold the pieces tightly together by applying tape across the pane in various directions
• Leak sealing. Another option to fix leaks is by applying a sealant around the leaking pane without having to remove it.