Find a Conservatory Installer you can trust in Flint.

Do You Need Planning Permission For A Conservatory?

Adding a conservatory to your home or property comes with a whole lot of benefits. It provides you with the much needed additional living space within your property, add value to your home and creates a link between your home and garden. As advantageous as it is, one of the major reasons why some homeowners decide against constructing a new conservatory is because of planning permission. If you don’t know what you’re doing the entire process can be very tedious and you definitely do not want to go through the stress of completing your remarkable new conservatory, only to be instructed to have it removed again.

Therefore, as a homeowner, you have the responsibility to seek planning permission before you undergo such construction project and that’s more than enough to make some people reconsider the whole project. In this article, we’ll let you know whether you’ll need to apply for a planning permission.

Generally, conservatories falls into the category of permitted development rights which allows you to complete home building projects without having to apply for a planning permission. However, there are some circumstances where you’ll require a planning permission. These includes:

✓ If the conservatory covers more than 50 percent of the land around the main house.

✓ If the conservatory will be placed on the side of the house that faces the road.

✓ If the conservatory will be higher than the highest point of the main building’s roof.

✓ If the main building is lower than the height of the eaves and ridge.

✓ If the conservatory will be constructed to the side of the house and more than a single storey or it goes higher than 4 metres.

✓ If the conservatory will be wider than the width of the main building, if it’s to be built beside it.

✓ If the conservatory will be constructed at the rear and higher than 4 metres.

The short and simple answer to this question is yes, just like other new extensions, you must have a foundation done for your lean to conservatory. In order to transfer the building’s weight to the floor safely, there’s a need to construct a foundation. Without it, the structural integrity of the extension would be heavily compromised. What’s more? While there’s no minimum depth requirement for a lean to conservatory, there are multiple factors that can affect the depth as well as type of the foundation. Let’s take a look!

• The nearby trees. What trees do is to absorb water from the soil which can affect the foundation significantly. When water is absorbed from the soil, the soil shrinks which affects the foundation’s strength. The size as well as type of the tree will determine the extent of the water absorption from the ground.
• The soil’s suitability. The weight that each soil can withstand varies and even more so, when environmental factors have more effect on certain types of soils than others. For instance, chalk is able to drain water away relatively easily which means that nearby trees will only have a little effect on its quality. Clay, on the other hand, shrinks when drying and also retains a lot of water. This means that nearby trees will have huge impact on clay soil which will compromise the structural integrity of the lean to conservatory. Therefore, since changes to clay mostly occur to about 0.75m depth, foundations on the soil should be constructed deeper to compensate.
• Undisturbed ground. Before the foundations are laid, there’s a need to identify grounds that hasn’t been built on and this usually takes a depth of about 1m (this figure may vary especially in regions where drains have been laid).

Aluminium conservatories are really easy to maintain, making them a top choice for many homeowners. Unlike wooden conservatories, they don’t need regular treatment to ensure they don’t deteriorate.

The most you’ll need to do to keep your aluminium conservatory looking great is give the frames and glass an odd wipe with water and a mild detergent to get rid of any occasional dirt.

The roof is the place that your conservatory is most likely to get grubby, but cleaning it is easy. You shouldn’t need to use any powerful cleaners – just warm water and a mild detergent.

The best tool to use to access your conservatory roof is a telescopic brush. This will help you get into corners and high areas without needing to work from height. You can use a ladder to help you clean your conservatory roof, but you should be very careful to avoid leaning it against any glazing

.

Consider investing in a telescopic cleaner with squeegee, brush and mop attachments to help you achieve a great finish on your aluminium conservatory.

When people talk about finishes on a wooden conservatory, there are a few different things that they may be referring to. Some may be referring to the colour and type of wood used to build the conservatory, but they may also be talking about the type of treatment used to protect the wood from the weather. We’ll cover both bases for what finish is best on a wooden conservatory here.

When you’re thinking about the best wood type and finish for the conservatory, it’s best to go with a hardwood. There are both hardwoods and softwoods, and hardwoods are the most durable. Oak is the most expensive choice but is also the most durable, so lots of people decide to go for this option. Other good choices that are slightly cheaper are Brazilian cedar and idigbo. Softwoods like European redwood or Siberian larch are cheaper still, but they won’t last as long, so it may work out more cost-effective to spend more on a hardwood.

Wood is a natural material, so it’s important to look after your wooden conservatory to prevent it from rotting or getting attacked by bugs and pests. Your conservatory will be exposed to all weathers, so you’ll need to use a good finish to ensure that it stays in tip-top condition for years to come. Your installer should be able to tell you what’s best, but some of the best finishes for a wooden conservatory include breathable varnishes and decking oil. However, if you do use an oil, it’s best to use a preservative treatment too; oil will only repel water. Joints are particularly susceptible to water penetration, so make sure you use a good wood treatment and focus on areas where water would pool during rain. Then you can apply a decking oil afterwards.

You might think that all wooden conservatories are the same. But there are actually lots of differences between them, and some conservatories are better than others. One of the most important factors to consider when you’re looking for a wooden conservatory is the type of wood that it’s made from. Generally, there are two different types to look out for: softwood and hardwood. So what wood should be used for a wooden conservatory?

Softwood conservatories are usually made from European redwood or Siberian larch. These types of conservatories are the cheapest wooden conservatories you can buy because the wood grows much faster than hardwoods. However, due to their soft nature, they may only last 7-15 years, reducing their cost-effectivity.

The best wood to use for a wooden conservatory is a hardwood. The most expensive type is oak, but you get what you pay for – it looks fabulous and it can also be coated with a bug and pest-resistant solution to increase its longevity. If you haven’t got the budget for oak, other hardwood options include Brazilian cedar, idigbo and luan, which are still great choices. Make sure you speak to your conservatory installer about the ‘closeness’ of the wood grains, as close-grained hardwoods are said to be the most suitable for conservatories. You should also check that your supplier has strict control of the quality of the wood so can ensure that it’s been well seasoned and prepared for use in construction.

How To Tile Conservatory Roof

If you’re thinking about replacing your old conservatory roof with a tiled one, you’d probably want to know how you can go about it. Tiling of a conservatory roof comes with a plethora of benefits with the most significant one being a much improved insulation which helps you save money on heating bills. This activity is also, however, a task that is best done by a professional. It requires working at height which can be very dangerous and also demands a particular set of skills as well as confidence to make the project a safe and successful one. In other words, if you lack any of the aforementioned attributes, then we’d strongly recommend that you call in a reliable professional who can guarantee the best results for help. In this article, we’ll walk you through the conservatory roof tiling process.

✓ Remove the existing roof. As you would have guessed, the first step is to remove the old existing roof and dispose off in an environmental friendly way.

✓ Glass Reinforced Plastic (GRP) rafters are fitted so as to develop the structural frame for the new solid roof.

✓ Waterproofing. The next step is to add 100% waterproof sheets under the GRP rafters.

✓ Insulation. Once the waterproof sheets have been installed, it’s then time to fit the insulation boards making sure that there’s a 15mm gap between the boards and the waterproof sheets.

✓ Outer sheets. To minimize the number of roofing bars and increase the conservatory’s efficiency, you’ll have to include the outer sheets at this stage.

✓ Tiling. This is the final step in the process. Add the tiles to the conservatory roof and make sure that they’re firmly secured. This wouldn’t take forever as most conservatories are not that big in size.

First and foremost, a conservatory or a sunroom is a structure attached to the sunny part of a house which possess glass walls and roof which enables the sun’s entrance into the space. Conservatories happen to be a very popular structure in the UK as home and property owners are able to subject it to wide variety of uses such for relaxation, entertainment, hangouts with family and friends, reading and lots more. Therefore, when the conservatory roof is leaking a lot of activities could be affected. Hence, the more reason why you should know hoe to repair this kind of issue by yourself. However, if you’re not confident enough to carry out this task, we’ll recommend you call in a professional who can guarantee the best output the first time. In this guide, we’re going to look at the conservatory roof leak repair process.

• Spot the leak. The first line of action is to examine the conservatory’s roof to identify the leaking part (tip - most leaks takes place around transparent roof panes edges). If you have a slanted roof, you’d have to look carefully. The spot where it drips may not necessary imply that its the leaking spot.
• Remove the old seal. Climb a ladder to access the leaking pane. Then, with the help of a utility knife, lift out the panel and clean all traces of the old sealant. Once done, simply lay down a bead of the new sealant in the frame, press the clear panel back in place and apply sealant to the outer edges.
• Cracked pane. If the existing pane is cracked or broken, simply hold the pieces tightly together by applying tape across the pane in various directions
• Leak sealing. Another option to fix leaks is by applying a sealant around the leaking pane without having to remove it.