Find a Conservatory Installer you can trust in Caledon.

No matter how small or little your lean to conservatory is, the benefits that can be derived from it remains immense. Not only does it add to the value of your home by making it more attractive to potential buyers and securing you a long term investment, but it can also serve as a relaxation or hang out spot with family and friends. In fact, with the lean to conservatory’s simplistic design, it happens to be an economical way to extend your home and also to maximize your living space. If you’re considering to build a small lean to conservatory on your property, then you’d probably want to know exactly how much this is going to cost. In this post, we’re going to look at the price involved in constructing a small lean to conservatory.

When it comes to building a lean to conservatory, there are a bunch of factors that’ll play a key role in the final cost of the project. For example, you’d have to make a decision on the glazing options, roof type, size and more. All these factors will have a huge impact on the final cost you’re going to incur to complete the project. For instance, a polycarbonate roof material lean to conservatory with a size of 3500mm x 2000mm will cost within a range of £7000 to about £8000, while a glass roof material lean to conservatory of the same size will cost within the range of £7500 to about £8500. In order to get a more accurate cost estimate for your small lean to conservatory project, there’s the need to call in a professional to discuss your specific requirements as well as budget.

If you’ve ever looked into different types of conservatories, you’ll see that wooden conservatories are not the cheapest. However, that’s not a reason to dismiss them as an option for your home.

Wooden conservatories can cost anywhere between £15,000 to £60,000. While this may seem expensive, they are often a much classier option for your home and are ideal for period homes and those in a conservation area where uPVC might not be permitted.

If you choose a hardwood conservatory, you could see your conservatory last over 15 years. Most uPVC conservatories will only last around this time, and as they get old they can look shabby; it’s common for the frames to discolour in the sun. With good maintenance, wooden conservatories can look fabulous for years. Wood naturally retains heat too, so ensure that you use low-e internal glass which reflects heat back into the room and you’ll have as warm a conservatory as any.

When you weigh up all of the pros and cons of uPVC conservatories compared with wooden ones, you might come to the conclusion that wooden conservatories aren’t that expensive when it boils down to it. Although the initial cost is higher, you’ll get a better-looking conservatory that works with both modern and period properties and will look elegant and tasteful for years to come.

Are Glass UPVC Conservatories Cold?

An extension is always a great addition to any home or property and while it’s a handy space, it also helps to enhance the visibility of the garden. If you plan to extend, the choice is yours as you can develop a customized design to give you the much desired appearance as well as function. However, in order to give more natural light to a single storey extension and for a more modern look, so many homeowner’s wonder the viability of glass roof. The short and quick answer to this question is yes, but will this lead to a trade off when it comes to heat loss?

If you’ve had the chance of making use of a poorly designed conservatory, you’d be in a better position to explain how weather affects the living space. Due to fact that glass is being used, heat becomes very difficult to retain as it easily leaves the conservatory. However in the summer, this quality can actually be helpful as conservatories without the right glass or the appropriate vents can heat up in just an hour or even less. Overall, all these are extremes a glass roof extension wouldn’t suffer but there are still a few things to be learned.

First and foremost, glass needs to insulate the space, it’ll never perform as good as a flat roof when you make use of a cheap glass. Then secondly, the installation of the glass roof extension has to be designed and carried out for your unique home or property by a specialist due to the fact that both size and direction would have to be put into consideration. This way, your UPVC conservatory wouldn’t have to so cold and unusable especially during the winter months.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

Aluminium conservatories are really easy to maintain, making them a top choice for many homeowners. Unlike wooden conservatories, they don’t need regular treatment to ensure they don’t deteriorate.

The most you’ll need to do to keep your aluminium conservatory looking great is give the frames and glass an odd wipe with water and a mild detergent to get rid of any occasional dirt.

uPVC is unplasticised polyvinyl chloride. It is a favourite amongst homeowners and manufacturers for its cheap production cost and excellent benefits. uPVC is used for window frames, conservatories and doors. In fact, uPVC can be three times cheaper than wooden frames and is also the most energy efficient option.As well as this, uPVC is now available in a range of colours other than the typically seen bright white finish. It can also be recycled, is durable and resistant to changing weather conditions.

How To Tile Conservatory Roof

If you’re thinking about replacing your old conservatory roof with a tiled one, you’d probably want to know how you can go about it. Tiling of a conservatory roof comes with a plethora of benefits with the most significant one being a much improved insulation which helps you save money on heating bills. This activity is also, however, a task that is best done by a professional. It requires working at height which can be very dangerous and also demands a particular set of skills as well as confidence to make the project a safe and successful one. In other words, if you lack any of the aforementioned attributes, then we’d strongly recommend that you call in a reliable professional who can guarantee the best results for help. In this article, we’ll walk you through the conservatory roof tiling process.

✓ Remove the existing roof. As you would have guessed, the first step is to remove the old existing roof and dispose off in an environmental friendly way.

✓ Glass Reinforced Plastic (GRP) rafters are fitted so as to develop the structural frame for the new solid roof.

✓ Waterproofing. The next step is to add 100% waterproof sheets under the GRP rafters.

✓ Insulation. Once the waterproof sheets have been installed, it’s then time to fit the insulation boards making sure that there’s a 15mm gap between the boards and the waterproof sheets.

✓ Outer sheets. To minimize the number of roofing bars and increase the conservatory’s efficiency, you’ll have to include the outer sheets at this stage.

✓ Tiling. This is the final step in the process. Add the tiles to the conservatory roof and make sure that they’re firmly secured. This wouldn’t take forever as most conservatories are not that big in size.

Many conservatories fall under permitted development which means they don’t require planning permission. There are exceptions to this though, especially if you’re looking to have a large conservatory installed. Read our guide on conservatory planning permission for more information.