Find a Conservatory Installer you can trust in Umberleigh.

Do I Need Planning Permission For A Wooden Conservatory?

The addition of a conservatory to your home is classified as a “permitted development and according to the 2008 legislation, you do not need to apply for a planning permission to add a wooden conservatory to your home so far you are within some particular limits. These regulations are summarized below:

• All extensions must not be more than one storey and the height must be lower or equal to the existing building’s roof or 4m at the maximum.

• There are multiple limitations on the extent you can extend from your existing property depending on a few factors such as the type of your house as well as the location of the extension, be it at the rear or side of the building.

• If your wooden conservatory is to be constructed at the rear, it must not go beyond 3 metres from the attached house’s original property and 4 metres in a detached house. Also, the wooden conservatory mustn’t go beyond half the space around the property.

• The wooden conservatory must not go beyond half the size of the original house. Similar conditions govern that of the space around the existing building.

• Extensions that are not covered by the permitting rights are the ones constructed in front of the property or those directly facing the main street or road.

• Listed Building content may be needed in the event whereby there’s a Listed Building proposed work.

This is just a brief of the conditions that applies, however, the fact remains most property owners can have a wooden conservatory installed without having to apply for planning permission. It is advisable to consult your local planning office before you construct an extension. In certain cases, all work may require planning permission if there’s a permitted development rights removal. Click here to learn more about wooden conservatories

Does It Take Long To Put A Solid Roof On A Conservatory?

If you’re interested in installing a solid roof on your conservatory, it may also interest you to know just how long the project is going to take. Well, the fitting of a solid conservatory roof is quite easy and quick with minimal disruption and mess around when done by a reliable professional. The process, however, involves removing the old existing roof of the conservatory rather than fitting the new roof over the old one which can lead to many complications. Generally, the entire process should take about 6 working days to complete. In this article, we’re going to provide a breakdown of each task as well as the duration to complete the individual tasks to give you an idea of the entire solid roof replacement process. Let’s take a look!

✓ Day 1 - Setting up of the site. This includes sealing off your conservatory from the rest of the house as well as laying of the floor protection. Furthermore, your existing conservatory roof will be removed and positioned in such a way to enable easy transportation and disposal. By the end of the first day, the installation of the new roof will completed and made to be water tight

✓ Day 2 - Insulation will be installed on the inside of your new solid roof.

✓ Day 3 - The replacement conservatory roof will be tiled and the insulated plasterboard will be installed inside.

✓ Day 4 - This involves finishing of the conservatory roof’s inside and outside. And all rubbish would be adequately disposed off.

✓ Day 5 - Your tiled conservatory roof’s new ceiling will be plastered.

✓ Day 6 - This day is free as the plaster is left to dry off properly.

No matter how small or little your lean to conservatory is, the benefits that can be derived from it remains immense. Not only does it add to the value of your home by making it more attractive to potential buyers and securing you a long term investment, but it can also serve as a relaxation or hang out spot with family and friends. In fact, with the lean to conservatory’s simplistic design, it happens to be an economical way to extend your home and also to maximize your living space. If you’re considering to build a small lean to conservatory on your property, then you’d probably want to know exactly how much this is going to cost. In this post, we’re going to look at the price involved in constructing a small lean to conservatory.

When it comes to building a lean to conservatory, there are a bunch of factors that’ll play a key role in the final cost of the project. For example, you’d have to make a decision on the glazing options, roof type, size and more. All these factors will have a huge impact on the final cost you’re going to incur to complete the project. For instance, a polycarbonate roof material lean to conservatory with a size of 3500mm x 2000mm will cost within a range of £7000 to about £8000, while a glass roof material lean to conservatory of the same size will cost within the range of £7500 to about £8500. In order to get a more accurate cost estimate for your small lean to conservatory project, there’s the need to call in a professional to discuss your specific requirements as well as budget.

Lean-to conservatories are often known as Mediterranean conservatories or sunrooms and are a great way to add more living space when you’ve only got a small amount of room to work with. They usually have clean lines, a rectangular shape and attach to the side or rear of your home, which makes them one of the easiest conservatory types to build yourself.

So how do you build a wooden lean-to conservatory? The first step is to decide what you want it to look like. Most lean-to conservatories are constructed of glass and the wood frame, but you can choose to have dwarf walls too. Dwarf walls are low brick walls that are useful if you’re planning to plumb in radiators, have air conditioning installed or put plug sockets in the conservatory.

When you’ve decided what your wooden lean-to conservatory is going to look like, you’ll need to get the materials. You’ll need to choose a hardy wood – oak is the most expensive but also the most durable – and source glass for the windows. You’ll also need to decide on a roof material and work out the correct pitch.

The first step to building your wooden lean-to conservatory is to dig the foundations. You’ll then need to level the earth, then add concrete to the correct height, which should be lower than your property’s existing damp course. Then, you’ll build up to the damp course, which will be your conservatory’s floor level. Don’t forget to make sure it’s even.

If you’re building a dwarf wall, start it from the base and build up to no more than 1 metre high. Once the cement is dry, place external sills on top of the dwarf wall. You’ll then need to secure the frames; start with the one that secures to your property, then do the same for the rest, connecting outwards until they meet from the two sides. Then put up your doors.

Now it’s time to build the roof. This should be simple if you’ve bought your own custom-made kit. Place the roof ridge on top of the frames, then add the roof rafters between the roof ridge and hip bars. Fit your glazing sheets and guttering – it’s important that your wooden conservatory roof has guttering just like your house, otherwise your conservatory roof won’t last very long and could even cause rainwater to rot your wooden frames.

Once you’ve built your wooden lean-to conservatory, all that’s left is to decide on how you want to decorate it. But if this all sounds like too much, get in touch with specialist wooden conservatory installers who will be able to give you a quote for building you a lean-to conservatory.

Conservatories and orangeries look very similar, so it can be hard to tell what their differences are. The main thing that distinguishes the two is the amount of glazing they have.

Conservatories usually have a roof that is made up of at least 75% glass. Orangeries, on the other hand, have roofs that are generally less than 75% glass.

Conservatories also tend to have walls that are made up of at least 50% glass. However, orangeries have glass on less than 50% of the wall area.

Orangeries were originally developed to grow oranges in large stately homes. Their mixture of brick and glazing gave the oranges a combination of plenty of sunlight and shelter.

Do You Need A Building Reg For A Conservatory?

If you’re planning to build a conservatory in your home, it’s only logical to consider whether or not you require a building reg for such a structure. Generally, several conservatories, summer buildings, sheds as well as outbuildings do not require building regulation approval to erect. One of the applicable rules is the fact that if they’re ( small or less than 30m2) or constructed with non combustible material, or are differentiated from structures nearby or land and don’t feature sleeping accommodation or room, then they’re not required to submit a building regulations approval application. However, it’s strongly recommended to check with your local authority before you commence the project as only they can provide the most accurate information.

Generally, conservatories should be primarily built of translucent walls and roofs, while also possessing an external type door separating them from the main building within a property. What’s more? The foundations and floors, however, can be laid in a number of ways, but you’ll have to put into consideration the conditions of the ground, trees as well as the existing drains. It’s also a wise decision to include insulation which makes the structure a lot easier to heat especially during the cold months.

Overall, conservatories are usually exempt from building regulations if the following conditions are met:

✓ If the conservatory is erected at ground level and are not up to 30 square metres in floor area.

✓ If the structure is separated from the rest of the house with an external quality walls, windows or doors

✓ If the conservatory features an independent heating system with different temperature as well as on/off controls

✓ If the glazing and electrical installations are in total compliancewith the relevant regulatory requirements.

How Much Is A Conservatory Roof?

If you’re setting a budget for your new conservatory structure or perhaps you already have one and thinking about replacing the roof, knowing how much a new conservatory roof will cost from the onset can save you a lot of headache. However, knowing the correct cost won’t be easy as this is determined by a plethora of factors which is unique to each individual. In this article, we’re going to give a rough estimate of a conservatory roof cost so as to help you make an informed decision moving forward. Let’s have a look!

In order to determine the cost of your conservatory roof, the type of roof you go for must firstly be determined. This is because there is a wide array of conservatory roof types with each having its own unique price. You can opt for the uPVC glass roof, a tiled roof or a glass roof.

With so many other factors to consider, we’ll not be able to give you an exact amount. However, in general, a conservatory roof can cost anywhere within the range of £2500 to £8500. You may also quoted for more or less depending on your roof type as well as the specifications you opt for including the size and type of your conservatory. For instance, if you own a Lean-To conservatory with a size of 3.1m by 3.1m, for a glass conservatory roof, you can expect to spend anywhere within the range of £3000 to £3500. Meanwhile for a Victorian conservatory roof with a size of 5.1m by 5.1m, the cost will range between £5000 to £8000.

Therefore the type as well as size of your conservatory really does greatly impacts the cost of your conservatory roof.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.