Find a Conservatory Installer you can trust in Harwich.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

Lean-to conservatories are often known as Mediterranean conservatories or sunrooms and are a great way to add more living space when you’ve only got a small amount of room to work with. They usually have clean lines, a rectangular shape and attach to the side or rear of your home, which makes them one of the easiest conservatory types to build yourself.

So how do you build a wooden lean-to conservatory? The first step is to decide what you want it to look like. Most lean-to conservatories are constructed of glass and the wood frame, but you can choose to have dwarf walls too. Dwarf walls are low brick walls that are useful if you’re planning to plumb in radiators, have air conditioning installed or put plug sockets in the conservatory.

When you’ve decided what your wooden lean-to conservatory is going to look like, you’ll need to get the materials. You’ll need to choose a hardy wood – oak is the most expensive but also the most durable – and source glass for the windows. You’ll also need to decide on a roof material and work out the correct pitch.

The first step to building your wooden lean-to conservatory is to dig the foundations. You’ll then need to level the earth, then add concrete to the correct height, which should be lower than your property’s existing damp course. Then, you’ll build up to the damp course, which will be your conservatory’s floor level. Don’t forget to make sure it’s even.

If you’re building a dwarf wall, start it from the base and build up to no more than 1 metre high. Once the cement is dry, place external sills on top of the dwarf wall. You’ll then need to secure the frames; start with the one that secures to your property, then do the same for the rest, connecting outwards until they meet from the two sides. Then put up your doors.

Now it’s time to build the roof. This should be simple if you’ve bought your own custom-made kit. Place the roof ridge on top of the frames, then add the roof rafters between the roof ridge and hip bars. Fit your glazing sheets and guttering – it’s important that your wooden conservatory roof has guttering just like your house, otherwise your conservatory roof won’t last very long and could even cause rainwater to rot your wooden frames.

Once you’ve built your wooden lean-to conservatory, all that’s left is to decide on how you want to decorate it. But if this all sounds like too much, get in touch with specialist wooden conservatory installers who will be able to give you a quote for building you a lean-to conservatory.

uPVC is unplasticised polyvinyl chloride. It is a favourite amongst homeowners and manufacturers for its cheap production cost and excellent benefits. uPVC is used for window frames, conservatories and doors. In fact, uPVC can be three times cheaper than wooden frames and is also the most energy efficient option.As well as this, uPVC is now available in a range of colours other than the typically seen bright white finish. It can also be recycled, is durable and resistant to changing weather conditions.

If you are considering building a wooden conservatory in your home, it’s normal to be curious about whether or not the home improvement effort is costly. Basically, wooden conservatories are ones that have been constructed using a wooden structure. There are options to choose from which timber and this can also play a part in the amount you’ll have to pay. Conservatories using hardwood, which are more durable and requires less preparation, are also considerably costlier than the softwood counterpart.

For just the timber in a kit build your own conservatory you would be looking at around £10,000 to £20,000. Generally, a wooden conservatory built for you will cost you a range between £20,000 to £50,000 based on the type of wood, the size as well as the style you opt for.

In addition, wooden conservatory prices are also determined by the supplier you’re dealing with. As a result, it’s advisable to conduct a proper and detailed market research about the available suppliers and identify the one who truly offers quality materials at an affordable rate. If you wish to go for an Oak frame, the price will typically be higher.

To give your house a more traditional look, you can go for a timber conservatory rather than a uPVC one. However, it requires more maintenance than the uPVC as well as regular weatherproofing to prevent it from warping or rotting as a result of changes in humidity or temperature. If you want the timber look there are options with modern uPVC which can give a similar style but at a lower cost.

Most conservatories won’t require Building Regulations approval. However, if you’re planning a conservatory more than 30 square metres in floor space this may be required. If there is no linking door between the home and conservatory then Buildings Regulations approval will be needed too. For more information and to ensure getting everything right, speak to the local council or planning officer.

First and foremost, a conservatory or a sunroom is a structure attached to the sunny part of a house which possess glass walls and roof which enables the sun’s entrance into the space. Conservatories happen to be a very popular structure in the UK as home and property owners are able to subject it to wide variety of uses such for relaxation, entertainment, hangouts with family and friends, reading and lots more. Therefore, when the conservatory roof is leaking a lot of activities could be affected. Hence, the more reason why you should know hoe to repair this kind of issue by yourself. However, if you’re not confident enough to carry out this task, we’ll recommend you call in a professional who can guarantee the best output the first time. In this guide, we’re going to look at the conservatory roof leak repair process.

• Spot the leak. The first line of action is to examine the conservatory’s roof to identify the leaking part (tip - most leaks takes place around transparent roof panes edges). If you have a slanted roof, you’d have to look carefully. The spot where it drips may not necessary imply that its the leaking spot.
• Remove the old seal. Climb a ladder to access the leaking pane. Then, with the help of a utility knife, lift out the panel and clean all traces of the old sealant. Once done, simply lay down a bead of the new sealant in the frame, press the clear panel back in place and apply sealant to the outer edges.
• Cracked pane. If the existing pane is cracked or broken, simply hold the pieces tightly together by applying tape across the pane in various directions
• Leak sealing. Another option to fix leaks is by applying a sealant around the leaking pane without having to remove it.

If you’re planning to build an orangery extension on your property, then it only makes sense to estimate the possible cost before getting started. However, like several other home improvement projects, the cost of building an orangery extension is based on a wide array of factors such as your location ( within the UK), the size of the building, the orangery style in question, the materials to be incorporated as well as the finish you’re expecting to get.

Generally, to build an orangery, you’d have to spend within a range of £10,000 to £70,000. This variations in price depends on the factors earlier mentioned such as the type and size of the selected orangery. For a small orangery featuring a uPVC frame, you can get that done for nothing less than £10,000, but the price can jump to £60,000 or more if you want a large, timber-framed orangery built. For a superior quality, large and timber-framed orangery featuring a new fitted kitchen, you’d have to incur up to £70,000 in expenses (when you add the price of the new kitchen units as well as appliances).

The finish you want to achieve is one of the most influential factors determining the price of your orangery. If you want just the bare essentials (low end), the price ranges from £10,000 to £20,000, meanwhile the price for a blend of both basic and customized items ranges between £20,000 to £40,000. However, if you have a high taste and looking to get the best possible orangery with all fixtures and fittings of great quality, you’d have to spend between £35,000 to £60,000.

Furthermore, orangery’s cost will also be affected by how you wish to make use of the space, meaning an extra work may be required. This must also be taken into consideration to get a more accurate estimation of the cost.

Building a conservatory can be a challenging task. But whether you plan to hire a professional to build your aluminium conservatory or are considering DIY, it’s good to start with a rough idea of how the process works.

It’s essential to begin with a strong conservatory base. The area needs to be measured out carefully and then dug out. You then need to level the earth and pour in concrete. Your damp proof course goes on top of this, preventing rising damp from entering your structure and creating the floor level.

Then, you need to build your conservatory walls. Start by building your dwarf wall, positioning the external sills on top. Next, fix in the frames and hang your doors. Sit your roof ridge on top of the frames, and add the roof rafters.

Finally, you need to fit the glazing sheets and guttering. Once this is all done, your new aluminium conservatory is ready to go!