Find a Conservatory Installer you can trust in Strathpeffer.

Lean-to conservatories are often known as Mediterranean conservatories or sunrooms and are a great way to add more living space when you’ve only got a small amount of room to work with. They usually have clean lines, a rectangular shape and attach to the side or rear of your home, which makes them one of the easiest conservatory types to build yourself.

So how do you build a wooden lean-to conservatory? The first step is to decide what you want it to look like. Most lean-to conservatories are constructed of glass and the wood frame, but you can choose to have dwarf walls too. Dwarf walls are low brick walls that are useful if you’re planning to plumb in radiators, have air conditioning installed or put plug sockets in the conservatory.

When you’ve decided what your wooden lean-to conservatory is going to look like, you’ll need to get the materials. You’ll need to choose a hardy wood – oak is the most expensive but also the most durable – and source glass for the windows. You’ll also need to decide on a roof material and work out the correct pitch.

The first step to building your wooden lean-to conservatory is to dig the foundations. You’ll then need to level the earth, then add concrete to the correct height, which should be lower than your property’s existing damp course. Then, you’ll build up to the damp course, which will be your conservatory’s floor level. Don’t forget to make sure it’s even.

If you’re building a dwarf wall, start it from the base and build up to no more than 1 metre high. Once the cement is dry, place external sills on top of the dwarf wall. You’ll then need to secure the frames; start with the one that secures to your property, then do the same for the rest, connecting outwards until they meet from the two sides. Then put up your doors.

Now it’s time to build the roof. This should be simple if you’ve bought your own custom-made kit. Place the roof ridge on top of the frames, then add the roof rafters between the roof ridge and hip bars. Fit your glazing sheets and guttering – it’s important that your wooden conservatory roof has guttering just like your house, otherwise your conservatory roof won’t last very long and could even cause rainwater to rot your wooden frames.

Once you’ve built your wooden lean-to conservatory, all that’s left is to decide on how you want to decorate it. But if this all sounds like too much, get in touch with specialist wooden conservatory installers who will be able to give you a quote for building you a lean-to conservatory.

The short and simple answer to this question is yes, just like other new extensions, you must have a foundation done for your lean to conservatory. In order to transfer the building’s weight to the floor safely, there’s a need to construct a foundation. Without it, the structural integrity of the extension would be heavily compromised. What’s more? While there’s no minimum depth requirement for a lean to conservatory, there are multiple factors that can affect the depth as well as type of the foundation. Let’s take a look!

• The nearby trees. What trees do is to absorb water from the soil which can affect the foundation significantly. When water is absorbed from the soil, the soil shrinks which affects the foundation’s strength. The size as well as type of the tree will determine the extent of the water absorption from the ground.
• The soil’s suitability. The weight that each soil can withstand varies and even more so, when environmental factors have more effect on certain types of soils than others. For instance, chalk is able to drain water away relatively easily which means that nearby trees will only have a little effect on its quality. Clay, on the other hand, shrinks when drying and also retains a lot of water. This means that nearby trees will have huge impact on clay soil which will compromise the structural integrity of the lean to conservatory. Therefore, since changes to clay mostly occur to about 0.75m depth, foundations on the soil should be constructed deeper to compensate.
• Undisturbed ground. Before the foundations are laid, there’s a need to identify grounds that hasn’t been built on and this usually takes a depth of about 1m (this figure may vary especially in regions where drains have been laid).

Orangeries are being built by thousands in the country year in year out and for good reasons. Not only do they provide a cost effective alternative to moving home and boosting your property’s value, but can also be used all year round. If you’re looking for a room for all seasons, then you simply would not want to overlook building an orangery. They can be quite cosy in the winter months protecting you from the wind and rain, and keeping you warm, while you can throw the doors and windows to enjoy the sunshine during the summer months.

Orangeries can be used all year long as they’re made mostly of components which makes them stay warm all through the year, which is unlike conservatories that’s almost wholly made of glass meaning they are not suitable to be used during the colder months. This implies that orangeries can be used for almost any purpose throughout the year regardless of the time of year it is. What’s more? With a plethora of style and options of orangeries you can choose from, there’s hardly any space you can’t fit an orangery, be it small or large. In recent times, more and more homeowners are now using their orangeries for a variety of purposes such as game rooms, chill out area, lounges as well as dining rooms. They have this special ability to create a seamless transition from your home to your garden while also allowing you to alter the room’s layout all year round depending on your needs at the time.

So have you are considering having a David Salisbury orangery in your home? It’s a stylish and visually appealing extension which adds immense value to your property when it comes to resale. Almost every home buyer wants a house with a nice orangery and even more so, if it’s a David Salisbury orangery. However, the cost of constructing a David Salisbury orangery is dependent on a wide range of factors which includes your location ( within the UK), the size of the building, the orangery style in question, the materials to be incorporated as well as the finish you’re expecting to get.

Typically, to construct a David Salisbury orangery, you’d need to spend a sum between £10,000 to £70,000. This differences in price is based on the influences that have been stated earlier which includes the type as well as size of the selected David Salisbury orangery. If you wish to construct the small David Salisbury orangery featuring a uPVC frame, you can get that done at a price not less than £10,000, but this price can cost up to £60,000 or even more if you want a large, timber-framed orangery built. Meanwhile if you prefer a premium quality and timber-framed David Salisbury orangery that comes with a new fitted kitchen, it may cost up to £70,000 in expenses (when you add the price of the new kitchen units as well as appliances).

The finish you want to achieve is also one of the greatest influential factors that determines the cost of your David Salisbury orangery. For just the bare essentials (low end), the cost is between £10,000 to £20,000, meanwhile the cost for the mix of both basic and personalized items is within a range of £20,000 to £40,000. However, if you want a classy and distinctive David Salisbury orangery with superior quality fixtures and fittings, a more accurate cost estimate will range between £35,000 to £60,000.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

Getting its name from it’s original use and commonly mistaken for conservatories, orangeries were developed about four hundred years ago to help protect citrus fruits from the winter frosts. An orangery is basically a room extension featuring a flat perimeter roof, brick base as well as a central roof lantern including doors and windows. Even though it originates from Italy and made more modern by Holland’s architectural development, orangeries have grown to become an ubiquitous phenomenon within the British society with thousands of the extension being built every year. They’re built in a similar way to conservatories, however, orangeries are typically developed from a brick base and usually making use of a stone or brick pillars to provide support to a flat roof perimeter. Also, the common choice for an orangery is a central roof lantern including glass panels or vent windows. Unlike conservatories which usually make use of patio doors, orangeries are more likely to have more complex bi-folding door system - enhancing the visual appeal of the extension in a more unique and stylish way.

Orangeries typically incorporates less glass when compared to a conservatory - thereby, allowing a moderate amount of natural light into the space. This way, you would not have to go outdoors to enjoy the sunlight during the summer months. Generally, the extension also offers a atrium-style ceiling height while also protecting your space from excessive sunlight and adding character to your home.

In conclusion, orangeries are an excellent choice when it comes to extending your home - be it to make a room larger or adding a new room all together. Ultimately, they go a long way to add incredible value to your home for resale purposes. Orangeries are best installed by seasoned professionals in order to ensure the best outcome.

You might think that all wooden conservatories are the same. But there are actually lots of differences between them, and some conservatories are better than others. One of the most important factors to consider when you’re looking for a wooden conservatory is the type of wood that it’s made from. Generally, there are two different types to look out for: softwood and hardwood. So what wood should be used for a wooden conservatory?

Softwood conservatories are usually made from European redwood or Siberian larch. These types of conservatories are the cheapest wooden conservatories you can buy because the wood grows much faster than hardwoods. However, due to their soft nature, they may only last 7-15 years, reducing their cost-effectivity.

The best wood to use for a wooden conservatory is a hardwood. The most expensive type is oak, but you get what you pay for – it looks fabulous and it can also be coated with a bug and pest-resistant solution to increase its longevity. If you haven’t got the budget for oak, other hardwood options include Brazilian cedar, idigbo and luan, which are still great choices. Make sure you speak to your conservatory installer about the ‘closeness’ of the wood grains, as close-grained hardwoods are said to be the most suitable for conservatories. You should also check that your supplier has strict control of the quality of the wood so can ensure that it’s been well seasoned and prepared for use in construction.

A polycarbonate conservatory roof is made using a polycarbonate which is a contemporary plastic material that features several beneficial properties which gives it a high optical clarity as well as a good durability. Visually, it’s very similar to glass but its a lot more resistant to impact  which makes it just as strong as some metals. As a result, there are a lot of cases where polycarbonate is used as a replacement for security windows and more. If you happen to possess a polycarbonate conservatory, then you’d probably like to know how you can fix it in case of any damages. In this post, we’re going to consider how to repair polycarbonate conservatory roofs. Let’s take a look!

There are a bunch of effective methods you can consider for fusing or gluing polycarbonate plastic. Glues will leave an adhesive behind, while fusing results in a chemical reaction which enables the material to melt back together. Here is a great method you can use to repair polycarbonate plastic:

• Use of methyl methacrylate. Due to the fact that this creates a strong, resilient bond, methyl methacrylate is the best way to fuse polycarbonate. According to some of the users, if they try to pull the polycarbonate apart the unaffected part will break before the bond does. During the application of methyl methacrylate, you’d have to ensure you’re in a well ventilated area or outdoor. This is because the fume generated from methyl methacrylate can be toxic if it’s inhaled in a high concentration.