Find a Conservatory Installer you can trust in Ashton-under-lyne.

A polycarbonate conservatory roof is made using a polycarbonate which is a contemporary plastic material that features several beneficial properties which gives it a high optical clarity as well as a good durability. Visually, it’s very similar to glass but its a lot more resistant to impact  which makes it just as strong as some metals. As a result, there are a lot of cases where polycarbonate is used as a replacement for security windows and more. If you happen to possess a polycarbonate conservatory, then you’d probably like to know how you can fix it in case of any damages. In this post, we’re going to consider how to repair polycarbonate conservatory roofs. Let’s take a look!

There are a bunch of effective methods you can consider for fusing or gluing polycarbonate plastic. Glues will leave an adhesive behind, while fusing results in a chemical reaction which enables the material to melt back together. Here is a great method you can use to repair polycarbonate plastic:

• Use of methyl methacrylate. Due to the fact that this creates a strong, resilient bond, methyl methacrylate is the best way to fuse polycarbonate. According to some of the users, if they try to pull the polycarbonate apart the unaffected part will break before the bond does. During the application of methyl methacrylate, you’d have to ensure you’re in a well ventilated area or outdoor. This is because the fume generated from methyl methacrylate can be toxic if it’s inhaled in a high concentration.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

No matter how small or little your lean to conservatory is, the benefits that can be derived from it remains immense. Not only does it add to the value of your home by making it more attractive to potential buyers and securing you a long term investment, but it can also serve as a relaxation or hang out spot with family and friends. In fact, with the lean to conservatory’s simplistic design, it happens to be an economical way to extend your home and also to maximize your living space. If you’re considering to build a small lean to conservatory on your property, then you’d probably want to know exactly how much this is going to cost. In this post, we’re going to look at the price involved in constructing a small lean to conservatory.

When it comes to building a lean to conservatory, there are a bunch of factors that’ll play a key role in the final cost of the project. For example, you’d have to make a decision on the glazing options, roof type, size and more. All these factors will have a huge impact on the final cost you’re going to incur to complete the project. For instance, a polycarbonate roof material lean to conservatory with a size of 3500mm x 2000mm will cost within a range of £7000 to about £8000, while a glass roof material lean to conservatory of the same size will cost within the range of £7500 to about £8500. In order to get a more accurate cost estimate for your small lean to conservatory project, there’s the need to call in a professional to discuss your specific requirements as well as budget.

Whilst you may think conservatories are nearly all made from glass, this doesn’t have to be the case. If you live in a built-up area you could have a tiled rooftop to enable extra privacy, use obscure glass and even invest in blinds.Be aware that solid walls are possible but if the conservatory is manufactured with less than 50% of glass, you’ll need Buildings Regulations approval.

• The rules only apply to houses – flats and maisonettes are not included
• Only 50% of the area of land around the original house can be covered by extensions, including conservatories, and other buildings
• You mustn’t build the conservatory higher than the highest part of the original roof
• Where the wooden conservatory comes within 2 metres of the boundary, the height at the eaves can’t exceed 3 metres
• A rear wooden conservatory can’t extend beyond the rear wall of the original house by more than 4 metres if it’s a detached house, or more than 3 metres for any other type of house
• For side extensions, for example a lean-to wooden conservatory, it can’t exceed 4 metres in height and can only be up to half the width of the original house

Conservatories and orangeries look very similar, so it can be hard to tell what their differences are. The main thing that distinguishes the two is the amount of glazing they have.

Conservatories usually have a roof that is made up of at least 75% glass. Orangeries, on the other hand, have roofs that are generally less than 75% glass.

Conservatories also tend to have walls that are made up of at least 50% glass. However, orangeries have glass on less than 50% of the wall area.

Orangeries were originally developed to grow oranges in large stately homes. Their mixture of brick and glazing gave the oranges a combination of plenty of sunlight and shelter.

Building a conservatory can be a challenging task. But whether you plan to hire a professional to build your aluminium conservatory or are considering DIY, it’s good to start with a rough idea of how the process works.

It’s essential to begin with a strong conservatory base. The area needs to be measured out carefully and then dug out. You then need to level the earth and pour in concrete. Your damp proof course goes on top of this, preventing rising damp from entering your structure and creating the floor level.

Then, you need to build your conservatory walls. Start by building your dwarf wall, positioning the external sills on top. Next, fix in the frames and hang your doors. Sit your roof ridge on top of the frames, and add the roof rafters.

Finally, you need to fit the glazing sheets and guttering. Once this is all done, your new aluminium conservatory is ready to go!

If you are considering building a wooden conservatory in your home, it’s normal to be curious about whether or not the home improvement effort is costly. Basically, wooden conservatories are ones that have been constructed using a wooden structure. There are options to choose from which timber and this can also play a part in the amount you’ll have to pay. Conservatories using hardwood, which are more durable and requires less preparation, are also considerably costlier than the softwood counterpart.

For just the timber in a kit build your own conservatory you would be looking at around £10,000 to £20,000. Generally, a wooden conservatory built for you will cost you a range between £20,000 to £50,000 based on the type of wood, the size as well as the style you opt for.

In addition, wooden conservatory prices are also determined by the supplier you’re dealing with. As a result, it’s advisable to conduct a proper and detailed market research about the available suppliers and identify the one who truly offers quality materials at an affordable rate. If you wish to go for an Oak frame, the price will typically be higher.

To give your house a more traditional look, you can go for a timber conservatory rather than a uPVC one. However, it requires more maintenance than the uPVC as well as regular weatherproofing to prevent it from warping or rotting as a result of changes in humidity or temperature. If you want the timber look there are options with modern uPVC which can give a similar style but at a lower cost.