Find a Conservatory Installer you can trust in Juniper Green.

• The rules only apply to houses – flats and maisonettes are not included
• Only 50% of the area of land around the original house can be covered by extensions, including conservatories, and other buildings
• You mustn’t build the conservatory higher than the highest part of the original roof
• Where the wooden conservatory comes within 2 metres of the boundary, the height at the eaves can’t exceed 3 metres
• A rear wooden conservatory can’t extend beyond the rear wall of the original house by more than 4 metres if it’s a detached house, or more than 3 metres for any other type of house
• For side extensions, for example a lean-to wooden conservatory, it can’t exceed 4 metres in height and can only be up to half the width of the original house

Does It Take Long To Put A Solid Roof On A Conservatory?

If you’re interested in installing a solid roof on your conservatory, it may also interest you to know just how long the project is going to take. Well, the fitting of a solid conservatory roof is quite easy and quick with minimal disruption and mess around when done by a reliable professional. The process, however, involves removing the old existing roof of the conservatory rather than fitting the new roof over the old one which can lead to many complications. Generally, the entire process should take about 6 working days to complete. In this article, we’re going to provide a breakdown of each task as well as the duration to complete the individual tasks to give you an idea of the entire solid roof replacement process. Let’s take a look!

✓ Day 1 - Setting up of the site. This includes sealing off your conservatory from the rest of the house as well as laying of the floor protection. Furthermore, your existing conservatory roof will be removed and positioned in such a way to enable easy transportation and disposal. By the end of the first day, the installation of the new roof will completed and made to be water tight

✓ Day 2 - Insulation will be installed on the inside of your new solid roof.

✓ Day 3 - The replacement conservatory roof will be tiled and the insulated plasterboard will be installed inside.

✓ Day 4 - This involves finishing of the conservatory roof’s inside and outside. And all rubbish would be adequately disposed off.

✓ Day 5 - Your tiled conservatory roof’s new ceiling will be plastered.

✓ Day 6 - This day is free as the plaster is left to dry off properly.

Orangeries are being built by thousands in the country year in year out and for good reasons. Not only do they provide a cost effective alternative to moving home and boosting your property’s value, but can also be used all year round. If you’re looking for a room for all seasons, then you simply would not want to overlook building an orangery. They can be quite cosy in the winter months protecting you from the wind and rain, and keeping you warm, while you can throw the doors and windows to enjoy the sunshine during the summer months.

Orangeries can be used all year long as they’re made mostly of components which makes them stay warm all through the year, which is unlike conservatories that’s almost wholly made of glass meaning they are not suitable to be used during the colder months. This implies that orangeries can be used for almost any purpose throughout the year regardless of the time of year it is. What’s more? With a plethora of style and options of orangeries you can choose from, there’s hardly any space you can’t fit an orangery, be it small or large. In recent times, more and more homeowners are now using their orangeries for a variety of purposes such as game rooms, chill out area, lounges as well as dining rooms. They have this special ability to create a seamless transition from your home to your garden while also allowing you to alter the room’s layout all year round depending on your needs at the time.

With the ability of orangeries to create additional space in your home as well as altering the appearance of your property completely, it’s very likely you’ll require a planning permission to construct an orangery. However, with the lengthy and complicated application process, you might want to consider the few exemptions before getting started.

If you’re considering to build an home extension such as an orangery, the obvious first step would be to consider whether or not you’ll need planning permission. And while you tend to get carried away in the thought of adding new beautiful living space, you should never forget to take into account your area’s planning regulation as well as the planning process realities. However, the application process is not one of the most exciting activities any homeowner would like to pass through and even more so when they live in a conservation area or possess a listed property that can even make the process a lot more challenging.

It’s recommended that you consult your plans and ideas with a professional such as an architect, building design company or a chartered surveyor, but there are some options you can put into consideration if you want to avoid the applying for a planning permission.

If you’re sure about not wanting to apply for a planning permission, you’d have to check your area to identify the possible local planning implications and determine whether or not your home has permitted development right which allows for some building works that can be made without the need to apply for a planning permission. To do this, simply check the government’s planning portal to determine whether your project is covered by the permitted development rights or applying for a planning permission would be required. What’s more? You need to determine if your building is listed especially if you live in a period property. For listed building, it can be much more difficult to get a planning permission as you must comply with some very specific regulations.

Conservatories have long been a favourite home improvement with homeowners, and there are no signs of that trend going away. And because of that, they add value to homes.

Wooden conservatories add value to your home just as any other type would. In fact, in some cases a wooden conservatory will add more value to your property than a uPVC or aluminium one, for example if your home is a period property. A wooden conservatory will fit in keeping with the rest of an older property, so buyers will prefer a period home with a wood conservatory over a uPVC one.

It’s important to remember that wooden conservatories cost more than uPVC ones, but that does mean that they will add more value. They look more stylish than uPVC conservatories and may last just as long with the right care and maintenance, so if a wooden conservatory would complement your home much more than uPVC they’re worth looking into.

A wooden conservatory will set you back anywhere between £25,000 to £60,000, so factor this in when you’re thinking about how much value it will add to your home. It’s also worth thinking about the other things that will have an impact on the value it will add to your home, such your property’s location, whether conservatories are a common addition to houses in your area, the general look of your home and whether the conservatory would take up a large part of your garden. If you’re unsure whether a wooden conservatory will add enough value to your home, you could speak to a surveyor or valuer to give you their opinion before you start any work.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

How To Tile Conservatory Roof

If you’re thinking about replacing your old conservatory roof with a tiled one, you’d probably want to know how you can go about it. Tiling of a conservatory roof comes with a plethora of benefits with the most significant one being a much improved insulation which helps you save money on heating bills. This activity is also, however, a task that is best done by a professional. It requires working at height which can be very dangerous and also demands a particular set of skills as well as confidence to make the project a safe and successful one. In other words, if you lack any of the aforementioned attributes, then we’d strongly recommend that you call in a reliable professional who can guarantee the best results for help. In this article, we’ll walk you through the conservatory roof tiling process.

✓ Remove the existing roof. As you would have guessed, the first step is to remove the old existing roof and dispose off in an environmental friendly way.

✓ Glass Reinforced Plastic (GRP) rafters are fitted so as to develop the structural frame for the new solid roof.

✓ Waterproofing. The next step is to add 100% waterproof sheets under the GRP rafters.

✓ Insulation. Once the waterproof sheets have been installed, it’s then time to fit the insulation boards making sure that there’s a 15mm gap between the boards and the waterproof sheets.

✓ Outer sheets. To minimize the number of roofing bars and increase the conservatory’s efficiency, you’ll have to include the outer sheets at this stage.

✓ Tiling. This is the final step in the process. Add the tiles to the conservatory roof and make sure that they’re firmly secured. This wouldn’t take forever as most conservatories are not that big in size.

uPVC is unplasticised polyvinyl chloride. It is a favourite amongst homeowners and manufacturers for its cheap production cost and excellent benefits. uPVC is used for window frames, conservatories and doors. In fact, uPVC can be three times cheaper than wooden frames and is also the most energy efficient option.As well as this, uPVC is now available in a range of colours other than the typically seen bright white finish. It can also be recycled, is durable and resistant to changing weather conditions.