Find a Conservatory Installer you can trust in Saltburn-by-the-sea.

This varies according to the quality of the conservatory and installation work. If these are both high quality, your conservatory should last at least 25 years. But obviously if you notice deterioration or leaks, then this could be an early warning sign that time is running out.

Are Solid Roof Conservatories Any Good?

If your old old glazed conservatory roof is starting to yield to the elements, perhaps it’s time to starting putting your money where your roof is. In recent times, most homeowners in the UK are now opting for the solid, tiled conservatory roofing alternative and for a good reason. If you’re also wondering if solid conservatories are of any good, then you’ve come to the right place! In the article, we’re going to discuss whether or not solid roof conservatories are a solid worthwhile investment and reasons for the stand.

Firstly, let’s look at what wrong with the normal conservatory roofs. Despite the fact that these are the cheaper alternative, it must however be said that they’re lacking in terms of insulation. A bad insulation can only mean discomfort all year round - winter will be cold and draughty and summer, stuffy and baking.

Solid roof conservatories, on the other hand, are made from special material that resembles traditional roof tiles but will only have a fraction of the weight. They’re able to deliver a much better insulation than a glazed roof which implies comfort all year round. What’s more? They’re very easy and quick to install, and as a result of their lightweight, you can easily transport them and use them for an underlying structure. The solid roof conservatories are a worthwhile investment which also provides the following advantages:

✓ It helps you save money. If they actually cost more, how can they save money? The solid roof conservatories provides many benefits but the most obvious one is improved insulation. And when a space is properly insulated, your heating bills will be significantly reduced. Hence, saving you some money.

✓ It also improves the safety of both you and your loved ones.

Generally, if you want to do a job, you can as well ensure that’s done properly. You may be considering building a small base for an orangery, but no matter how small it is, it just shouldn’t be done to any other than a compliant standard, and that’s whether or not an approval is needed. When it comes to building work which is covered by Building Regulations, you are required to comply (by the law) with the regulations and to make use of one of the two types of Building Control Service available. These includes the Building Control Service given by your local authority or the Building Control Service given by approved inspectors.

Regardless of the service you opt for, you’re going to pay but the preferred service may offer an advice before commencement of the project. The individual carrying out the building work is charged with the responsibility of ensuring total compliance with the regulations. Therefore, if you select to undertake the project by yourself, the responsibility is primarily on you. In the same vein, if you opt for a building company the responsibility would be the company’s, but you should always ensure to confirm this position before commencement of the project. You must also take note that you may be served with an enforcement notice if you fail to comply with the regulations as the owner of the building. So it’s advisable that you choose your builder very carefully.

There are a bunch of elements you may require approval for like the structural integrity, appropriate insulation levels, or the construction of a building over drainage or sewage. In cases where it’s obvious that you’d need building regulations, you can simply submit the building and planning application together at once.

Are you considering extending your living space into a visually appealing orangery? However, before you go ahead with the project, you may want to know exactly what you’re getting yourself into. It is rather important to let you know calling on a seasoned professional for help when it comes to building an orangery is the best bet especially if you lack proper training or experience. This way, you get to avoid costly errors while also saving yourself some time and money. Here, we’ll give you the needed information on how to go about building an orangery.

• Orangery Planning

This is, perhaps, the most important step when it comes to orangery building. There is a need to conduct a proper planning to ensure everything goes right and exactly the way you want it. The first thing to do is to perform the required planning permission checks to determine whether or not your orangery covered under the “permitted development. In some areas, there may be some strict restrictions as the structure’s size. So you just might want to consult your local planning development before taking any step forward.

You can contact any architect for help with the acquisition of the right planning permission. While doing this, also have it in mind that your plans will need to be approved before you can proceed. Once done, it can be very challenge to alter the plans without extra delays or additional costs.

• Construction of Orangery

Do you have any builder in mind? If yes, make sure you inform your architect to be sure he’s happy to work with them. The selected builder will take your plan and build the orangery to your taste as given in the plan. The fitter will put the doors and windows in place as well as the roof lantern.

Conservatories and orangeries look very similar, so it can be hard to tell what their differences are. The main thing that distinguishes the two is the amount of glazing they have.

Conservatories usually have a roof that is made up of at least 75% glass. Orangeries, on the other hand, have roofs that are generally less than 75% glass.

Conservatories also tend to have walls that are made up of at least 50% glass. However, orangeries have glass on less than 50% of the wall area.

Orangeries were originally developed to grow oranges in large stately homes. Their mixture of brick and glazing gave the oranges a combination of plenty of sunlight and shelter.

A polycarbonate conservatory roof is made using a polycarbonate which is a contemporary plastic material that features several beneficial properties which gives it a high optical clarity as well as a good durability. Visually, it’s very similar to glass but its a lot more resistant to impact  which makes it just as strong as some metals. As a result, there are a lot of cases where polycarbonate is used as a replacement for security windows and more. If you happen to possess a polycarbonate conservatory, then you’d probably like to know how you can fix it in case of any damages. In this post, we’re going to consider how to repair polycarbonate conservatory roofs. Let’s take a look!

There are a bunch of effective methods you can consider for fusing or gluing polycarbonate plastic. Glues will leave an adhesive behind, while fusing results in a chemical reaction which enables the material to melt back together. Here is a great method you can use to repair polycarbonate plastic:

• Use of methyl methacrylate. Due to the fact that this creates a strong, resilient bond, methyl methacrylate is the best way to fuse polycarbonate. According to some of the users, if they try to pull the polycarbonate apart the unaffected part will break before the bond does. During the application of methyl methacrylate, you’d have to ensure you’re in a well ventilated area or outdoor. This is because the fume generated from methyl methacrylate can be toxic if it’s inhaled in a high concentration.

Whilst uPVC is the UK’s favourite because it’s cheap to manufacture and has a number of qualities, there are also options available including aluminium and hardwood. Both are popular for various reasons.Aluminium, as a metal, is the strongest and most durable material available for conservatories. On top of this it won’t rust, warp or crack. Hardwood offers a more traditional appeal and whilst it requires high maintenance levels, is perfect for conservation areas and listed buildings.

Building a conservatory can be a challenging task. But whether you plan to hire a professional to build your aluminium conservatory or are considering DIY, it’s good to start with a rough idea of how the process works.

It’s essential to begin with a strong conservatory base. The area needs to be measured out carefully and then dug out. You then need to level the earth and pour in concrete. Your damp proof course goes on top of this, preventing rising damp from entering your structure and creating the floor level.

Then, you need to build your conservatory walls. Start by building your dwarf wall, positioning the external sills on top. Next, fix in the frames and hang your doors. Sit your roof ridge on top of the frames, and add the roof rafters.

Finally, you need to fit the glazing sheets and guttering. Once this is all done, your new aluminium conservatory is ready to go!