Find a Conservatory Installer you can trust in Isle Of Benbecula.

Do I Need Planning Permission For A Wooden Conservatory?

The addition of a conservatory to your home is classified as a “permitted development and according to the 2008 legislation, you do not need to apply for a planning permission to add a wooden conservatory to your home so far you are within some particular limits. These regulations are summarized below:

• All extensions must not be more than one storey and the height must be lower or equal to the existing building’s roof or 4m at the maximum.

• There are multiple limitations on the extent you can extend from your existing property depending on a few factors such as the type of your house as well as the location of the extension, be it at the rear or side of the building.

• If your wooden conservatory is to be constructed at the rear, it must not go beyond 3 metres from the attached house’s original property and 4 metres in a detached house. Also, the wooden conservatory mustn’t go beyond half the space around the property.

• The wooden conservatory must not go beyond half the size of the original house. Similar conditions govern that of the space around the existing building.

• Extensions that are not covered by the permitting rights are the ones constructed in front of the property or those directly facing the main street or road.

• Listed Building content may be needed in the event whereby there’s a Listed Building proposed work.

This is just a brief of the conditions that applies, however, the fact remains most property owners can have a wooden conservatory installed without having to apply for planning permission. It is advisable to consult your local planning office before you construct an extension. In certain cases, all work may require planning permission if there’s a permitted development rights removal. Click here to learn more about wooden conservatories

The short and simple answer to this question is yes, just like other new extensions, you must have a foundation done for your lean to conservatory. In order to transfer the building’s weight to the floor safely, there’s a need to construct a foundation. Without it, the structural integrity of the extension would be heavily compromised. What’s more? While there’s no minimum depth requirement for a lean to conservatory, there are multiple factors that can affect the depth as well as type of the foundation. Let’s take a look!

• The nearby trees. What trees do is to absorb water from the soil which can affect the foundation significantly. When water is absorbed from the soil, the soil shrinks which affects the foundation’s strength. The size as well as type of the tree will determine the extent of the water absorption from the ground.
• The soil’s suitability. The weight that each soil can withstand varies and even more so, when environmental factors have more effect on certain types of soils than others. For instance, chalk is able to drain water away relatively easily which means that nearby trees will only have a little effect on its quality. Clay, on the other hand, shrinks when drying and also retains a lot of water. This means that nearby trees will have huge impact on clay soil which will compromise the structural integrity of the lean to conservatory. Therefore, since changes to clay mostly occur to about 0.75m depth, foundations on the soil should be constructed deeper to compensate.
• Undisturbed ground. Before the foundations are laid, there’s a need to identify grounds that hasn’t been built on and this usually takes a depth of about 1m (this figure may vary especially in regions where drains have been laid).

A polycarbonate conservatory roof is made using a polycarbonate which is a contemporary plastic material that features several beneficial properties which gives it a high optical clarity as well as a good durability. Visually, it’s very similar to glass but its a lot more resistant to impact  which makes it just as strong as some metals. As a result, there are a lot of cases where polycarbonate is used as a replacement for security windows and more. If you happen to possess a polycarbonate conservatory, then you’d probably like to know how you can fix it in case of any damages. In this post, we’re going to consider how to repair polycarbonate conservatory roofs. Let’s take a look!

There are a bunch of effective methods you can consider for fusing or gluing polycarbonate plastic. Glues will leave an adhesive behind, while fusing results in a chemical reaction which enables the material to melt back together. Here is a great method you can use to repair polycarbonate plastic:

• Use of methyl methacrylate. Due to the fact that this creates a strong, resilient bond, methyl methacrylate is the best way to fuse polycarbonate. According to some of the users, if they try to pull the polycarbonate apart the unaffected part will break before the bond does. During the application of methyl methacrylate, you’d have to ensure you’re in a well ventilated area or outdoor. This is because the fume generated from methyl methacrylate can be toxic if it’s inhaled in a high concentration.

The roof is the place that your conservatory is most likely to get grubby, but cleaning it is easy. You shouldn’t need to use any powerful cleaners – just warm water and a mild detergent.

The best tool to use to access your conservatory roof is a telescopic brush. This will help you get into corners and high areas without needing to work from height. You can use a ladder to help you clean your conservatory roof, but you should be very careful to avoid leaning it against any glazing

.

Consider investing in a telescopic cleaner with squeegee, brush and mop attachments to help you achieve a great finish on your aluminium conservatory.

Generally, if you want to do a job, you can as well ensure that’s done properly. You may be considering building a small base for an orangery, but no matter how small it is, it just shouldn’t be done to any other than a compliant standard, and that’s whether or not an approval is needed. When it comes to building work which is covered by Building Regulations, you are required to comply (by the law) with the regulations and to make use of one of the two types of Building Control Service available. These includes the Building Control Service given by your local authority or the Building Control Service given by approved inspectors.

Regardless of the service you opt for, you’re going to pay but the preferred service may offer an advice before commencement of the project. The individual carrying out the building work is charged with the responsibility of ensuring total compliance with the regulations. Therefore, if you select to undertake the project by yourself, the responsibility is primarily on you. In the same vein, if you opt for a building company the responsibility would be the company’s, but you should always ensure to confirm this position before commencement of the project. You must also take note that you may be served with an enforcement notice if you fail to comply with the regulations as the owner of the building. So it’s advisable that you choose your builder very carefully.

There are a bunch of elements you may require approval for like the structural integrity, appropriate insulation levels, or the construction of a building over drainage or sewage. In cases where it’s obvious that you’d need building regulations, you can simply submit the building and planning application together at once.

Conservatories and orangeries look very similar, so it can be hard to tell what their differences are. The main thing that distinguishes the two is the amount of glazing they have.

Conservatories usually have a roof that is made up of at least 75% glass. Orangeries, on the other hand, have roofs that are generally less than 75% glass.

Conservatories also tend to have walls that are made up of at least 50% glass. However, orangeries have glass on less than 50% of the wall area.

Orangeries were originally developed to grow oranges in large stately homes. Their mixture of brick and glazing gave the oranges a combination of plenty of sunlight and shelter.

Lean-to conservatories happens to be some of the most versatile and underestimated conservatory styles you’ll find in the market today and little wonder they’re so popular in the UK. Lean to conservatories, also referred to garden sun room, have been an integral part of the English garden for almost a century. Some of the common features of this extension is being spacious, having large expanses of glazing as well as a special low pitched roof. In other words, lean-to conservatories are able to offer extra space while maximizing natural light and can also be easily installed into awkward spaces.

If you’re also thinking about getting a lean to conservatory, then you’d probably want know the numerous benefits that comes with it. In this post, we’re going to consider some of the reasons why installing a lean to conservatory is a smart decision.

1. It’s easily adaptable to most property styles. Possessing simple lines as well as slim slightlines a lean to conservatory can fit several styles of both traditional and modern homes. In fact, the low pitched roof makes the entire structure a lot easier to fit in rather awkward spaces, making them the ideal choice if you’re have limited outside space.
2. It’s very cost effective. This conservatory style happens to be one of the most affordable and cost effective type of conservatory you’ll find around. Due to their simple design as well as structure, both the cost of installation and maintenance can be minimized, saving you some cool bucks.
3. It offers more usable space. Lean to conservatory’s large design and smart design makes it suitable to add an additional usable space to your home or property.

First and foremost, a conservatory or a sunroom is a structure attached to the sunny part of a house which possess glass walls and roof which enables the sun’s entrance into the space. Conservatories happen to be a very popular structure in the UK as home and property owners are able to subject it to wide variety of uses such for relaxation, entertainment, hangouts with family and friends, reading and lots more. Therefore, when the conservatory roof is leaking a lot of activities could be affected. Hence, the more reason why you should know hoe to repair this kind of issue by yourself. However, if you’re not confident enough to carry out this task, we’ll recommend you call in a professional who can guarantee the best output the first time. In this guide, we’re going to look at the conservatory roof leak repair process.

• Spot the leak. The first line of action is to examine the conservatory’s roof to identify the leaking part (tip - most leaks takes place around transparent roof panes edges). If you have a slanted roof, you’d have to look carefully. The spot where it drips may not necessary imply that its the leaking spot.
• Remove the old seal. Climb a ladder to access the leaking pane. Then, with the help of a utility knife, lift out the panel and clean all traces of the old sealant. Once done, simply lay down a bead of the new sealant in the frame, press the clear panel back in place and apply sealant to the outer edges.
• Cracked pane. If the existing pane is cracked or broken, simply hold the pieces tightly together by applying tape across the pane in various directions
• Leak sealing. Another option to fix leaks is by applying a sealant around the leaking pane without having to remove it.