Find a Conservatory Installer you can trust in Woking.

Do I Need Planning Permission For A Wooden Conservatory?

The addition of a conservatory to your home is classified as a “permitted development and according to the 2008 legislation, you do not need to apply for a planning permission to add a wooden conservatory to your home so far you are within some particular limits. These regulations are summarized below:

• All extensions must not be more than one storey and the height must be lower or equal to the existing building’s roof or 4m at the maximum.

• There are multiple limitations on the extent you can extend from your existing property depending on a few factors such as the type of your house as well as the location of the extension, be it at the rear or side of the building.

• If your wooden conservatory is to be constructed at the rear, it must not go beyond 3 metres from the attached house’s original property and 4 metres in a detached house. Also, the wooden conservatory mustn’t go beyond half the space around the property.

• The wooden conservatory must not go beyond half the size of the original house. Similar conditions govern that of the space around the existing building.

• Extensions that are not covered by the permitting rights are the ones constructed in front of the property or those directly facing the main street or road.

• Listed Building content may be needed in the event whereby there’s a Listed Building proposed work.

This is just a brief of the conditions that applies, however, the fact remains most property owners can have a wooden conservatory installed without having to apply for planning permission. It is advisable to consult your local planning office before you construct an extension. In certain cases, all work may require planning permission if there’s a permitted development rights removal. Click here to learn more about wooden conservatories

How Long Do UPVC Conservation Last?

UPVC conservatories are common features on residences across the UK for a good reason. Not only do they give you the extra living space you so much desire within your home or property, but they also go a long way to add value to your property. So if you’re also thinking about constructing a UPVC conservation within your home, you’re probably not alone! One of the several benefits of the structure is also its longevity, however this is dependent on a number of factors. Let’s take a closer look!

Modern UPVC windows will normally last between 20 to 25 years, however some are able to last much longer provided they’re properly maintained and top quality materials are used. And thanks to improvements in colour technology, the finish on UPVC tends to last much longer too.

Some of the factors that can go a long way to determine the longevity of your UPVC conservation includes the type of roofing materials used, how well it’s being maintained, the location or placement of the structure, replacement of individual conservatory parts, as well as insulation.

The type of roofing material for a UPVC conservation can either be glass, polycarbonate or tiles. The glass and polycarbonate roofs usually lasts for a minimum of 20 years when it’s properly installed and provided with the necessary upkeep. Meanwhile, tiled UPVC conservation roof are generally expected to last up to 50 years which is significantly longer than the counterparts - glass and polycarbonate. Interestingly, they require little to no maintenance and are also very unlikely to get damaged during the upkeep.

It’s also very important to make use of a reliable and reputable company to have your UPVC conservatory installed. This is because your structure can only be as good as the company responsible for its installation. So if you require a structures that will last for decades, you should pay great attention to the company you’ll hire.

Aluminium conservatories are really easy to maintain, making them a top choice for many homeowners. Unlike wooden conservatories, they don’t need regular treatment to ensure they don’t deteriorate.

The most you’ll need to do to keep your aluminium conservatory looking great is give the frames and glass an odd wipe with water and a mild detergent to get rid of any occasional dirt.

How To Put A Tiled Roof On A Conservatory

The roof is a vital part of any structure as it protects it from the elements such as snow, rain and lots more. When you have a conservatory built, the roof is just as important as that of the rest of the house. After all, both you and your loved ones will spend a lot of time there over several years, so you can as well give it a proper protection from the elements. So if you’re thinking about installing a tiled roof on your conservatory by yourself, you’ve come to the right place! However, it must be said that this is no easy task and should not be attempted as a DIY task if you do not have a proper training or the confidence needed to pull it off.

✓ Due to the fact that there are a wide range of tiled roofs to choose from, you have to think about the type of tiled roof you need before you proceed. The basic ones include composite panels, slate, synthetic tiles as well as concrete tiles.

✓ Examine the framework. It’s important to make sure that the framework possesses the right structure before adding theroof

✓ Remove the old roof panels. There’s the need to remove the poorly insulated glazed conservatory roof before installing the new tiled roof for a great efficiency.

✓ Change the existing roof frame. Apparently, there’s also a need to detach the older roof frame in order to install the new tiled roof. You have to change the old frame to one that’s suitable for the new tiles to be attached to.

✓ Add the tiles. To add the tiles. Simply lay them out across the roof and clipped on. This shouldn’t take that much time since a conservation isn’t a usually a big structure.

If you’ve ever looked into different types of conservatories, you’ll see that wooden conservatories are not the cheapest. However, that’s not a reason to dismiss them as an option for your home.

Wooden conservatories can cost anywhere between £15,000 to £60,000. While this may seem expensive, they are often a much classier option for your home and are ideal for period homes and those in a conservation area where uPVC might not be permitted.

If you choose a hardwood conservatory, you could see your conservatory last over 15 years. Most uPVC conservatories will only last around this time, and as they get old they can look shabby; it’s common for the frames to discolour in the sun. With good maintenance, wooden conservatories can look fabulous for years. Wood naturally retains heat too, so ensure that you use low-e internal glass which reflects heat back into the room and you’ll have as warm a conservatory as any.

When you weigh up all of the pros and cons of uPVC conservatories compared with wooden ones, you might come to the conclusion that wooden conservatories aren’t that expensive when it boils down to it. Although the initial cost is higher, you’ll get a better-looking conservatory that works with both modern and period properties and will look elegant and tasteful for years to come.

The roof is the place that your conservatory is most likely to get grubby, but cleaning it is easy. You shouldn’t need to use any powerful cleaners – just warm water and a mild detergent.

The best tool to use to access your conservatory roof is a telescopic brush. This will help you get into corners and high areas without needing to work from height. You can use a ladder to help you clean your conservatory roof, but you should be very careful to avoid leaning it against any glazing

.

Consider investing in a telescopic cleaner with squeegee, brush and mop attachments to help you achieve a great finish on your aluminium conservatory.

Lean-to conservatories are often known as Mediterranean conservatories or sunrooms and are a great way to add more living space when you’ve only got a small amount of room to work with. They usually have clean lines, a rectangular shape and attach to the side or rear of your home, which makes them one of the easiest conservatory types to build yourself.

So how do you build a wooden lean-to conservatory? The first step is to decide what you want it to look like. Most lean-to conservatories are constructed of glass and the wood frame, but you can choose to have dwarf walls too. Dwarf walls are low brick walls that are useful if you’re planning to plumb in radiators, have air conditioning installed or put plug sockets in the conservatory.

When you’ve decided what your wooden lean-to conservatory is going to look like, you’ll need to get the materials. You’ll need to choose a hardy wood – oak is the most expensive but also the most durable – and source glass for the windows. You’ll also need to decide on a roof material and work out the correct pitch.

The first step to building your wooden lean-to conservatory is to dig the foundations. You’ll then need to level the earth, then add concrete to the correct height, which should be lower than your property’s existing damp course. Then, you’ll build up to the damp course, which will be your conservatory’s floor level. Don’t forget to make sure it’s even.

If you’re building a dwarf wall, start it from the base and build up to no more than 1 metre high. Once the cement is dry, place external sills on top of the dwarf wall. You’ll then need to secure the frames; start with the one that secures to your property, then do the same for the rest, connecting outwards until they meet from the two sides. Then put up your doors.

Now it’s time to build the roof. This should be simple if you’ve bought your own custom-made kit. Place the roof ridge on top of the frames, then add the roof rafters between the roof ridge and hip bars. Fit your glazing sheets and guttering – it’s important that your wooden conservatory roof has guttering just like your house, otherwise your conservatory roof won’t last very long and could even cause rainwater to rot your wooden frames.

Once you’ve built your wooden lean-to conservatory, all that’s left is to decide on how you want to decorate it. But if this all sounds like too much, get in touch with specialist wooden conservatory installers who will be able to give you a quote for building you a lean-to conservatory.

The short and simple answer to this question is yes, just like other new extensions, you must have a foundation done for your lean to conservatory. In order to transfer the building’s weight to the floor safely, there’s a need to construct a foundation. Without it, the structural integrity of the extension would be heavily compromised. What’s more? While there’s no minimum depth requirement for a lean to conservatory, there are multiple factors that can affect the depth as well as type of the foundation. Let’s take a look!

• The nearby trees. What trees do is to absorb water from the soil which can affect the foundation significantly. When water is absorbed from the soil, the soil shrinks which affects the foundation’s strength. The size as well as type of the tree will determine the extent of the water absorption from the ground.
• The soil’s suitability. The weight that each soil can withstand varies and even more so, when environmental factors have more effect on certain types of soils than others. For instance, chalk is able to drain water away relatively easily which means that nearby trees will only have a little effect on its quality. Clay, on the other hand, shrinks when drying and also retains a lot of water. This means that nearby trees will have huge impact on clay soil which will compromise the structural integrity of the lean to conservatory. Therefore, since changes to clay mostly occur to about 0.75m depth, foundations on the soil should be constructed deeper to compensate.
• Undisturbed ground. Before the foundations are laid, there’s a need to identify grounds that hasn’t been built on and this usually takes a depth of about 1m (this figure may vary especially in regions where drains have been laid).