Find a Conservatory Installer you can trust in Warwickshire.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

Many conservatories fall under permitted development which means they don’t require planning permission. There are exceptions to this though, especially if you’re looking to have a large conservatory installed. Read our guide on conservatory planning permission for more information.

Getting its name from it’s original use and commonly mistaken for conservatories, orangeries were developed about four hundred years ago to help protect citrus fruits from the winter frosts. An orangery is basically a room extension featuring a flat perimeter roof, brick base as well as a central roof lantern including doors and windows. Even though it originates from Italy and made more modern by Holland’s architectural development, orangeries have grown to become an ubiquitous phenomenon within the British society with thousands of the extension being built every year. They’re built in a similar way to conservatories, however, orangeries are typically developed from a brick base and usually making use of a stone or brick pillars to provide support to a flat roof perimeter. Also, the common choice for an orangery is a central roof lantern including glass panels or vent windows. Unlike conservatories which usually make use of patio doors, orangeries are more likely to have more complex bi-folding door system - enhancing the visual appeal of the extension in a more unique and stylish way.

Orangeries typically incorporates less glass when compared to a conservatory - thereby, allowing a moderate amount of natural light into the space. This way, you would not have to go outdoors to enjoy the sunlight during the summer months. Generally, the extension also offers a atrium-style ceiling height while also protecting your space from excessive sunlight and adding character to your home.

In conclusion, orangeries are an excellent choice when it comes to extending your home - be it to make a room larger or adding a new room all together. Ultimately, they go a long way to add incredible value to your home for resale purposes. Orangeries are best installed by seasoned professionals in order to ensure the best outcome.

Building a conservatory can be a challenging task. But whether you plan to hire a professional to build your aluminium conservatory or are considering DIY, it’s good to start with a rough idea of how the process works.

It’s essential to begin with a strong conservatory base. The area needs to be measured out carefully and then dug out. You then need to level the earth and pour in concrete. Your damp proof course goes on top of this, preventing rising damp from entering your structure and creating the floor level.

Then, you need to build your conservatory walls. Start by building your dwarf wall, positioning the external sills on top. Next, fix in the frames and hang your doors. Sit your roof ridge on top of the frames, and add the roof rafters.

Finally, you need to fit the glazing sheets and guttering. Once this is all done, your new aluminium conservatory is ready to go!

Conservatories and orangeries look very similar, so it can be hard to tell what their differences are. The main thing that distinguishes the two is the amount of glazing they have.

Conservatories usually have a roof that is made up of at least 75% glass. Orangeries, on the other hand, have roofs that are generally less than 75% glass.

Conservatories also tend to have walls that are made up of at least 50% glass. However, orangeries have glass on less than 50% of the wall area.

Orangeries were originally developed to grow oranges in large stately homes. Their mixture of brick and glazing gave the oranges a combination of plenty of sunlight and shelter.

• The rules only apply to houses – flats and maisonettes are not included
• Only 50% of the area of land around the original house can be covered by extensions, including conservatories, and other buildings
• You mustn’t build the conservatory higher than the highest part of the original roof
• Where the wooden conservatory comes within 2 metres of the boundary, the height at the eaves can’t exceed 3 metres
• A rear wooden conservatory can’t extend beyond the rear wall of the original house by more than 4 metres if it’s a detached house, or more than 3 metres for any other type of house
• For side extensions, for example a lean-to wooden conservatory, it can’t exceed 4 metres in height and can only be up to half the width of the original house

What Is The Best Material For A Conservatory Roof?

In the past, conservatories normally have just a single roof material option - polycarbonate. However, there are a number of problems that was faced by some of the older models such as overheating, leaking roof, cold spots as well as poor sound insulation. With the great improvement in conservatory roof technology, better models have been developed which have completely eradicated these issues.

In recent times, we now have a wider varieties of materials that are incorporated to make conservatory roofs which are able to perform much better for a longer period of time. While tiled roof are incredibly useful to minimize heat loss, glass roof make use of clever reflective coating to keep the space at a comfortable temperature and modern polycarbonate roofs are now more energy efficient than it has ever been. So picking the best material for your conservatory roof is now a matter of preference.

✓ Glass conservatory roofs. This type of conservatory roof material is the perfect choice if you want a sleek, architectural finish for your conservatory. Not only are they available indifferent shapes and sizes, but you can also choose a large atrium style roof. They are made using solid aluminium frames that works to support the glass units which are thermally efficient and designed to retain natural heat while reflecting the sun’s glare.

✓ Tiled conservatory roof. Tiles roof are able to fit both the shape and size of your conservatory which provides you with a sloping or vaulted ceiling. They come in varying tiled finishes to match any style home like Marley clay, slate grey, pale shingles amongst others. Tiled roof are also called “warm roofs due to their particularly high levels of thermal insulation. They can also be installed quite easily and as quickly as any other conservatory roof options.