Find a Decorator you can trust in Ripon.

Hiring a decorator for your project always seem easy until you get started. With a wide range of decorators available today, it can be quite tricky separating the boys from the men and selecting the right tradesman for your unique project. There are a number of things to put into consideration, questions to ask and lots more to ensure your decorating job is awarded to the right tradesman. In this post, we’re going to give you an insight on some of the essential questions to ask to make sure the prospective decorator is a good match. Let’s take a look!

• What qualifications do you possess? With the pool of decorators around in the industry today, qualifications are needed to help you determine the true specialists. A qualified decorator gives you an assurance (to some extent) that a quality work would be done to your requirements. Decorators, generally, can earn a degree which includes course work in architecture and are also licensed.
• How do you help me identify and communicate my style to you? If you have an idea and know what you want for your space, a good decorator should be able to get it out of you by showing you pictures and asking questions which can vary widely.
• Do you have examples of previous work that are similar to my project in style, scope as well as budget? A decorator that answers yes to this question is a good indicator that they can handle your project. If they don’t, you can ask for pictures of projects they feel is quite similar to yours

If you happen to possess a upvc door, then you’re likely to notice two main things about about it. Firstly, it’s built to last and will most likely work perfectly well for several more years to come. Lastly, after just a couple of years, it’ll start showing signs of ageing - it starts to fade and becomes dull or discolour which is a problem that’s commonly identified with white plastic after some time and even more so when exposed to the sun and rain year in year out. Unlike back in the days where you’d have to replace your old upvc door due to discolouration, now you’d only have to repaint it which will only cost just a fraction of the price that would have been expended to get a replacement upvc door. By painting your upvc door, you’ll have it looking its best again while also adding to the curb appeal of your home.

Now painting of a upvc door is a very tricky and dangerous affair as it requires a lot of practice and any if proper care is not taken, you can easily inject yourself with paint. As a result, if you lack the skill or confidence required to carry out this task, then we’d strongly recommend you get in touch with a professional who can guarantee the best results the first time. If you wish to paint your upvc door, here are the four simple steps to it:

1. Remove any door furniture
2. Prepare the upvc door for the painting
3. Select a paint that’ll work on upvc doors
4. Decide on the finishing touches

How To Prepare Exterior Walls For Painting?

For a great and smooth exterior finish, preparing the walls before painting is crucial. A great painting job melts the heart and even more so if its done by you. This is a relatively easy task that can be completed without much hassle by an expert DIYer. However if you lack the needed confidence to pull off your exterior wall painting preparation task, then hiring the services of a reliable professional who can guarantee the best result would be your best bet. In this step by step, we aim to take you through the steps involved in preparing exterior walls for painting.

Before you get started, you need to make sure you have the necessary tools in place. These includes a filler and filling knife, sandpaper, soap, sponge, wide paint brush, masking tape as well as drop sheets.

✓ Ensure a smooth surface with a filer and sanding. This includes removing and replacing any rotten or decaying timer, proper sanding as needed, scraping off of peeling areas with sanding and filling of cracking areas with the help of exterior grade filler. Once the above is completed, you can then proceed to filling any holes or cracks in your exterior surface with a top quality exterior filler ( the application should be done with a putty knife).

✓ Cleaning. With the help of a quality and soft brush, clear out the dirt and cobwebs on the exterior’s surface. Then wash the walls with a good detergent to remove any remaining dirt and grease. You can use a bristled brush and a high pressure cleaner to make the process easier.

✓ Mask the area. This involves using a top quality masking tape along the edges you do not wish to paint and pushing the tape’s edges down firmly in such a way to get straight edges.

This will depend on your property, but commonly painted areas include rendered walls, guttering, soffits and fascias, and window frames. Generally you can paint what you want but on older or listed buildings, you may be restricted. An experienced painter will tell you what is possible.

How To Prep Walls For Painting

This is exactly the part of a wall painting job that can make or mar the whole project. To ensure that your paint project doesn’t end up being disastrous, the most important place to start is from room preparation which includes cleaning, sanding as well as priming the walls before painting. Not every wall will require to go through all the preparation steps as all walls are unique and some are in better conditions than others. However, it’s advisable to thoroughly inspect the surfaces before you proceed to painting and take the necessary actions where required.

This is a very simple DIY job that should be completed in little time, however it’s also perhaps the most important step of the entire painting project. Hence, if you lack the confidence to pull this off, then we’d recommend employing a painting expert who can guarantee the best results for help. In this guide, we’ll should you how you can prepare your wall for painting.

✓ Cleaning. There is no single best way to properly clean a wall, but most walls will be just fine with a sponge and warm water. For walls that have been stained with oil or grime such as kitchen walls, you can apply grease cutting detergent and water mixture to wash and follow up with warm water to clean the residues and a damp cloth wiping to finish it off. Then leave to dry off properly.

✓ Remove mildrew. Wipe out mildrew using a sponge and solution that’s three to four parts water to one part bleach. Apply this solution and scrub the affected surface with a soft brush.

✓ Sanding. This step is only meant for walls with rough spots on its surface. Dull the uneven spots with a sandpaper, wipe away the dust and leave to dry. Use a fine grit sandpaper to sand the surfaces and let it dry properly.

✓ Priming. Prime the wall to get the most out of your paint. They work to disguise imperfections and create a smooth surface on which you can work on.

How To Paint A Radiator

First thing you should know about painting a radiator is that normal paints can’t be used to do the job, however that doesn’t mean it’s not cheap, easy and fun - it definitely is and even more so, when you do it the right way. With a few radiator painting hints here, it’s only a matter of time before you start painting your radiators every colour of the rainbow delightfully.

Painting a radiator is not one of the most common tasks on most people’s to do list, so we’ve created this article as an encouraging nudge to allow more people let their creativity manifest through a brush. However, this is not to say that this is a task for everyone though as you won’t like to make a mess of your radiator. If you know you can’t pick up a brush or bend a knee or your back here and there, then you probably shouldn’t. In such cases, hiring a professional painter would be your best bet to get the best results while also saving yourself some time and money.

To paint a radiator, you’ll need a paint brush, suitable radiator paint, dust sheet and a radiator paint brush (optional).

✓ Turn off the radiator and leave it to cool off. Once it’s cold, simply wipe out all dust, dirt or grease from the radiator.

✓ Protect the flooring under the radiator from any paint splatter with a by spreading out a dust cloth.

✓ Use a suitable radiator paint to brush out well and lay off evenly in a direction. Leave it to dry overnight. Then apply paint on the radiator in direction of the grooves with the help of a top quality brush.

✓ Paint in sections and move across the radiator slightly overlapping until you get to the end. The move to paint the other areas.

✓ Leave the paint to dry as instructed in the manufacturer’s instructions, then apply a second coat if necessary.

In most areas, you will not need planning permission. However, if the property is listed or in a conservation area, you will need listed building consent or planning permission to paint the exterior. A surveyor or architect's advice will be invaluable as they can help with this process.

If you’re thinking about spraying your upvc, then one of the first things that naturally comes to mind is the price of completing such a task. If you’re also interested in determining the price, then you’ve come to the right place! In this post, we’re going to take a look at the total cost involved in UPVC spraying.

First and foremost, it must be stated that UPVC spraying is an industry that’s highly competitive. And as you would have guessed the prices are largely influenced the experience and reputation of the company you opt for. In other words, the new entrant companies are usually the cheapest but their works are not particularly the best. Therefore, for a high quality job, it’s always recommended to make use of a well established and highly reputable company in the industry.

If you’re going to hire a vastly experienced and reputable firm in the industry, then you should budget about circa £140 to £160 per window, circa £210 to £250 per door and frame, circa £260 to £300 for a large garage door and circa £600 to £800 for a three bed semi detached house.

These prices include materials, labour as well as other related costs. However, you should note that they’re only estimated prices and you’ll have to call in a professional in order to get a more accurate quote. If you’re looking to paint all the UPVC in your home, there are usually discounts that will be provided based on the work load. What’s more? If there’s a need for scaffolding, then there can be a bump up in the price.