Find a Decorator you can trust in Ashington.

Hiring a decorator for your project always seem easy until you get started. With a wide range of decorators available today, it can be quite tricky separating the boys from the men and selecting the right tradesman for your unique project. There are a number of things to put into consideration, questions to ask and lots more to ensure your decorating job is awarded to the right tradesman. In this post, we’re going to give you an insight on some of the essential questions to ask to make sure the prospective decorator is a good match. Let’s take a look!

• What qualifications do you possess? With the pool of decorators around in the industry today, qualifications are needed to help you determine the true specialists. A qualified decorator gives you an assurance (to some extent) that a quality work would be done to your requirements. Decorators, generally, can earn a degree which includes course work in architecture and are also licensed.
• How do you help me identify and communicate my style to you? If you have an idea and know what you want for your space, a good decorator should be able to get it out of you by showing you pictures and asking questions which can vary widely.
• Do you have examples of previous work that are similar to my project in style, scope as well as budget? A decorator that answers yes to this question is a good indicator that they can handle your project. If they don’t, you can ask for pictures of projects they feel is quite similar to yours

Interior painters and decorators will offer a wide range of services. These range from painting and wallpapering to other decorating jobs such as fitting skirting or architrave. Some painters and decorators will be trained to plaster as well, however, you should always ask them about this and not assume they will all be able to.

How To Remove Flaking Paint From Exterior Walls

For a successful exterior wall painting project, all that’s required is the right painting tools and equipments, the appropriate exterior paint as well as the necessary preparation of the surface. With the later being perhaps the most important part of the project which is likely to take your time and effort as there’s no short cut to it. But once you have a good idea on how to prepare the exterior wall’s surfaces, the painting of the exterior of your house becomes a lot easier. And a good example of this, is the process of removing the flaking paint on the surface. Fortunately, you do not require the skills of an expert to be able to remove the flaking paint from your exterior walls. So let’s take a look at how you can remove flaking paint from your exterior walls with relative ease.

✓ Clear all flaking or peeling paint. This involves scraping the entire painted surface with a scraper to remove all loose paints. For the paints that wouldn’t yield easily, you can apply extra pressure to wipe it out. However, it’s important to be careful while doing this to avoid gouging out or damaging the surface.

✓ Use coarse sandpaper. Make use of a sandpaper to sand all the exterior wall’s surfaces until they’re smooth. When you get to tight spaces and trim, you can incorporate a sanding block to make your job easier and more effective. Note that a smoother surface will make for a better adhesion.

✓ Use an orbital or power sander. If the paint is peeling, you can scrape it off perfectly with the help of a power sander. This will help you in achieving a smooth surface on inaccessible edges and more.

The quick and simple answer to this question is yes, you can definitely spray upvc window with a different colour. In fact, this represents a much more cost effective mean of changing the upvc windows colour. Back in the days people used to simply replace their upvc windows, doors, fascias, gutters, garage door conservatories and the likes which is actually a much costlier option.

Generally, upvc window frames are known to have a lengthy lifespan, however the common misconception is that the colour you pick originally and install is the colour you’d have to keep till you have them replaced. Typically, people will have white upvc windows, however in recent times there has been more colours coming on in the market such as anthracite grey, black, brown and many more when it comes to replacing. However, replacing your upvc window frames come with a greater associated expenses, building works, a lot of hassle as well as mess. As a result, there has been a significant increase in the number of people looking for upvc painting and recoloring as this costs a lot less than replacing existing frames up to 80% in several cases. From the savings that’ll be made by spraying and painting upvc window frames, it makes absolutely little sense replacing the frames. Therefore, it’s highly recommended to have your upvc windows sprayed and painted by an experienced professional who can guarantee the best results the first time.

How To Prep Walls For Painting

This is exactly the part of a wall painting job that can make or mar the whole project. To ensure that your paint project doesn’t end up being disastrous, the most important place to start is from room preparation which includes cleaning, sanding as well as priming the walls before painting. Not every wall will require to go through all the preparation steps as all walls are unique and some are in better conditions than others. However, it’s advisable to thoroughly inspect the surfaces before you proceed to painting and take the necessary actions where required.

This is a very simple DIY job that should be completed in little time, however it’s also perhaps the most important step of the entire painting project. Hence, if you lack the confidence to pull this off, then we’d recommend employing a painting expert who can guarantee the best results for help. In this guide, we’ll should you how you can prepare your wall for painting.

✓ Cleaning. There is no single best way to properly clean a wall, but most walls will be just fine with a sponge and warm water. For walls that have been stained with oil or grime such as kitchen walls, you can apply grease cutting detergent and water mixture to wash and follow up with warm water to clean the residues and a damp cloth wiping to finish it off. Then leave to dry off properly.

✓ Remove mildrew. Wipe out mildrew using a sponge and solution that’s three to four parts water to one part bleach. Apply this solution and scrub the affected surface with a soft brush.

✓ Sanding. This step is only meant for walls with rough spots on its surface. Dull the uneven spots with a sandpaper, wipe away the dust and leave to dry. Use a fine grit sandpaper to sand the surfaces and let it dry properly.

✓ Priming. Prime the wall to get the most out of your paint. They work to disguise imperfections and create a smooth surface on which you can work on.

How To Paint Exterior Window Sills And Frames?

Painting your exterior window sills and frames can be a very joyful and fun-filled activity if you know what you’re doing. It’s a task that can be completed in little time by an experienced DIYer, however if you do not have the confidence to pull off this project, then you’d be better off calling in a professional for help to avoid costly mistakes. In this guide, we’ll take you through the exterior window sills and frames painting process.

✓ Prepare the window sills and frames. This includes, brushing the surfaces with warm water and gentle soap, scrubbing the windows to ensure all the edges and cracks are free from all forms of dirt, rinsing it with water and use a soft, clean cloth to wipe off any excess liquid and finally, drying it off with a towel or leaving it to dry off by itself before you start to paint.

✓ Remove any signs of moulds and moss, fill in the cracks between frame and glass using a multi-purpose filler, sand the frame and wipe out any dirt or dust on or around it using a vacuum cleaner, a clean cloth or soft brush. Once done, you can then apply a coat of water-based primer and let it dry off before painting.

✓ Painting. Firstly, you’ll have to sand your primed windows to make an even, smooth surface and apply an undercoat evenly to the surface. Once completed, you can then apply at least 2 coats of paint using a quality brush. Make sure you sand the first layer carefully before you apply the second to get a great finish.

✓ Once dried, you can the finish with a top coat (make sure you go for a weather proof paint for the exterior). For the window sills, you’ll have to apply the exterior paint gently with masking tape around the edges to protect the walls from the dripping paint.

What Kind Of Paint To Use On Exterior Brick?

If you’re thinking about painting your exterior brick, you’d probably be wondering the kind of paint that’ll be most suitable for the project. If yes, you’re definitely not alone! Bricks are widely known for being notoriously difficult to paint due to their porousness and can also absorb paint. However, if you’re able to purchase the right type of paint and carefully prepare for your home’s brick exterior, you can make the process a whole lot more easier and cleaner while also giving your home a lot more updated look. It’s usually cheap, appealing and even protects your bricks from the elements which makes it even more durable.

The best type of paint to purchase is the elastomeric paint which provides the highest level of longevity. It’s actually more expensive than acrylic paint but it clearly outworks 100% acrylic paint by double in terms of both effectiveness and efficiency. The elastomeric paint is also super resistant to cold, heat as well as sunlight which makes it perfect for outdoor application. What’s more? It’s also dense enough to fill in cracks in the bricks but in such cases you might need to apply two coats. Overall, if you happen to stay in an inclement weather prone region, an elastomeric paint will help protect your home’s brick surface.

However, if you’re on a tight budget you can also consider getting an acrylic latex paint. This is a lot cheaper than elastomeric paint, but it’s also a great painting option for exterior bricks as it permits moisture to leave the bricks’ surface and helps to prevent mildew. Furthermore, you’ll only need to apply just a coat of acrylic paint.

You should always wait until plaster is dry before painting. The time this will take varies depending on the room and property, but in general, it will take about a week. Your plasterer will tell you how long it is best to leave it before covering or painting their work.