Find a Decorator you can trust in Oakham.

Hiring a decorator for your project always seem easy until you get started. With a wide range of decorators available today, it can be quite tricky separating the boys from the men and selecting the right tradesman for your unique project. There are a number of things to put into consideration, questions to ask and lots more to ensure your decorating job is awarded to the right tradesman. In this post, we’re going to give you an insight on some of the essential questions to ask to make sure the prospective decorator is a good match. Let’s take a look!

• What qualifications do you possess? With the pool of decorators around in the industry today, qualifications are needed to help you determine the true specialists. A qualified decorator gives you an assurance (to some extent) that a quality work would be done to your requirements. Decorators, generally, can earn a degree which includes course work in architecture and are also licensed.
• How do you help me identify and communicate my style to you? If you have an idea and know what you want for your space, a good decorator should be able to get it out of you by showing you pictures and asking questions which can vary widely.
• Do you have examples of previous work that are similar to my project in style, scope as well as budget? A decorator that answers yes to this question is a good indicator that they can handle your project. If they don’t, you can ask for pictures of projects they feel is quite similar to yours

If you’re thinking about spraying your upvc, then one of the first things that naturally comes to mind is the price of completing such a task. If you’re also interested in determining the price, then you’ve come to the right place! In this post, we’re going to take a look at the total cost involved in UPVC spraying.

First and foremost, it must be stated that UPVC spraying is an industry that’s highly competitive. And as you would have guessed the prices are largely influenced the experience and reputation of the company you opt for. In other words, the new entrant companies are usually the cheapest but their works are not particularly the best. Therefore, for a high quality job, it’s always recommended to make use of a well established and highly reputable company in the industry.

If you’re going to hire a vastly experienced and reputable firm in the industry, then you should budget about circa £140 to £160 per window, circa £210 to £250 per door and frame, circa £260 to £300 for a large garage door and circa £600 to £800 for a three bed semi detached house.

These prices include materials, labour as well as other related costs. However, you should note that they’re only estimated prices and you’ll have to call in a professional in order to get a more accurate quote. If you’re looking to paint all the UPVC in your home, there are usually discounts that will be provided based on the work load. What’s more? If there’s a need for scaffolding, then there can be a bump up in the price.

There are lots of paints that are suitable for different areas of your property. In general, gloss and eggshell paints should be used in high traffic areas, whereas matte paints are suitable for lower traffic areas. Professional painters and decorators can give you advice on the most suitable types of paints.

What Kind Of Paint To Use On Exterior Brick?

If you’re thinking about painting your exterior brick, you’d probably be wondering the kind of paint that’ll be most suitable for the project. If yes, you’re definitely not alone! Bricks are widely known for being notoriously difficult to paint due to their porousness and can also absorb paint. However, if you’re able to purchase the right type of paint and carefully prepare for your home’s brick exterior, you can make the process a whole lot more easier and cleaner while also giving your home a lot more updated look. It’s usually cheap, appealing and even protects your bricks from the elements which makes it even more durable.

The best type of paint to purchase is the elastomeric paint which provides the highest level of longevity. It’s actually more expensive than acrylic paint but it clearly outworks 100% acrylic paint by double in terms of both effectiveness and efficiency. The elastomeric paint is also super resistant to cold, heat as well as sunlight which makes it perfect for outdoor application. What’s more? It’s also dense enough to fill in cracks in the bricks but in such cases you might need to apply two coats. Overall, if you happen to stay in an inclement weather prone region, an elastomeric paint will help protect your home’s brick surface.

However, if you’re on a tight budget you can also consider getting an acrylic latex paint. This is a lot cheaper than elastomeric paint, but it’s also a great painting option for exterior bricks as it permits moisture to leave the bricks’ surface and helps to prevent mildew. Furthermore, you’ll only need to apply just a coat of acrylic paint.

How To Prep Walls For Painting

This is exactly the part of a wall painting job that can make or mar the whole project. To ensure that your paint project doesn’t end up being disastrous, the most important place to start is from room preparation which includes cleaning, sanding as well as priming the walls before painting. Not every wall will require to go through all the preparation steps as all walls are unique and some are in better conditions than others. However, it’s advisable to thoroughly inspect the surfaces before you proceed to painting and take the necessary actions where required.

This is a very simple DIY job that should be completed in little time, however it’s also perhaps the most important step of the entire painting project. Hence, if you lack the confidence to pull this off, then we’d recommend employing a painting expert who can guarantee the best results for help. In this guide, we’ll should you how you can prepare your wall for painting.

✓ Cleaning. There is no single best way to properly clean a wall, but most walls will be just fine with a sponge and warm water. For walls that have been stained with oil or grime such as kitchen walls, you can apply grease cutting detergent and water mixture to wash and follow up with warm water to clean the residues and a damp cloth wiping to finish it off. Then leave to dry off properly.

✓ Remove mildrew. Wipe out mildrew using a sponge and solution that’s three to four parts water to one part bleach. Apply this solution and scrub the affected surface with a soft brush.

✓ Sanding. This step is only meant for walls with rough spots on its surface. Dull the uneven spots with a sandpaper, wipe away the dust and leave to dry. Use a fine grit sandpaper to sand the surfaces and let it dry properly.

✓ Priming. Prime the wall to get the most out of your paint. They work to disguise imperfections and create a smooth surface on which you can work on.

How To Paint A Room

Painting is a joyful task and it’s quite obvious why it’s one of the most popular DIY projects. Whether you’re painting as an experienced DIYer or as a newbie, this step by step guide will put you in the right direction. However, if you lack the confidence to carry out this task, then we’d recommend you get in touch with a seasoned professional who can guarantee the best results for help. This way, you get to save some time and additional money that would have resulted from possible costly errors.

So just before you head right into the task, there’s the need to determine the type of pain finish you would love to use which is to choose a colour. Now let’s get started!

• Prepare the room

✓ Remove all objects as much as you can from the room and cover the remaining furniture or objects with a sheet.

✓ Fill all holes on the surface to make for an even finish.

✓ Wash the wall with the help of a damp sponge. A sugar soap or diluted washing up liquid will work just fine.

✓ Tape the edges of objects you do not wish to paint like light switches, plug sockets and the likes.

• This step can be skipped if painting on an existing paint, but it’ll advisable to dilute small quantity of your selected paint to patch prime the holes that you’ve filled. If you have a large number of holes that was filled, then priming them would be smart.

• Mix or stir the paint thoroughly in a paint kettle to ensure an even and perfect mix.

• Now you’re ready to start painting! Start from the edges to form like a frame to work within with your roller. Once done, leave for about 4 to 6 hours to dry.

• For the second coat, simply repeat the above step to complete your painting project.

Over the years, UPVC spray painting has grown to become a standard practice. Previously, what was done when people wanted to change the colour of their UPVC window is simply to replace the old ones. However compared to the cost of replacing the units, it’s actually a lot easier to simply have your UPVC windows sprayed and even more importantly, at just a fraction of the replacement cost. If you’re thinking about spraying your upvc windows, then you’ve come to the right place! In this post, we’re going to take you through the entire process. However, if you lack the confidence needed to pull this off, we’d strong advise that you get in touch with a professional to avoid make costly errors or mistakes.

The first step to successful upvc window spraying is always to make sure that the upvc is properly cleaned by removing any loose dirt and residue, getting rid of any muck and grime which has developed over the years. You can also abrade the surface in a very light manner to leave upvc frames with a key to make the paint adhesions stronger. Once you’re done with the preparation, the obvious next step is masking off. This process requires you to protect the walls, glass, floors and brickwork from any potential over spray. To achieve this, you can make use of masking papers.

Upon completion of the masking off process, then its time to spray paint the upvc windows using a spray gun and spray painter. This requires a lot of practice as it could be very dangerous as you can inject yourself with paint, which can be seriously fatal.

This will depend on your property, but commonly painted areas include rendered walls, guttering, soffits and fascias, and window frames. Generally you can paint what you want but on older or listed buildings, you may be restricted. An experienced painter will tell you what is possible.