Find a Door Fitter you can trust in Ardrossan.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

Do you have a composite door and wondering the best type of lock that can be used on your prized asset. To choose the right type of lock for a composite door, it’s of utmost importance to select one that’s designed to work perfectly with the composite configuration. By doing this, you’ll improve the security of your home while also achieving the desired look. To secure a composite door, the most common way is by incorporating a high security multipoint lock. Therefore, depending on the look you want for your door as well as how you want it to function, here are the four types of locks you can consider to go with your composite door.

• Split Spindle Lock

A split spindle lock would be your best bet if you’d like to automatically prevent access to your home from the outside. This lock allows you to open your door smoothly by utilizing the inside handle, however, you’ll need a key to turn the latch bolt to gain access back inside.

• Lever or Lever Lock

If you want an unhindered access in and out of your property, a lever lock gives you this opportunity without the need for a key until it’s totally deadlocked. The lever lock is installed to the back door which makes unauthorized entry even less likely.

• Slam Lock

If you’d prefer a super fast locking, then this lock type is your answer! It automatically triggers the lock hooks immediately you close the door - without having to lift the handle. However, to gain access to the inside of your home or bolt the door from the inside, you’ll need a key.

• Key Wind-Up Lock

This lock is wholly key operated and totally handle-free. Immediately the door is closed, the latch bolt will be automatically activated, ensuring that a key would be needed to gain access back inside.

How To Install Bifold Doors

If you’re looking to install a bifold door in your home or property, then you’re at the right place! In reality some jobs are better left to the professionals and one of such jobs is bifold door installation especially if you lack proper training and experience that’ll guarantee the best result the first time. If otherwise, hiring a professional installer will do you lots of good like saving you time and extra money that could result from costly errors. In this step by step guide, we’ll take you through the bifold doors installation process.

The first step to take when it comes to bifold door installation is to take the measurement of the door opening and get a kit in the appropriate size. For a better accuracy, do note that the combined measurement of both doors should be about an inch less than the opening’s total width while also being two inches less than the door frame’s height.

• Install the top rails in such a way that the rail’s end makes contact with the door frame’s side using the screws.

• Fit the bottom rail in the same fashion as the top ensuring the rail’s end makes contact with the same side of the door frame.

• Insert dowels into the predrilled holes in the door panels’ top.

• Place the dowel with the adjustment screw near the bottom’s side wall. While placing the fixed dowels in the door panel’s top and bottom on the side farthest away from the hinge. Once done, put the dowel and spring assembly into the door panel’s top, closest to the side wall.

• Fit the door panels into rail’s top and bottom while also adjusting the screws to centre the doors.

• Ensure the doors open and close like they should. If positive, tighten all hardware and fit the pulls or knobs of the door.

Is your garage door a bit old and outdated? Are you planning to make some renovations? Or perhaps you just want a newer and more stylish garage door, that’s safer and easier to operate, installed. Fitting a garage door can be a bit tricky but it’s not as difficult as you might think. If you’re without proper training or experience, it’s advisable to get in touch with a reliable professional for help in order to guarantee the best results while also saving you both time and money. This guide offers you step by step instructions to assist you in the installation of a new door on our garage.

To get started, the obvious first step is to remove the old garage door. Carefully go through the manufacturer’s instructions to achieve this. Here, you’d basically have to unlatch the door, take apart the door’s panel and unscrew the tracks.

lMeasure, Fit The Hinges & Handles

• Take a measurement of the area in which the door will be fitted

• From the top of opening to ceiling should include a space of about 10 to 12.

• For the length of the garage, you should have the door’s height with about 18 or more space.

• Once done, attach stops to the sides of the opening

• Lay out the bottom piece of the door and include the weather stripping (if you deem fit) using the sawhorses.

lPut The Bottom Piece In Position

• Fit the bottom piece into door frame using a level

• Hit nails partway into each jamb

• Bend the nails slight to secure their position.

• Assemble the vertical, curved and horizontal pieces of the track using the manufacturer’s instruction

lFit The Remaining Panels

• Put the second panel on the first panel

• Use a hammer to hit nails into it

• Fit the hinges.

• Repeat the process for the number of panels required and achor individual piece into the door jamb.

lInstall Rollers

• Fit the rollers in the section’s supports

• Put the rollers in the assembled track and make sure they’re not pressed to tightly against the track to prevent friction.

lSecure Tracks & Fit The Springs

• Fit the curved and horizontal pieces

• Assemble the springs following the manufacturer’s instructions

• Ensure that the tracks are level and parallel by lifting the door to about half length

• Lift the door to cover the distance left and fit the springs to the pulley system

Composite front doors offer a wide range of benefits which includes numerous style and colour options, increased security, personalization options, durability as well as low maintenance requirements. However, with so many options available in the market, it’s also expected that the prices would vary greatly depending on many factors. These factors include the colour, style of the composite door, glazing option, door furniture as well as security locks.

• Colour - More popular and basic colours like white, blue and brown black are manufactured in mass, making them a bit lesser than the unusual colours as they usually go through an expensive colour mixing process.

• Style Of The Door - The most common and popular door styles are manufactured in large quantities and consequently, the cheaper option than the more complex styles. A good example is the six panel door that features two frosted glass inlays will definitely cost more than the four panel plain white composite door.

• Glazing Option - The glass type, design and panel size all play a huge role in determining the price. The more complex your glazing option is, the more money you’ll have to pay.

• Door Furniture - Several composite doors come with bespoke handles, letterplates and knockers to achieve your desired finish. The furniture additions on door can also play a huge role in influencing the overall cost of your composite door.

• Security Locks - Multi point locks typically comes as a standard. However, you might need to determine the type required by your as the quality and type can vary considerably.

Generally, to have a basic style composite door installed, you’ll have spend about £850 and above. And depending on the design requirements and glazing features you select, this price can increase significantly.

While some people may see bifold doors as insecure, many bifold doors feature advanced security measures. Internally beaded strengthened double glazing is very secure. Choose a bifold door with a multi-point locking system for enhanced security. If your house is empty for long periods, always consider a blind solution to keep prying eyes out of your home.

When you think about installing an electric garage door, one thing that naturally comes to mind is that purchasing and fitting of an electric garage door would be an expensive luxury. Having a garage door controlled by a remote control will probably cost too much, right? Well, contrary to many beliefs, the average cost of an electric garage door in the UK isn’t as expensive or pricey as you would have earlier imagined it to be. Of course, the price of your new electric garage door depends on a wide variety of factors such as the type of garage you possess, its aperture, construction as well as the type of electric garage door you seek.

Electric garage door aren’t that expensive considering the protection and convenience they provide, making them a viable option that should be considered for your garage. In the UK, a steel up-and-over single garage door price ranges around £700 to £900 plus £150 to £250 installation fee. Whereas, a costly single timber, trackless overlap door can cost as much as £4,200 to £5000 with about £400 to £700 installation price. A double garage door will usually cost double the price to purchase with just a little increase in the cost of the fittings.

The convenience provided in using an electric garage door is one of the main reasons why most people would prefer fitting it in their house. Just the thought of arriving home and driving through the wall of your garage with just a click of a button and without having to leave the comfort of your vehicle can be very appealing. And also with a click of a button you can keep your garage safe and secure from any potential danger. At the end of the day, the convenience and other benefits that comes with an electric garage door largely outweighs the price involved.