Find a Door Fitter you can trust in Fulham.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

What Is Better, Steel Or Aluminium For A Front Door?

If you’re extending or refurbishing your home or property or constructing a new one, you’ll, sooner or later, get to the point when you’d have to determine the type of door material you want to use. The most common choices include steel, aluminium, wood and PVC. However, in this article we’ll only be looking at steel and aluminium to discuss which is better for a front door. Let’s take a look!

✓ Home security. Intruders and unwanted visitors are always a concern regardless of where you live. If this is your biggest concern when going for a front door then steel doors are your best bet as they happen to be one of the sturdiest and strongest materials that can be used to manufacture a door. Not only do they not crack or warp, but they also offer some high security models that features a large number of locks as well as hinges with various style designs. However, this does not mean aluminium are left behind on this subject either as there are also some high security doors that uses aluminium as the primary metal component.

✓ Thermal insulations. Both door presentations are not completely made of steel or aluminium. For a better insulation, they’ll feature other materials such as foam,wood, polystryene foam, or fibreglass core to prevent the escape of heat. As a result, both doors can do a great job when it comes to thermal insulation like keeping your house cool in the summer and warm in the winter for a better energy efficiency.

✓ Aesthetics. If this is your primary criteria for a front door, then aluminium has a wide range of colours and styles to match the style of your home.

There are several benefits that can be derived from insulating your garage door. Not only can it reduce your energy bills and protect your garage’s content from elements, but can also go a long way to increase the return on your property’s value, reduce noise, increase the garage door’s strength and deliver a more convenient garage and home. Insulating your garage is a task you can actually take on by yourself. However, if you lack proper training or experience, we’d recommend you leave it for a reliable professional who can ensure the project is done right, the first time - saving you both time and money. This guide will give you a good insight on how you can go about the project.

To insulate your garage, you’ll need a fibreglass insulation, garage door insulation, expanding foam, drywall, gloves and long sleeves, wood, sharp utility knife as well as a staple gun and staples. Now let’s take a look at the garage door insulation process!

lClear The Walls

• Remove the drywall (if present)

• Clean out the dirt and stud cavities.

• Wipe out any chemicals in the garage like gasoline.

lIdentify Gaps & Cracks In The Wall

• Shake your expanding foam vigorously for about a minute.

• Attach the straw to the can and use it to spray the wall openings.

• Fill the gaps until its 50% full

• Leave the foam to fill the openings completely in about 5 to 15 minutes. It should be hardened or completely cured within 6 to 8 hours.

lInstall Fibreglass Insulation

• Staple the insulation’s paper face to the side of the stud and not the face.

• Place a piece of wwod on the insulation’s top to act as a guide to properly cut the insulation to size.

• Cut the excess insulation with a utility knife.

• Tuck in the insulation to make for easier stapling.

• Staple the insulation down to the stud’s side.

lUse Drywall To Cover The Insulation

• Screw and glue the drywall to the stud.

• Do not leave the insulation’s paper exposed.

How To Install Bifold Doors

If you’re looking to install a bifold door in your home or property, then you’re at the right place! In reality some jobs are better left to the professionals and one of such jobs is bifold door installation especially if you lack proper training and experience that’ll guarantee the best result the first time. If otherwise, hiring a professional installer will do you lots of good like saving you time and extra money that could result from costly errors. In this step by step guide, we’ll take you through the bifold doors installation process.

The first step to take when it comes to bifold door installation is to take the measurement of the door opening and get a kit in the appropriate size. For a better accuracy, do note that the combined measurement of both doors should be about an inch less than the opening’s total width while also being two inches less than the door frame’s height.

• Install the top rails in such a way that the rail’s end makes contact with the door frame’s side using the screws.

• Fit the bottom rail in the same fashion as the top ensuring the rail’s end makes contact with the same side of the door frame.

• Insert dowels into the predrilled holes in the door panels’ top.

• Place the dowel with the adjustment screw near the bottom’s side wall. While placing the fixed dowels in the door panel’s top and bottom on the side farthest away from the hinge. Once done, put the dowel and spring assembly into the door panel’s top, closest to the side wall.

• Fit the door panels into rail’s top and bottom while also adjusting the screws to centre the doors.

• Ensure the doors open and close like they should. If positive, tighten all hardware and fit the pulls or knobs of the door.

Do Bifold Doors Open In Or Out?

If you’re considering getting bifold doors, then you’d probably want to know if it’s going to open inwards or outwards. The answer to the question is both, it can open inwards or outwards. Generally bifold doors are configured with flexibility in mind. They’re designed in such a way that allows them to be opened inwards or outwards depending on your preference or what best suits the space on which they will be installed. As a result, when you’re considering the installation of new bifolding doors in your home or property, one of the things you’ll have to take into account is whether you want your bifold doors to open inwards or outwards. Below are a couple of tips that’ll help you make the best decision as to whether your bifold doors should open inwards or outwards.

• Where you’re going to fit your bifold doors can play a huge role in determining whether they’ll open inwards or outwards. For instance, if they’re going to be fitted in your dining room, the furniture you have there will determine if there’s enough space to accommodate them inside or otherwise.

• The frequency of use will also be an influencing factor. If the door is frequently used, then a bifold door set with a traffic door which opens outwards will be more convenient for heavy daily use.

• The size of your outdoor space. Is your outdoor space restricted by your patio’s size, the decking area or garden? If yes, the opening inwards would be the best option. So also if your door opens straight out onto a pathway, you might want to make the bifold doors open inwards as well so as not to block the path.

This is a very sensible question to ask especially before making any decision. However, the answer is not always straightforward without conducting a proper survey of the site in question. In a stark contrast to many beliefs, a “standard garage door does not exist. And as a result of the great variety in specifications, there’s usually a need for garage door to be made to order.

Roller garage door are gradually becoming more and more accepted by homeowners across the country and reasonably so. The fact is, they’re the only type of garage door that features an electric motor as a standard rather than an optional extra. Therefore, if you’re considering the installation of a new garage door and wish to know more about the cost of getting a roller garage door, we’ve got you fully covered!

One thing you should take note is that the prices can vary due to garage door manufactures, price increases as well as the size and type of the garage door you want installed. However, here are the mostly likely price ( including both VAT and installation) you’ll pay to get a roller garage door in the UK.

• For an insulated roller garage door with a single garage door size, the price will range between £1099 to £1800.

• For an insulated garage door with a double garage door size, the price will range between £1400 to £3000.

• For an electric and insulated roller shutter garage door with a single garage door size, the price ( without VAT & installation) will range between £250 to £300.

• For an electric and insulated roller shutter garage door with a double garage door size, the price ( without VAT & installation) will range between £350 to £400.

What Is The Most Secure Type Of Front Door?

When getting a new front door for your home or property, you’d probably want to get one that’ll provide the most security for your home. Gone are the days when you could leave your front door open and still come back to your assets intact, if you try that today, you’ll be taught a bitter lesson. The front door is the weak point of your home, the point at which several burglars will use to gain entrance into your home. Therefore, for your own peace of mind, there’s the need to get the most secure type of front door to protect both your loved ones and home.

There are two crucial thing to take into account when selecting the best front door for your home’s security and these includes both the door’s material as well as the lock. Let’s have a look at two of the best front doors for security purposes.

✓ Timber Doors. Though they might look great, but they’re also very sturdy and solid which makes them one the best front doors for security. Timber is a heavy hardwood door that’s at least 44mm thick. However, just like any other door type, the strength still boils down to the frame as well as quality of the lock. If the timber door possesses a superior style lock alongside a solid frame, only burglars or intruders with a leg to spare will try to forcefully kick it in. And neither can it be smashed open nor shoved with the shoulder.

✓ Composite Doors. These doors are developed to tackle the flaws of singular material doors and as a result, they possess great security qualities. They usually include a steel door frame and a solid hardwood internal frame. Furthermore, the door’s surface skin is typically made from glass-reinforced plastic which is a very sturdy material. Combination of all these materials enable this type of door to withstand brute force with relative ease. No intruder with a good knowledge of door materials will try to force an entry with a composite door standing as an obstacle.