Gas Boiler Repair & Servicing
Bristol - BS34
Enquiry from: Irfan A
Start Date: Immediate
Boiler and heating repair
Over 110 reviews & an average rating of 4.3/5 stars, you'll find the right pro
Get up to 4 quotes from local Heating Engineers near you
Bristol - BS34
Enquiry from: Irfan A
Start Date: Immediate
Boiler and heating repair
Bristol - BS37
Enquiry from: Judi G
Start Date: Immediate
Themo coupler fitted in a lpg heater
Bristol - BS6
Enquiry from: Luke W
Start Date: Immediate
Quote requested on domestic biomass heating system, to be supplied and fitted
Caldicot - NP26
Enquiry from: Carol W
Start Date: Immediate
Call back anytime
Bath - BA1
Enquiry from: Daniel B
Start Date: Immediate
Provide new combi boiler to kitchen
Bath - BA1
Enquiry from: Clive B
Start Date: Immediate
Boiler first service traditional boiler low pressure
Bristol - BS10
Enquiry from: David T
Start Date: Immediate
Submit your free quote for rated tradespeople
Bristol - BS34
Enquiry from: Lidia H
Start Date: Immediate
Remove old Baxi boiler and replenish with nie electric fire
Bristol - BS6
Enquiry from: Bill S
Start Date: Immediate
Repair to pump for heat exchange water
Bristol - BS31
Enquiry from: Michael H
Start Date: Immediate
Water heater in kitchen has stopped working pilot is lit but boiler does not ignite
Bristol - BS13
Enquiry from: David H
Start Date: Immediate
Submit your free quote for rated tradespeople
Bristol - BS34
Enquiry from: Christopher A
Start Date: Immediate
Submit your free quote for rated tradespeople
How much do Heating Engineers in Bristol charge?
Prices for Heating Engineers around Bristol can fluctuate depending upon the type of task that you need to have actually done in your home. It's the inquiry we are asked a lot "how much do Heating Engineers in Bristol charge?". It's always great to have an idea of how much a Heating Engineer are going to likely cost for their services. Prices are going to vary based upon the products and also the tradesman selected. The table reveals the kinds of task that Heating Engineers normally do and the average cost series of these jobs. Some tasks take longer to finish than others so prices do differ by task.
Jobs that Heating Engineers in Bristol can do:
| Heating Engineer job | Heating Engineer cost in 2026 |
|---|---|
| Combi boiler in Bristol | £1,730-£2,675 |
| Lpg boilers in Bristol | £2,320-£3,480 |
| Biomass boilers in Bristol | £7,500-£11,500 |
| New Oil boiler in Bristol | £2,250-£3,450 |
| Boiler repair and service in Bristol | £113-£173 |
| Electric heaters in Bristol | £1,500-£2,300 |
| Eco boiler (hhrco) in Bristol | £1,730-£2,675 |
| Boiler finance in Bristol | £1,730-£2,675 |
| Heating control system in Bristol | £225-£345 |
| Micro chp boiler in Bristol | £3,750-£5,750 |
| Oil boiler repairs & servicing in Bristol | £83-£127 |
| Gas works in Bristol | £60-£92 |
| Boiler cover in Bristol | £5-£25 |
| Commercial Gas Boiler in Bristol | £2,084-£4,100 |
If you get the right size boiler for your home and you get it serviced regularly, your boiler could last up to 15 years. It may even last longer than this, but you’ll find that your boiler begins to become less efficient as it gets older. Also, as technology improves, a boiler older than 15 years may not be the most efficient one on the market.
How To Get A Gas Fireplace Installed
A gas fireplace is one of the most popular means of adding warmth to homes which so many homeowners have now come to terms with, especially with natural gas prices being fairly low for an extended period of time. Properly installed gas fireplaces are not only capable of adding a much needed ambiance and warmth to your home, but also significantly more efficient than the traditional wood-burning fireplaces which mostly produces less heat from the large amount of drafts they consume. Meanwhile a good gas powered fireplace with a properly functioning blower, is very close to being as efficient as a furnace when warming up a room. What’s more? Gas fireplaces also possess a great visual appeal and are also very practical especially when they feature realistic ceramic logs as well as good gas burners.
Installing a gas fireplace by yourself is definitely up there as one of the most advanced DIY tasks you can attempt to try. If you lack proper training and experience, it’s advisable you leave the task to a reliable professional that’ll guarantee the best results while also ensuring costly errors are avoided. This guide will, however, put you in the right direction.
• Construct wall recess to accept the fireplace.
• Punch a hole through the exterior wall of the house to fit in stovepipe thimble.
• Fix a small part of the stovepipe to the exhaust port in the fireplace’s rear.
• Use construction adhesives on the wall around the fireplace opening’s sides and top.
• Apply granite slabs into the adhesive around the opening of the fireplace.
• Put the fireplace in position and ensure the stovepipe goes outdoors through the thimble.
• Use a termination hood to seal the exhaust pipe’s exterior.
• Employ the services of a professional plumber to connect the gas to the fireplace.
• Fit the removable front
• Test the functionality of the fireplace.
How Much Does It Cost To Move A Gas Meter?
When your gas meter is not in the right location while completing your renovation works or extending your property, it can be a worrying experience.
As a homeowner, you’re not allowed by the law to move your gas meter by yourself - it’s a very dangerous task that’s too risky to undertake just by watching a Youtube video or reading a blog post. Moving of a gas meter can and should only be carried out by a qualified and licensed gas supplier. And this, ultimately, gives rise to the question - how much does it cost to move a gas meter? Before we provide an answer for that, let’s look at what moving of a gas meter entails.
First and foremost, moving of a gas meter typically involves switching off the gas source to your home or property. The pipeline about 2 metres away from your property would be cut into for safety reasons and diverted into another position. Furthermore, you can as well apply that your meter should be re-fitted and re-linked to the inner copper pipeline, but that’s if the inner copper pipeline happens to be within two metres of the new location of your gas meter.
The time involved in the completion of a gas meter re-location project depends largely on the complexity of the job as each project is unique. Typically, the standard timescale from preparation to the final stage of moving a gas meter will take between 4 to 8 weeks. Finally, how much will it cost to relocate your gas meter?
As there are no government funds to subsidize gas meter relocation costs, this can be a very expensive work to carry out. Generally, the price to move a gas meter of about 5m will start within the range of £640 to £670.
The simple answer to this question is yes. The Google Nest thermostats are built in such way that makes it compatible with most 24V systems including the older systems. The device is functional with all common types of fuel such as electricity,natural gas as well as oil. However, before purchase it is vital to determine if your thermostat is also compatible. What’s more? The Nest thermostats is also designed to be usable even without the existence of a C wire (common wire) in your home, although a new C wire installation may be required.
Furthermore, Nest Learning Thermostat is compatible with multiple central heating system such as combi boiler systems, air source and ground source heat pumps (heating only) as well as heat only boiler. Now let’s take a look at the Nest thermostat compatibility!
• The majority of the 24 V systems ( including older systems) are compatible with Google Nest thermostat. They can be incorporated with each and every common types of fuel such as oil, natural gas as well as electricity.
• Prior to the installation of Google Nest thermostat, you can make use of the Google Home or Nest app for proper guidance and to notify you if your system is compatible. It will also give you a bespoke thermostat wiring guide.
• To check the compatibility of your system, you can also check with the Google’s online compatibility checker before purchase.
How To Install A Gas Cooktop In An Island
Are you thinking about installing a gas cooktop in your kitchen island? If yes, then you must know that there are clearance requirements that must be met (before you proceed) between the cut out and the countertop’s edge. Basically, there are incremental requirements for island installation due to the fact that it does not make an assumption that the product is going to be fitted against a rear wall that acts to protect the back of the unit. As a result, while doing an island install we must put the safety of the product into consideration much more that we do a standard install. What’s more? This island clearance requirement develops from a third-party agency and is a standard with all brands. So how do you install a gas cooktop in an island having the aforementioned requirements in mind?
• Use a foil tape to line the inside edges of the cut out. The function of this is to prevent heat damage as well as countertop’s discolouration. Put the cooktop top on a secured surface.
• Identify the pipe coming out of the cooktop’s side or bottom and brush onto the threads of the manifold entrance.
• Pass the pressure regulator onto the entrance of the manifold and make use of a wrench to tighten it.
• Brush the pipe joint compound onto one of the flare union adaptor’s threads and pass it into the regulator’s open end. Make it slightly tight with a full turn of the wrench.
• Connect the flare union adaptor’s open end with the flexible appliance connector hose, upon brushing on pipe joint compound.
• Put foam tape on the cooktop underside’s edges, if your cooktop comes with a glass burner plate.
• Turn the cooktop to set it into the cutout.
• Apply pipe-joint compound onto the flare union adaptor left and secure it firmly into the gas shutout valve.
• Connect the flexible hose connector’s free end with the flare union adaptor.
When it comes to gas boilers, this is one of the most frequent questions that always pops up and for a good reason. When you invest a considerable amount of money to acquire and install a gas boiler in your business property, it’s only reasonable not only to expect the boiler to warm up your property efficiently, but also to do so for a long period of time. If you’ve just bought or about to get a new gas boiler, it’s likely you won’t have to worry about getting a replacement for a lengthy period of time. Several commercial gas boilers will last for anywhere between 10 to 15 years on the average. However in the event whereby you have an existing one that’s fast approaching the end of it’s useful life, then you should know the time go get a new gas boiler is just around the corner, and the earlier you make the purchase, the better (to avoid any surprise breakdowns that’ll leave your home super uncomfortable).
Just like any other home appliance, it’s a fact that an older gas boiler ( especially those that have been installed over a decade ago) are significantly less efficient that the new modern ones. When the older versions were manufactured is a completely different time to now as both technology and climate concerns are wide apart. So when your existing boiler is approaching the end of it’s useful life, it’ll be wise to start saving up to cover the cost of getting a new one. However, if it’s only about 5 years ago your boiler was installed, it’s highly likely to still be very efficient.
What Is A Gas Safety Certificate?
Do you wish to know what a Gas Safety Certificate is and if you need to get one?
If you’re in the UK and you own a rental property, you have a statutory obligation to obtain a Gas Safety Certificate. The law ( Gas Safety - Installation and Use, Regulations 1998) stipulates that landlords as a matter of necessity should have all their gas appliances, fittings,and property flues subjected to yearly checks in order to ensure that they’re are totally safe.
The Gas Safety Certificate can be referred to in a number of ways which includes Landlord Gas Safety Record ( LGSR) or CORGI PROFORMA 12 (CP12). The later dating back to when the official body for gas safety in the UK was CORGI. However, the official body is now known as Gas Safe, hence it’s now usually called a Gas Safety Certificate or something along that line. But regardless of whatever you choose to call it, as long as you reside in the UK, it’s crucial to know that if you need one as soon as possible. So how do know if you need a Gas Safety Certificate?
If you’re a homeowner with a property that you live in, you’re not required by the law to obtain a Gas Safety Certificate. There’s nothing like a homeowner’s gas safety certificate, however we’d recommend you subject all you gas appliances and pipework to yearly examinations to ensure they’re functioning properly and safely.
If you’re a landlord in the UK, you’re required by the law to get a Gas Safety Certificate to ensure your property is safe for your tenants. You must reach out to an approved Gas Safe engineer who’ll carry out annual checks on your appliances to ensure that they’re totally safe.
You should have your boiler serviced every year. This ensures that your central heating system is running safely and efficiently, but it’s often also a requirement to keep your boiler’s warranty valid. To avoid disruption to your heating, the best time of year to service your boiler is the summer. You’ll often find that boiler companies will charge less because they have less work.
Answer a few quick questions to help us match you with the right Heating Engineer
Receive no-obligation quotes from 4 Heating Engineers working in Bristol.
Compare prices, customer reviews and services, and hire the right Heating Engineer.
View our open Heating Engineer jobs near you
Join today