Find a Kitchen Installer you can trust in Farnborough.

With the number of appliances, trades and products involved in the process of kitchen installation, it’s unarguably one of the most difficult rooms to renovate. And if an efficient management is not provided, the process can drag on for a lengthy period. As a result, if everything goes well, your new kitchen renovation can be installed in less than a week, but in most cases, this will often take a much longer time to complete. 

When it comes to kitchen renovation, proper management of the timeline is crucial to ensure a smooth and hitch-free process. Trades are required to be scheduled in the appropriate order as some specific tasks must be concluded before the others. In other words, to prevent unwanted push back timelines, everything must be properly organized.

Furthermore, it’s also key to provide sufficient time to enable the full completion of each stage in the process so as to prevent reschedule trades in the event whereby one stage happens to be more time consuming than planned.

Another important factor that can affect the timeline is the type of kitchen splash back. While tile splash backs are a lot quicker due to the fact that the tiles can be cut on site, individualized stone or glass splash backs often take a longer period of time to fit.

If you prefer a kitchen with stone benchtops, usually your kitchen will take much longer than 10 days to install as benchtops can not be done prior to the installation of the kitchen cabinets - average turnaround time for this is usually about 4 to 5 weeks. However, kitchens with laminate worktops can be installed within a week or at times, up to 10 days. This is because laminate kitchen worktops is typically delivered alongside the kitchen.

Most cookers have a depth of 60cm. This matches the standard depth of kitchen cabinets. However, you can get cookers and work surfaces that are shallower or deeper.Range cookers usually look best if they match the surfaces next to them. If you want your electric range cooker to do this, make sure you measure your work surfaces before you go looking for a cooker.

A plinth is a solid base that your cooker can sit on. It raises your cooker up from the ground and makes it easier to use. It will also make your cooker look in-keeping with your kitchen units if they sit on plinths too. However, a range cooker can also work effectively and look good without a plinth. If you don’t want one, make sure you check that the cooker you want doesn’t come with or need a plinth before you buy it. If you want to fit one in your home and are looking for an installer, we can help. Fill in our online form and we’ll put you in touch with up to 4 electricians in your local area.

An electric range cooker should always be installed by a registered electrician. They will be aware of wiring regulations, what sockets are needed and make sure that your cooker is installed safely and correctly. make sure you book one before your new cooker id delivered!

You can technically install an electric range cooker anywhere, as long as it’s not in a room containing a bath or shower. Wherever the cooker is, it should be in area with: Cooker, No draughts, sufficient air supply. If you are redesigning your kitchen, check with the designer on where best to locate it.

Cookers usually look best if they’re installed at the same height as the work surfaces they’re next to. Most range cookers have adjustable legs so that they match a range of work surface heights.If you want your range cooker to match your work surface height, make sure that your installer knows this before they get started.

a typical rate would be around ₤ 300 for suitable kitchen doors just from a local company, or up to ₤ 1200 from a large National supplier.

Range cooker hoods should be installed between 65 -75cm above the hob. However, you should check installation instructions, as some cooker hood styles need to be installed slightly lower. If you fit your cooker hood too high, it will reduce extraction performance.