Find a Security Specialist you can trust in Newport.

Various studies have suggested that CCTV is an effective deterrent against home burglaries. In the event that a crime is committed on your property, well placed CCTV means you’ll have the evidence to help the police. It has been recorded consistantly that since CCTV systems have been installed, localised crime has fallen and has lead to more arrests.

There are several advantages that comes with owning an electric gate such as the ability to close your gate with little to no effort. The list goes on, but one of the major reasons of having a gate installed is the security it provides. Several homeowners are not quite sure if electric gate can offer the much-needed security for their property. If you also have the same concern, then you’ve come to the right place! In this post, we aim to provide you with an insight into electric gates and their security so as to help you make the best decision moving forward. Let’s take a look!

First and foremost, if your electric gate is well boarded, they’re able to provide a level of privacy as no one will be able to see through them.  Asides this, the also represent a physical boundary – an extension of the walls or hedges that surrounds your property. With this, no one can simply walk over your drive or have any sort of access to your home or garden without having to take some sort of risk. Anyone who want to come onto your property would already be detected before ring the bell or arrive at your front door. Using audio or video intercoms, you’ll either hear or see who is at your gate and decide who gets to come in and who doesn’t.

What if someone wants to force their way onto your property by ramming your gates with a van, are electric gates strong enough to hinder them? Well, it’s very unlikely that they will as anyone applying force on swing gates that quite far from the hinges has leverage on their side. With a magnetic lock at the opening edges and ground latches, you can reinforce your gate. However, a lot of force from a vehicle with multiple horsepower multiplied greatly by the benefits of the leverage.

Network enabled/IP cameras are digital CCTV cameras. With these cameras, the video captured can be streamed over the internet anywhere in the world. Most manufacturers of IP cameras have a smartphone app that allows you to watch the video feed on your phone.

Having a security gate installed on your property brings about a lot of benefits. However, to ensure these benefits are maximized, it’s important to make sure the gates are properly installed. The installation can be made a DIY task or professionally installed. If you wish to install your security gates by yourself, then you’ve come to the right place! In this post, we’re going to take you through the processes involved in the installation of a security gate. Let’s take a look!

1. Go through the instructions carefully to get the best out of your installation and also a good understanding.
2. Dig holes for the posts. Don’t make holes round to make sure the posts do not turn or twist.
3. Get rid of any obstructions like uneven ground, rocks or any other obstacles that may impact the free opening of the gate.
4. Re-confirm the distance between the two poles to make sure that the gate can hang perfectly between them.
5. Get an adjustable hinge. Adjustable hinge will allow for extra customization while also enabling improved correction of errors.
6. Make sure that the measurement taken leaves sufficient space for vehicles such as emergency vehicles and package delivery trucks when opened.
7. If you have a fence that’ll be connected to the gate, you should install the gate at the back of the fencing pillars. If you later decide to automate the security gate, this will prove to be a smart move as it enables a free and unhindered function.
8. Make sure you go through the local laws before installation.

The cost differs greatly relying on the size and intricacy of the alarm system. A basic system can include simply one PIR sensor per area to normally cover the space.

An even more robust as well as delicate system you could have vibration sensing units fitted to the windows on the downstairs. You can link outside lighting, safety and security entrances and all type of exterior controls right into the alarm system. A straightforward professional alarm system installer will have the ability to review your demands and suggest the correct method to safeguard your residential property.

Watch out for installing a Do It Yourself alarm these are created to be easy systems as well as easy to set up. They can simply be unplugged and deactivated quickly by any kind of ready crook. They additionally call for batteries to be changed consistently. If the batteries in the sensing units run out this will certainly imply that the system will not be securing your home appropriately.

There are a wide array of smart ring doorbells available in the market today and all coming with detailed installation instructions. Here, we’ll make it clearer to enable you get it done right, the right time and with little stress. With a properly installed ring video doorbell, you’ll be able to identify who’s at the door before opening and even chat with them via your table, PC or Smartphone. And to make it even more interesting, you can easily install a ring doorbell yourself and save some money.

Installation Steps

• Assemble the mounting bracket

Bring out the mounting bracket that comes with your ring video doorbell. You’ll discover a small level within the mounting bracket, put this on the bracket’s slot. Once done, gently line it up to the spot where you want to place your doorbell.

• Determine the pilot holes

Firstly, ensure the bubble found in the level is straight. Then, mark out where the screws will go through.

• Drill the identified pilot hole spots

When drilling, you’ll need not just your drill and drill bit (or a masonry bit, if its a brick), but also your eye and ear protection. Drill the marked out spots to create pilot holes and subsequently hammer in the plastic anchors that comes in the ring doorbell’s pack to help hold your screws in place. Once done, put the bracket on the top and tighten your screws.

• Scan the QR Code

With the use of your phone, scan the special QR code given behind your doorbell to ensure the ring doorbell is only accessible by you and your loved ones.

• Secure the doorbell

Ensure that the bracket is properly in place and attach your doorbell to the mounting bracket. Once done, you can make it safe by using smaller security screws to hold it. Upon completion, your ring doorbell is ready for use - it’s that easy!

This is usually the question that comes first when thinking about installing a home security system and reasonably so. However, it can also be very tricky to provide an accurate answer as alarms now features varying shapes and sizes. However one thing to have in mind when it comes to getting a burglar alarm is that it’s definitely better to be safe than sorry. Here, we are going to provide a clear and succinct information to help you get a good idea of how much you’d have to spend to have your house secured.

Let’s Consider the Different Types of Burglar Alarms

• Bells-only alarms

This is the most popular type which features a loud siren that is positioned at the exterior of your building and linked with varying motion sensors in strategic locations. Whenever a motion is detected by the sensors, an ear-splitting sound would be triggered. To get the basic starter kit (2-3 sensors and 1 siren) for a DIY installation, the cost ranges between £130 - £160. However for a more advanced system, the price jumps to £400 - £500.

• Dialler alarm systems

This works with different motion sensors strategically placed across the home. When triggered, it sets off the siren and also rings your mobile device. A system with two sensors and one emergency number costs between £200 - £300.

• Monitored alarm systems

This system is linked to a central call centre who alarms the authorities or private security to a violation of the protected zone. The cost for a monitored alarm system starts within the range of £500 to £600, while the monitoring services can cost within the range of £300 to £400 annually.

Other Possible Costs

• Installation

After purchase, you’ll need to decide whether or not you want your system professionally installed. Generally, the cost of getting a professional installation service costs between £150 to £200.

• Maintenance

Do you think your burglar alarm requires yearly maintenance inspections? Depending on the make and model of the system, the maintenance cost may vary. However, the prices usually starts within a range of £100 to £150.

One of the major challenges faced by double gates is wind as this is always blowing over the gates and slamming them together anytime it passes by. So how do you tackle this? Since you can do only so little about the wind, the only option you have is to enforce or secure your double gates. This is quite simple if you have the adequate knowledge and skills, if not, we’d strongly recommend calling in a professional who can guarantee the best results the first time. In this post, we’re going to take your through the processes involved in securing a double gate to ensure your project turns out a success. Let’s take a look!

1. Hammer a pipe into the ground. Since this isn’t a heavy construction work, you need not worry about water finding its way into your basement. To do this, simply open the gate and stretch it to determine how far it can go. Once done, proceed to mark the place right below the gate’s edge. This is the spot where you will hammer in the metal pipe.
2. Install the lower bracket. With the pipe in place, the next thing is to have the lower bracket installed. Start by drilling some pilot holes if necessary, then screw the nails right into the wooden gate via the bracket’s holes.
3. Take measurements for the top bracket using the cane bolt. Once done with the lower bracket installation, you’ll have to bring out the cane bolt and attach it to the gate to give you an idea of where to place the top bracket - mark the spot using a pencil.
4. Install the top bracket. Start by removing the cane bolt and install the top bracket just as you’ve done with the lower bracket.
5. Install the cane bolt through both brackets.