Find a Security Specialist you can trust in Longfield.

There are a wide array of smart ring doorbells available in the market today and all coming with detailed installation instructions. Here, we’ll make it clearer to enable you get it done right, the right time and with little stress. With a properly installed ring video doorbell, you’ll be able to identify who’s at the door before opening and even chat with them via your table, PC or Smartphone. And to make it even more interesting, you can easily install a ring doorbell yourself and save some money.

Installation Steps

• Assemble the mounting bracket

Bring out the mounting bracket that comes with your ring video doorbell. You’ll discover a small level within the mounting bracket, put this on the bracket’s slot. Once done, gently line it up to the spot where you want to place your doorbell.

• Determine the pilot holes

Firstly, ensure the bubble found in the level is straight. Then, mark out where the screws will go through.

• Drill the identified pilot hole spots

When drilling, you’ll need not just your drill and drill bit (or a masonry bit, if its a brick), but also your eye and ear protection. Drill the marked out spots to create pilot holes and subsequently hammer in the plastic anchors that comes in the ring doorbell’s pack to help hold your screws in place. Once done, put the bracket on the top and tighten your screws.

• Scan the QR Code

With the use of your phone, scan the special QR code given behind your doorbell to ensure the ring doorbell is only accessible by you and your loved ones.

• Secure the doorbell

Ensure that the bracket is properly in place and attach your doorbell to the mounting bracket. Once done, you can make it safe by using smaller security screws to hold it. Upon completion, your ring doorbell is ready for use - it’s that easy!

Network enabled/IP cameras are digital CCTV cameras. With these cameras, the video captured can be streamed over the internet anywhere in the world. Most manufacturers of IP cameras have a smartphone app that allows you to watch the video feed on your phone.

According to several studies and survey of ex-burglars, a home or building is less likely to be burgled with the availability of properly functioning and well fitted burglar alarm system. So if you’re thinking about installing one in your house, you can as well make sure you get the best possible burglar alarm that’s just right for your home. Several people asks the question of the best burglar alarm, but the fact is, it all depends on a number of factors such as your budget, personal preferences, your location, home features as well as the protection and response level you require. To put you in the right direction to make the best choice, here’s a breakdown of the types of burglar alarm systems to help you determine the one that will best suit your home.

lBells-Only Alarms

This makes a loud sound but that’s as far as it goes. It will not contact anyone.

Pros

• No monitoring contract and payment

• Easy to install

Cons

• It does not contact anyone.

• It may not deter the burglars if there’s no one around to stop the intrusion.

lDialler Burglar Alarms

This contacts your phone or any other numbers nominated once the alarm is triggered.

Pros

• No monitoring contract and payment.

• Nominated numbers would be dialled

• It can also notify you of other dangers such as fire if extra sensors are acquired.

Cons

• If you opt for a GSM dialler, a weak mobile network can affect its effectiveness

• Nominated numbers may be unavailable when dialled.

lSmart home security system

This contacts your or your loved ones whenever the alarm is triggered via a Smartphone or tablet application.

Pros

• Notifies you when away from home

• Can be monitored and controlled from a Smartphone

Cons

• If you opt for a GSM dialler, a weak mobile network can affect its effectiveness

• They can be expensive depending on your selected elements

lA monitoring contract

This implies paying a monthly or annual fee to a company to act or notify the police the your alarm is triggered

Pros

• The monitoring company is in hand to act in order to prevent the potential burglary and liable if it doesn’t.

• Some of the companies also offer maintenance services

Cons

• Expensive

• It cannot be installed by yourself

Click here to learn more about burglar alarms.

There are several advantages that comes with owning an electric gate such as the ability to close your gate with little to no effort. The list goes on, but one of the major reasons of having a gate installed is the security it provides. Several homeowners are not quite sure if electric gate can offer the much-needed security for their property. If you also have the same concern, then you’ve come to the right place! In this post, we aim to provide you with an insight into electric gates and their security so as to help you make the best decision moving forward. Let’s take a look!

First and foremost, if your electric gate is well boarded, they’re able to provide a level of privacy as no one will be able to see through them.  Asides this, the also represent a physical boundary – an extension of the walls or hedges that surrounds your property. With this, no one can simply walk over your drive or have any sort of access to your home or garden without having to take some sort of risk. Anyone who want to come onto your property would already be detected before ring the bell or arrive at your front door. Using audio or video intercoms, you’ll either hear or see who is at your gate and decide who gets to come in and who doesn’t.

What if someone wants to force their way onto your property by ramming your gates with a van, are electric gates strong enough to hinder them? Well, it’s very unlikely that they will as anyone applying force on swing gates that quite far from the hinges has leverage on their side. With a magnetic lock at the opening edges and ground latches, you can reinforce your gate. However, a lot of force from a vehicle with multiple horsepower multiplied greatly by the benefits of the leverage.

This is usually the question that comes first when thinking about installing a home security system and reasonably so. However, it can also be very tricky to provide an accurate answer as alarms now features varying shapes and sizes. However one thing to have in mind when it comes to getting a burglar alarm is that it’s definitely better to be safe than sorry. Here, we are going to provide a clear and succinct information to help you get a good idea of how much you’d have to spend to have your house secured.

Let’s Consider the Different Types of Burglar Alarms

• Bells-only alarms

This is the most popular type which features a loud siren that is positioned at the exterior of your building and linked with varying motion sensors in strategic locations. Whenever a motion is detected by the sensors, an ear-splitting sound would be triggered. To get the basic starter kit (2-3 sensors and 1 siren) for a DIY installation, the cost ranges between £130 - £160. However for a more advanced system, the price jumps to £400 - £500.

• Dialler alarm systems

This works with different motion sensors strategically placed across the home. When triggered, it sets off the siren and also rings your mobile device. A system with two sensors and one emergency number costs between £200 - £300.

• Monitored alarm systems

This system is linked to a central call centre who alarms the authorities or private security to a violation of the protected zone. The cost for a monitored alarm system starts within the range of £500 to £600, while the monitoring services can cost within the range of £300 to £400 annually.

Other Possible Costs

• Installation

After purchase, you’ll need to decide whether or not you want your system professionally installed. Generally, the cost of getting a professional installation service costs between £150 to £200.

• Maintenance

Do you think your burglar alarm requires yearly maintenance inspections? Depending on the make and model of the system, the maintenance cost may vary. However, the prices usually starts within a range of £100 to £150.

Most cameras have a night mode to capture video in the dark. They use an infrared sensor to detect infrared light. These pictures are black and white, but still retain plenty of detail. Cameras are also able to see and record in adverse conditions such as fog, dust and smoke.

Properly installed and calibrated alarm systems will very rarely trigger a false alarm. If you have pets you will need to use pet-friendly alarm systems. External sensors should be properly calibrated to avoid triggering in the wind or rain. NSI is a recognised standard for all alarm installations, check the NSI flag is displayed on an installers credentials.

One of the major challenges faced by double gates is wind as this is always blowing over the gates and slamming them together anytime it passes by. So how do you tackle this? Since you can do only so little about the wind, the only option you have is to enforce or secure your double gates. This is quite simple if you have the adequate knowledge and skills, if not, we’d strongly recommend calling in a professional who can guarantee the best results the first time. In this post, we’re going to take your through the processes involved in securing a double gate to ensure your project turns out a success. Let’s take a look!

1. Hammer a pipe into the ground. Since this isn’t a heavy construction work, you need not worry about water finding its way into your basement. To do this, simply open the gate and stretch it to determine how far it can go. Once done, proceed to mark the place right below the gate’s edge. This is the spot where you will hammer in the metal pipe.
2. Install the lower bracket. With the pipe in place, the next thing is to have the lower bracket installed. Start by drilling some pilot holes if necessary, then screw the nails right into the wooden gate via the bracket’s holes.
3. Take measurements for the top bracket using the cane bolt. Once done with the lower bracket installation, you’ll have to bring out the cane bolt and attach it to the gate to give you an idea of where to place the top bracket - mark the spot using a pencil.
4. Install the top bracket. Start by removing the cane bolt and install the top bracket just as you’ve done with the lower bracket.
5. Install the cane bolt through both brackets.