Find a Shop Fitter you can trust in Strathdon.

There’ll certainly come a time in which even the neatest and tidiest of homes will do just fine with a good deep cleaning. As a pretty tedious task which can easily become overwhelming, it’s always helpful to break the tasks into smaller and more manageable tasks. This guide will show you the best approach to take to have your residential property deep cleaned. However, if you are not confident enough to pull this off, we’d strongly advise that you get in touch with a professional domestic cleaners who can help guarantee the best results and also save you some time as well as money that could result from costly errors or accidents.

• Dust your house. Dust each and every single room of your house, including the topsides of all furnitures, the undersides of the shelves as well as the handrails, picture frames, TV screens and knickknacks. It’s always better and easier to dry dust, but you can also dampen a microfibre cloth with warm water to get rid of stubborn stains.
• Clean furniture fabric. Neaten the pillows and furniture blankets, strip and remake beds. Also, brush the furniture surfaces using a vacuum extension as required.
• Clean the mirrors and glass. Use a soft and clean cloth (both wet and dry) to wipe down mirrors and windows throughout the house.
• Clean surfaces. Wipe all surfaces throughout the house and disinfect as needed. Ensure to clean all surfaces that the fingers touch like door handles, light swtiches, TV remotes and the likes.
• Clean the kitchen and bathroom. Spray cleaner on sinks, tubs and toilets and leave for some minutes before coming back to scrub. Wipe down the microwave, cabinet and appliance doors in the kitchen.
• Clean floors. Sweep and mop or scrub the floors as required.
• Vacuum the house. Make sure that all the necessary areas are well vacuumed.

On the grand scale of things there isn’t a huge difference between B-rated windows and A-rated windows. Consumer watchdog Which? have calculated an extra 6.5% would be saved on energy bills with A rather than B rated panes. Be aware that A rated windows are slightly more expensive, however.

If you’re considering getting a new tarmac driveway or outside area, it’s important to know how long it takes to dry. Try to use it too early and you might damage it and ruin its appearance.

It won’t be long before you can walk on your new surface, as long as you’re careful. However, it’s a good idea to avoid putting heavy objects or driving on it for 2-3 days. For a more accurate timescale, ask your tarmac paving and driveway pro.

Once you’ve made the decision to acquire a stairlift, the next step is to find a reliable company that’ll supply you with what you need. When it comes to stairlifts, Stannah is one of the industry leading manufacturers which supplies and installs a great number of various starlift models every year which goes a long way to enhance the lives of their customers.  When you go for Stannah, you can be rest assured knowing you’ll definitely get a top quality chair lift as well as an excellent service. Once you’ve selected your preferred company to supply the stairlift you need, the next thing would be to find one depending on your budget and needs. The cost of Stannah stairlift varies depending on the model required which would be determined by your needs and preferences.

The differences in Stannah stairlift price are showcased in the features of the model as well as your home stair configuration. For example, a Starla stairlift bought new for a straight stairlift will be about £2,000 less expensive when compared to the same model for a staircase that’s curved. This is due to the fact that the rails must be custom built to fit your staircase’s specifications.

Generally, a straight Stannah stairlift price for Stannah 600 will typically range from around £2300 to about £2800. On the other hand, a curved Stannah stairlift price for Stannah 260 will typically range from around £4,300 to about £4,800. Another great option is to hire a stairlift as the monthly rental costs are a good way to keep the Stannah stairlift price down - if the need is just for a short term.

Do you want to beautify and increase the value of your home? If yes, a refurb and house extension is definitely a great option to consider. Depending on your home extension project, the value that’ll be added to your home’s resale value varies. However, the cost of completing a house extension project can be huge, so you just might want to consider your financing options. Fortunately, there are various options through which your house extension project can be funded with each having its own pros and cons. Your specific circumstances will determine the one that’s going to work best for you, so let’s take a look at some of the best options to help you fund your project.

• Home Remortgaging

The process whereby a mortgage is transferred from one provider to the other is known as remortgaging. This is usually done to generate funds for a project by entering a more lengthy repayment term commitment when switching. If you want to raise your funds in a quick manner, this process works best.

• Savings

This is a good reason to cultivate a good saving habits. If you’ve been able to save up some mega bucks then you’d probably won’t have to borrow money to finance your house extension.

• Unsecured Loans

If you do not buy into the idea of borrowing more against your property, you may just be able to apply for an unsecured loan especially if you have a good credit record. A secured loan makes use of collaterals like a car or house to serve as a cover for the lender, meanwhile an unsecured loan is based mainly on the credit managing history of the borrower.

• Credit Card

There are some great benefits that comes with financing your small or medium scale extension project with your credit card. Not only does it offer some real lifeline if problems arise during the project, but you can also avoid paying excessive interest on the investment by ensuring your deal has a 0% introductory rate.

Did you try rendering a wall but it doesn’t turn out the way you would have hoped for? Or perhaps you’ve been watching your wall render gradually deteriorate over time. Regard of your purpose, learning how to repair render cracks on wall is usually a great skill to have with your home maintenance in mind. However, whenever these crack are too large or difficult, we’d recommend you call in a reliable professional who can guarantee the best results for help. In this guide, we’re going to take you through the wall render repairing process. Let’s have a look!

No matter how solid a building material is, over time it’ll yield to the elements. When it comes to wall rendering it may be a case of too much sunshine or a costly mistake in the application process, but in truth, it cracks just because it cracks.

In order to repair render cracks, you’d have to start with a removal of damaged or cracked render. You’ll have to remove all the render or just a small section depending on the area you’re working on. If you’re able to clean all of the existing render as well as the paint over it all (both old and new), then removing a small section would work better as it makes it look neat and redone. Upon the removal of the existing render, the next important step would be to remove all loose material as well. Once done, you can then leave for up to 2 days to allow any trapped moisture to come out. Unfortunately, if the rains you’d have to wait till that dries too before you proceed.

Once dried, you can buy a pre-prepared render mix which already contains cement, lime and sand. Mix a 20kg bag with 4 litres of water (or check the product instructions and follow strictly), the mix to a fine consistency. Render is quick to dry, so you’d want to apply within 30 minutes of mixing. Make use of a trowel to apply the render on the affected spots and blend with the surrounding area.

Artex is a water based surface coating which is used to decorate both ceilings and walls with a textured finish. Back in the 1970’s, artex happens to be very popular when the swirling or spiky effects it creates  were considered to be the best of fashion when it comes to interior designs. However, in today’s world, an artex ceiling is not only considered outdated but also a pain to clean and repair.

If you have an artex ceiling in your residential property and looking for a way to get it off, then you’ve come to the right place. In this post, we’re going to show you how its done without much stress.

To get started you’d need to get the following tools and material which includes: safety goggles, dust mask and rubber gloves, plastic sheeting, canvas drop cloth ( carpet) or rosin paper (hard floor) and step ladder

Prepare the room. Start this by moving all furniture out of the room or stack the furniture at the centre of the room and cover using plastic sheets. Once done, cover all non-removable items with plastic sheets and lay down a canvas drop cloth for carpet floors and rosin paper for hard floors

• Put on your safety gear
• Use a utility knife or joint knife to slowly chip away at the texture and create a smooth surface.
• Mix joint compound in a bucket as per the instructions on the package
• Skim the surface with a thin layer of joint compound to smooth it out using a taping knife, then leave to dry overnight before you proceed
• Lightly sand the surface smooth with the help of a 220-grit sanding block
• Use a damp cloth to wipe the surface clean prior to painting.

Yes, of course! It’s common for people to replace just one double glazed window. One reason that people want to replace one window is that the sealed unit inside has failed. You’ll know if this has happened because you’ll be able to see condensation on the inside of glass, which gets frustrating because you can’t wipe it away. In this case, you can choose to simply replace the sealed unit or the entire frame, which you might want to do if it’s looking past its best.

When you’re replacing just one double glazed window, if you know the brand of your current windows you could ask your installer if they can source the same ones. This will help to keep them looking as similar as possible, although if your existing windows are very old you may notice some discolouration on the exterior compared to the new one, and locks and trickle vents might look different.

Replacing just one double glazed window shouldn’t take a qualified window fitter long, and could cost as little as £400. If you want to simply replace the sealed unit, that may only cost around £250. You could try to fit a new window yourself, but it’s worth bearing in mind that all replacement windows need to be certified that they’ve been installed to meet building regulations, so you’ll need to apply to your local building control officer who will come and inspect the work then issue a certificate. If you ask an installer who is registered with a self-certification scheme (like FENSA) to fit the window for you, they can issue the certificate themselves when they’ve finished the work.