Find a Shop Fitter you can trust in Forfar.

Render serves two basic functions. One is it’s protective qualities as render acts as waterproof for the wall which enables them breathe by allowing water vapour move from the inside to the outside of the structure while also working to prevent water or rain from finding its way inside the structure. While the second function is the decorative qualities as render is able to provide the structure with a fine finish and colour to make the building a lot more appealing and correcting faults in line and level in the masonry.

If you wish to apply render on your external wall, you’d probably be wondering just how thick the render should be to perfectly serve both of functions. In this article, we’re going to take a look at just that!

For a render thickness, the British Standard Wind Driven Rain Index has come up with 4 ratings which include Sheltered, Moderate, Severe as well as Very Severe. An area with Very Severe rating include South West England. This rating implies that the thickness of the render in this area should be increased to at least 20mm for a direct one coat render applications as well as 5 to 6 external wall insulation base coat applications. And if you happen to reside within one mile of the coast, it’s strongly recommended you incorporate an extra repellent protection like Paraguard AG from Parex.

In general, render that’s prepared on site with cement and sand should be have a minimum of 20mm to 25mm thickness. Although, it should be noted that the quality of the render is based on quality of the sand incorporated, the design mix as well as being largely dependent on how good the mixing technique from the applicator is. The most common reasons why traditional renders fails is due to both poor mixing ratios and low quality materials used.

Choose an architect whose design vision fits with yours – but make sure they’ve got something new to bring to the table. Also check them out to see what projects they have previously undertaken. Ask them. Communication is vital. Pick a commercial architect who can communicate well with everybody involved in the project.

Generally, it’s possible to extend a barn conversion, but there are certain conditions that you’ll probably need to meet. Ultimately, it’s up to your local planning office to decide whether to approve your planned barn conversion extension or not.

Typically, small extensions on the side of a barn conversion are often approved, particularly if they serve to preserve the original character of the barn. This could be because the extension will mimic the appearance of the original structure, or house facilities that would look odd in the original building.

However, you probably won’t be allowed to build a larger extension, or one that isn’t in keeping with the appearance of the original barn.

How To Remove Flaking Paint From Exterior Walls

For a successful exterior wall painting project, all that’s required is the right painting tools and equipments, the appropriate exterior paint as well as the necessary preparation of the surface. With the later being perhaps the most important part of the project which is likely to take your time and effort as there’s no short cut to it. But once you have a good idea on how to prepare the exterior wall’s surfaces, the painting of the exterior of your house becomes a lot easier. And a good example of this, is the process of removing the flaking paint on the surface. Fortunately, you do not require the skills of an expert to be able to remove the flaking paint from your exterior walls. So let’s take a look at how you can remove flaking paint from your exterior walls with relative ease.

✓ Clear all flaking or peeling paint. This involves scraping the entire painted surface with a scraper to remove all loose paints. For the paints that wouldn’t yield easily, you can apply extra pressure to wipe it out. However, it’s important to be careful while doing this to avoid gouging out or damaging the surface.

✓ Use coarse sandpaper. Make use of a sandpaper to sand all the exterior wall’s surfaces until they’re smooth. When you get to tight spaces and trim, you can incorporate a sanding block to make your job easier and more effective. Note that a smoother surface will make for a better adhesion.

✓ Use an orbital or power sander. If the paint is peeling, you can scrape it off perfectly with the help of a power sander. This will help you in achieving a smooth surface on inaccessible edges and more.

Are you interested in installing an air source heat pump in your home or property? If yes, then you’d probably want to know just how much this is going to cost. Well, so are many other potential investors in the unit and we aim to answer this question once and for all. In this post, you’re going to discover the price range at which your new air source heat pump will fall in.

As simple as it seems, the cost of an air source heat pump can’t be accurate and straightforward as there are a number of factors that greatly influences the price. These influencing factors include the size of the heat pump, the system’s complexity, your personal preference - whether simple or advanced controls, and lots more. However, according to Energy Saving Trust, an air-to-water heat pump should fall within the range of £7000 to about £11000. What’s more? You’ll also need to put into consideration the cost of upgrading your radiators or fitting underfloor heating which can also cost you thousands of pounds.

In general, the main cost of a heat pump is the upfront cost of making a purchase as well as installing it. The heat pump will consume a little amount of electricity and the running costs are also relatively low. The amount your air source heat pump will cost largely depends on your home’s size, the temperature you want your home or property to be as well as how properly insulated your home is.

The period of time it’ll take to recoup your investment in the system in energy savings will also depend on a wide range of factors including the price you pay for electricity, how efficiently the system works, how you use the heat generated and more.

Can Handyman Do Drywall?

Do you wish to hang a drywall or perhaps you’re just in need of a drywall repair and wondering if a handyman would be up to the task? Well, you’ve come to the right place! For several home and property owners, nothing provides more headaches than cracks or damage to their drywall which always tend to occur more often. Large cracks, holes, punctures and other forms of drywall damages are not the easiest to fix and even more so, when these damages are to the ceiling drywall. Definitely not the type of task you’d like to turn to a DIY project and not up to what you’d like to consider calling in a specialist for help. Hence, the handyman is the best option to have it resolved!

Whether you’re in need of help to patch up a few holes or you want to hang drywall over a whole room, drywall is vital to the comfort of your home. One little damage can affect the entire room making everywhere look dilapidated. What’s more? The drywall’s texture and finish are also of great importance, so if you want your home to look beautiful for several years to come, reaching out to a handyman may be your best bet.

Typically, the handyman should be able to deliver a wide range of drywall solutions. These includes hanging drywall, drywall repair, skim coating drywall, installation of drywall, step or fall through ceiling damage, popcorn ceiling removal and repair, drywall finishing, new ceiling, mud, tape and sand, plaster wall repair, water damage removal and repair, drywall patching and lots more. So you know regardless of the drywall needs you might have, you can be rest assured there are handymen out their who are capable of providing them when you reach out.

Yes. Most extensions will add substantial value to your home, and you may find that the extension adds more value than it cost. However, it’s important to be sure that the home remains balanced. Extending your garage and leaving your property with no parking spaces, for example, may impact your ability to sell.

If you just acquired an electric shower or thinking about getting one soon, one of the first things that comes to mind is who to call on for help to handle its installation. Well, if you’re confused about the perfect tradesperson you’re certainly not alone! As we’re always told that electrics and water don’t mix, so who do you call when buying an electric shower? Is it a plumber, an electrician or probably someone who with a knowledge of both? Well, you’d find the answer here as we’ve created this post specifically to resolve this concern once and for all.

Refurbishing and renovating any part of one’s home always tends to be a tricky and daunting prospect and without a single doubt, the bathroom is not an exception. With a wide array of things to put into consideration such as plumbing as well as bathroom electrical safety, it always pays to have all your bathroom related questions answered before you go ahead to employ a tradesperson.

Being fully aware any task involving electrical works can be very dangerous, anyone that takes on a job such as fitting an electric shower must be qualified to work with electrics safely. This is referred to in the building regulations sections which is termed as part P dealing with domestic electricals, as such you may hear tradespeople term themselves as being “Part P qualified. What this implies is that they’re registered with a competent persons scheme like ELESCA OR NICEIC to self certify their work. Due to the high risk involved in their field, all electricians should be able to self certify their work, whereas only some plumbers should also be able to do the same. As a result, dedicated bathroom fitting companies should possess individuals who can deal with the plumbing, electrics as well as tasks such as tiling.