Find a Shop Fitter you can trust in Skelmorlie.

When thinking of pests, a lot of thing comes to mind - while some individuals think about bug and insects, others think about squirrels, raccoons, mice an rats, in fact some might even out deer in that category. And well, they’re all right! Pests simply refers to any insect, rodent or wildlife that’s considered to be unwanted or undesirable due to the fact that they invade people’s homes or businesses wrecking havoc, causing damages and increasing the risk of communicating a disease or illness. Therefore, a pest control refers to the process of managing, which can be by using repellents or deterrents, or removing pests from a residential or commercial property.

The act of managing or controlling pests can be carried out using a number of techniques. You can decide to kill them using the services of an exterminator or doing it yourself, but you can also incorporate other methods too. These methods includes making use of sound to serve as deterrent or repellent to the pests as well as making alterations around the property to prevent pests from entering. In general, you should know that it’s always preferable to prevent pest than having to face one that has already been infested. However, if the problem already exist then there’s no two ways around it, you’d have to get them removed first.

A professional pest control service can go a long way to help when it comes to managing and controlling pests in any property. They carry out an inspection of the property to ensure that there are no pests inside, figure out where the pests are coming from and entering into the house, deal with pests already in the home, advise whether there’s any damage as a result of the pests, spray regularly to prevent the pest if you wish and also seal off the possible entry points for the pests.

There are several different kinds of plastering. ‘Dot and dab’ refers to a base layer of plasterboard which is attached to a wall using ‘dabs’ of adhesive. ‘Floating’ is a technique where a backing or undercoat plaster is applied to walls. ‘Skimming’ or ‘reskimming’ refers to the very thin final decorative layer of plaster.

Although we advocate non-removal of trees, but we also know for a fact that this isn’t always possible especially when it involves safety challenges or damage to property. If you’re looking to remove a tree on your property, then you should probably confirm whether or not you’d require a council approval.

In the UK, if the tree you want removed has a Tree Preservation Order (TPO) placed on it, then before you’ll be able to perform any sort of work to the tree ( be it cutting a branch or felling/ removing the tree), you must obtain a permission from the council.

The Tree Preservation Order is created by local planning authorities such as a district, borough or national park with the aim of providing adequate protection to trees which provide amenity values to the public. Any act to the TPO protected tree such as cutting down, topping, lopping, uprooting or wilful damage considered a criminal offence. In other words, if the tree on your property is visible and is enjoyed by the public then there’s a possibility that there’s a TPO placed on it. To confirm whether or not this is the case, you can reach out to your local council’s tree officer for more information.

You will need to fill out an application form and submit to your local authority in order to request permission of remove a tree. In the event whereby you happen to reside in a Conservation Area, the same rules applies as TPO-placed trees but you don’t necessarily need to have TPO placed on them.

If the tree is in your garden without a TPO placed on it and you do not live in a Conservation Area, then you would not need to apply for permission to have it removed.

So you’ve decided to add some new French doors for your home? If yes, then you’re likely going to be concerned about whether or not you’ll require a planning permission to get started.

Properties are compelled to meet certain requirements and have proper permission in place in order to be in line with the regulations. Overall, you’re going to need planning permission in the following situations:

• If you want to construct something new.

• If you want to a make a major change to a building like an extension.

• If you want to change the use of your building such as converting it from residential to commercial.

Getting a new door or replacing an existing one doesn’t usually require a planning permission as it’s one of the less complicated improvements you can make to a home. As a result, this kind of improvement is normally covered by permitted development rights especially when you’re not constructing an extension for which to use the French door. However in the events whereby a permission is needed, it will most likely going to be granted if the proposed changes does not have an impact on the primary elevations of the house which is usually the front of the building.

It’s also important to note that permitted development can be limited by local authorities. These limitations include buildings in a conservation area, listed buildings, and if you happen to reside in an area of immense aesthetic appeal or other designated areas like National Parks. If such situation before you change your French doors, it’s important to consult your local authority before proceeding.

Render serves two basic functions. One is it’s protective qualities as render acts as waterproof for the wall which enables them breathe by allowing water vapour move from the inside to the outside of the structure while also working to prevent water or rain from finding its way inside the structure. While the second function is the decorative qualities as render is able to provide the structure with a fine finish and colour to make the building a lot more appealing and correcting faults in line and level in the masonry.

If you wish to apply render on your external wall, you’d probably be wondering just how thick the render should be to perfectly serve both of functions. In this article, we’re going to take a look at just that!

For a render thickness, the British Standard Wind Driven Rain Index has come up with 4 ratings which include Sheltered, Moderate, Severe as well as Very Severe. An area with Very Severe rating include South West England. This rating implies that the thickness of the render in this area should be increased to at least 20mm for a direct one coat render applications as well as 5 to 6 external wall insulation base coat applications. And if you happen to reside within one mile of the coast, it’s strongly recommended you incorporate an extra repellent protection like Paraguard AG from Parex.

In general, render that’s prepared on site with cement and sand should be have a minimum of 20mm to 25mm thickness. Although, it should be noted that the quality of the render is based on quality of the sand incorporated, the design mix as well as being largely dependent on how good the mixing technique from the applicator is. The most common reasons why traditional renders fails is due to both poor mixing ratios and low quality materials used.

How Much Plasterboard Do I Need?

Although many people especially contractors have a tough time estimating the number of drywall or plasterboard needed to complete a project, it’s a rather simple task if all factors are taken into consideration. If you’re able to follow the same procedures taken by professionals to count dry wall sheets, you’ll be in the right direction. Let’s have a look at the procedures to follow!

lTake Square Footage Measurement

• Measure the square footage of the area where the plasterboard will be fitted.

• Multiply the height by the width of each wall or ceiling area.

• Add all quantities to obtain a total square-foot amount.

lCalculate Drywall Sheets

• To calculate the number of drywall or plasterboard sheet is very simple once you’ve gotten the total square footage.

• To get started, simply divide the total square footage of area by 32 (that’s if you are using a 4 by 8 sheets) or you can also make use of 48 to make the division (only if you’re making use of the 4 by 12 sheets).

• The answer you get after the division will give you the full number of plasterboard sheets that’s required to complete the project.

We’d recommend you include an extra 10 to 15 percent of whatever you calculate to take care of the possible odd cuts and wastages. This implies that if your total area is 1600 square feet while incorporating 4 by 8 sheets, simply divide 1600 by 32 which equals 50 sheets, now take 10% of 50 which equals 5, then add back the 5 extra to the 50 sheets earlier calculated to get 55 sheets. If you wish to estimate the cost, simply multiply the number of sheets gotten by the price per sheet. Do not forget to include delivery charges and local taxes.

How Much Does Pat Testing Cost?

When it comes to Portable Appliance Testing (PAT) there’s no particular rule that determines how much such services can cost. However as a rule of thumb, you should take note that when calling in a professional PAT testing company they’re likely to charge within the range of £1 to £3 per appliance that’s going to be tested. However, if you have quite a number of appliances to be tested, then there’s a good chance that the price per appliance can be reduced to serve as a bulk discount. So the more the appliances to be tested, the better.

There are companies that actually offer a pricing that’s below £1 per item, however companies likely are most definitely going to have a fixed minimum number of appliances that are required to be tested or a fixed minimum fee like 60 portable appliances. It must, however, be noted that pricing can also go beyond PAT Testing as several professional companies will add some additional advantages which is more than just the test of each individual appliance. This kind of pricing can include other services such as a thorough visual inspection, plug rewiring as well as fuse replacements. They can also include stuffs like Pail and Fail labels in the pricing.

Generally, the average price of PAT testing will be based on various influencing factors such as the type of the appliance, setting, number of appliance to be tested as well as other related expenses. What’s more? Most PAT companies will offer a company with a PAT Testing Certificate so as to certify that the company is in total compliance and also remains a safe environment to work.

There always seems to be lots of things to take care of when moving house. No matter how good your organizational skills may be, it Will be quite challenging to perfect all work without trace of slip.

Therefore, some questions are asked, how long does it actually take to move house? What is the average time to relocate? How long does the moving process take? How much time do you need to organize and perform a smooth and trouble-free relocation?These questions are very difficult to answer,Yet, you can get a rough idea of how long you are going to need to move to your new home.

1) Finding an Appropriate New Home

House hunting is exciting but very tasking. You look out for the perfect new property to buy or to rent in your new area one that is easily affordable and utmostly appropriate for your lifestyle.

2) Selling Your Old Home / Ending The Lease Agreement

If you’re moving out of a rented property, you need to recall the terms and conditions in your lease agreement and notify your landlord about your movement to a new house.

3) Ensuring Professional Moving Assistance

Unless you’re Moving just within the town or have very few items to relocate, performing a DIY move is not a recommendable option. You’re going to need professional moving assistance in order to ensure the successful outcome of your relocation, so you’re strongly advised to allow yourself enough time to research your moving options.

4) Putting Your Paperwork in Order

Have in mind that obtaining and/or updating all the necessary documents usually takes time, so you need to start preparing the paperwork as early as possible. Don’t forget that you will need some time to review and properly organize your papers, as well.

5) Organizing Your Belongings and Getting Rid Of Unwanted Items

When moving house, there is need to look through all your physical possessions and decide the fate of each and every one of them – set aside the things you’re going to relocate to your new home, throw away any useless.

6) Packing Your Belongings

Packing is the most strenuous and time-consuming task you’ll have to take care of when moving house.

7) Moving Day

The actual time your movers will need to take your belongings out of your old home and load them onto the moving truck depends on:

The number of boxes to be loaded onto the moving truck;

The number of furniture pieces and household appliances you want to relocate;

How well prepared you are,

The flights of stairs your items will have to be taken up or down or the free access to an elevator;

The moving truck accessibility.

8) Transportation to Your Final Destination

Depending on the actual distance between your old home and your new one, as well as on the traffic and the weather conditions at the time of your move, the transportation of your items may take from several hours (for a move across town) to about a week (when moving from coast to coast).

9) Unpacking and Settling In

It won’t take the movers long to unload your goods and take them into your new home (several hours, depending on the size of your shipment), especially if you know where you want each and every item to go. Upon your request, the moving experts will also help you reassemble furniture, connect appliances, and unpack your most essential items.

The time it takes to relocate depends on individual circumstance, Therefore, the average time to move house is estimated to be about 8-16 weeks.