Find a Shop Fitter you can trust in Lymm.

As the summer months draw nearer, you get better accustomed to the ambient noise produced by your air conditioning system which is constantly in operation to keep your home cool and comfortable for both you and your loved ones. During this period, it’s absolutely normal to expect a spike in your energy bill and wish to know how you can limit the expenses without having to sacrifice your home’s temperature. In this guide, we’re going to consider some of the major ways you can save energy in your home without having to sacrifice your air conditioning system. Let’s take a look!

1. Reduce phantom loads. This is an electronic appliance that still makes use of energy even when turned off and not in operation. These phantom loads are actually everywhere in your home but you just don’t know that the television, toaster or even your phone’s charger continue to suck electricity when they’re not in use.
2. Incorporate more energy-efficient appliances. Before making a purchase, ensure that the appliance has the Environmental Protection Agency’s Energy Star Label as they use 10 to 15 percent less energy than their counterparts.
3. Change out your light bulbs. The older your incandescent light bulb gets, the more energy it consumes. You can cut cost by reglarly changing them out.
4. Install a programmable thermostat. With such a device, you can adjust your home’s temperature to your schedule and needs to cover for the time when you would not be home.
5. Use fan. A cooling fan can significantly lower the cost of running an AC system.
6. Seal all air leaks. Blocking all air leaks in your home is a great way to ensure energy is well maximized
7. Make your windows more efficient.
8. Enhance you insulation
9. Conduct a regular servicing of your AC unit
10. Setting the air conditioning temperature higher at night

How To Lay Block Paving

Do you wish to know how to install block paving? We’ve got you covered! Here, you’ll find a useful step by step guide that’ll provide you with all the necessary information to lay a wide range of block paving products available in the market today. You must, however, note that the installation of block paving can be a tricky affair and should not be attempted unless you have undergone a proper training or have a good experience in the field. If otherwise, we’d advise you to leave the task for a reliable block laying professional to guarantee the best results and also avoid making costly mistakes.

lDesign

• Draw up a design to perfectly suits your needs.

• Decide on the type of block as well as colour.

lExcavation

• Use a mini excavator or a JCB ( depending on the size of the job) to excavate the driveway.

• Identify and mark out the area to be excavated.

• Dug out the area until you reach a suitable level

• Ensure that the proposed finish level is 150mm underneath the damp proof course in any of the adjoining building’s brick.

lEdge Restraints

• Build a 100mm depth-thick concrete foundation with the help of a concrete mixer, 1 part cement and 6 parts ballast.

• Position the kerb unit on top of the level with a string line and spirit level.

• Use a trowel and rubber mallet to mortar the kerb unit to the foundation.

• Haunch the back of the kerb units in such a way that the concrete reach half way up the kerb’s rear.

lSubbase

• Put the crushed concrete in the edge restraints and ensure it’s at the desired level of 50mm.

• Use a vibrating plate to compact and level

lScreeding

• Apply a layer of sharp sand (to 50mm depth) and campact it using a vibrating plate.

• Apply second layer of sharp sand (to 20mm depth) on top of the first layer.

• Level the second layer to the correct falls.

lInstallation Of Paving

• Lay the block paving starting from the bottom of a slope.

• Ensure the blocks are placed at about 10mm to 15mm above the required finish level.

• Make sure the blocks used are between 3-5 packs as you proceed with your desired pattern. You may need to cut smaller block pieces to fill smaller gaps.

lFinishing Touches

• Clear out the area to ensure no debris is left on the blocks.

• Put kiln dried sand and brush across the whole of the area, ensuring the sands falls between the blocks’ joints.

• Compact the drive with the vibrating plate.

• Brush more kiln dried sand over the area and compact again

• Repeat the process until the joints are full of sand.

Cement is a crucial element in bricklaying that’s widely used in both construction as well as finishing works. Generally, they’re used to aerate concrete blocks, connect bricks, prepare plaster, floor levelling as well as the making of precast products. The major reason cement is one of the most common construction materials as its incredible ability to hold structure together. To get a cement plaster, you’d simply have to mix cement with both water and sand. However, when you mix cement with lime, sand and water, you’ll get a mortar.

For cements mortars to be used inside joints, you’ll have to include 1 part cement at the minimum to not more than 2 parts sand by weight which should be dry mixed and moistened with enough water to allow for troweling and packing without falling apart. Generally, the cement sand ratio in a mortar is in between 1:2 to 1:6. The cement and sand mix ratio is largely based on the importance of the project.

Cement provides a plethora of uses in bricklaying and these includes:

• Preparation of cement concrete

• Preparation of cement mortar

• Building fireproof and thermal proof structures

• Building chemical proof structures

• Serving as a grout material

• Building hydrographic and frost resistant structures

• Manufacturing precast members

• Constructing aesthetic concrete

• Constructing cement concrete roads

There are several types of cements with each having its specific purpose. For instance, the type of cement more suited to building a fire proof structure is a high alumnia cement and to build a hydrographic structure, cements like expanding cement, hydrophobic cement, pozzolana cement and quick setting cement are the best bet. Acid resistant cements are more useful in building chemical proof structures, portland cements are best suited to making grout materials, while coloured cements are preferable to building aesthetic structures.

Unfortunately, you can’t fix the glass on one side of a double glazed window. That’s because they’re sealed units – once one pane of glass is broken, that will break the seal and its thermal insulation properties will be lost.

The good news is that if your window frame is still looking great, there’s no need to replace that. You can simply replace the glass in the window, which will cost much less. You can look to spend around £250 on a sealed unit, whereas a whole replacement single window may cost up to £600.

When an installer comes to replace the glass in your double glazed window, they will survey the inside and outside of your home around the window, then move any furniture by the window so they’ve got access. They should then pop a dust sheet down to stop any debris from getting on your floor.

Then, the installer will carefully remove the beads from the frame. They will then lift the glass out of the frame and put it somewhere safe before cleaning out all of the dust and any debris that has found its way into the frame. Using spacers at the bottom of the frame, the installer will make sure that the sealed unit is square in the frame to get a good fit. Once they’re happy, they will replace the beading and make sure it looks perfect before cleaning up their tools.

You could have a go at replacing the glass on a double glazed window yourself, but it’s not recommended. Leave it to the professionals who will know exactly what to do and will be able to do it quickly and safely.

Nobody likes bed bug! The sight of one can send even the most rational people you know into a state a state of panic. However, it doesn’t have to be so as there are a bunch of effective ways you can employ to get rid of bed bug infestation in a way that’ll fit both your budget as well as schedule. Although, it’ll take both diligence and consistency from your part, but it’ll take care of the bed bug infestation for good. In this post, we’re going to walk you through an effective process in which you can get rid of bed bug infestation in your home. Let’s take a look!

• Prepare your room for the treatment. This involves removing any items in the room that you can’t treat or that have already been treated. Cover the items that will be removed with plastic bags before moving them to the next room in order to prevent any unseen bed bug from infesting the other room. Also, remove the painting or art from the walls and check all the items that’s removed thoroughly to make sure the bed bugs are not transferred to the other room. If your mattress is heavily infested, you’d have to cover it with a bed bug proof mattress cover or a bed bug mattress encasement before moving
• Treat the crevices, cracks, tufts and folds of your home for bed bugs. Make use of a variety of products to kill and control beg bugs for a more effective result.
• Treat your mattress for beg bugs. To do this, make use of an aerosol spray labelled for bed bug treatment and spray the insecticide onto the mattress while focusing on the seams, tufts and folds until the mattress appears damp. Then allow it to dry before remaking the bed. Once done, you can also encase the mattress in a bed bug proof cover to prevent re-infestation.

Over the years, garden rooms have gradually become a popular choice amongst homeowners as a cost effective way of expanding living space within a home or property. A garden room is basically a living space and a type of pavilion building made from wood that’s well insulated, double glazed as well as electrically wired. It’s however a building which is subsidiary to the main one, built with the purpose of creating an extra functional space within the property. These garden outbuildings are very functional and can be used as a garden studio, office, salon and much more. They can also be incorporated for recreational purposes for evening relaxations, family and friends get-together, lounge or even spa. Other possible uses of a garden room include gyms, pool houses, playrooms, dens, home cinemas and game rooms.

Garden rooms are functional living spaces that are usable throughout the year. And with the rate at which their popularity is growing, you’ll find some companies offering cheap and low quality alternatives featuring shed like construction and felt roof. Garden rooms, on the other hand, are a valuable investment with superior designs and top notch build. They’re constructed in a very similar way to houses with timber frames. Furthermore, they are fully insulated and can also include the normal building solutions such as heating and running water, electricity and many more depending on the requirements of the home or property owner. With the durability of garden rooms being a major objective, they’re typically clad in natural solid timber like Cedar, Larch or Acacia. Materials such as EPDM rubber or cedar shingles are normally used for the roof covering. What’s more? They usually have large expanses of glazing and glazed doors fitted.

If you happen to possess a upvc door, then you’re likely to notice two main things about about it. Firstly, it’s built to last and will most likely work perfectly well for several more years to come. Lastly, after just a couple of years, it’ll start showing signs of ageing - it starts to fade and becomes dull or discolour which is a problem that’s commonly identified with white plastic after some time and even more so when exposed to the sun and rain year in year out. Unlike back in the days where you’d have to replace your old upvc door due to discolouration, now you’d only have to repaint it which will only cost just a fraction of the price that would have been expended to get a replacement upvc door. By painting your upvc door, you’ll have it looking its best again while also adding to the curb appeal of your home.

Now painting of a upvc door is a very tricky and dangerous affair as it requires a lot of practice and any if proper care is not taken, you can easily inject yourself with paint. As a result, if you lack the skill or confidence required to carry out this task, then we’d strongly recommend you get in touch with a professional who can guarantee the best results the first time. If you wish to paint your upvc door, here are the four simple steps to it:

1. Remove any door furniture
2. Prepare the upvc door for the painting
3. Select a paint that’ll work on upvc doors
4. Decide on the finishing touches

Many types of loft are suitable for a loft conversion. In general, you will need at least 2.3 metres of headroom in your existing loft. This is to make sure there is enough headroom after the conversion. Speak to a conversion specialist about the probability and possibility of doing this in your house.