Find a Shop Fitter you can trust in Sale.

How To Remove Flaking Paint From Exterior Walls

For a successful exterior wall painting project, all that’s required is the right painting tools and equipments, the appropriate exterior paint as well as the necessary preparation of the surface. With the later being perhaps the most important part of the project which is likely to take your time and effort as there’s no short cut to it. But once you have a good idea on how to prepare the exterior wall’s surfaces, the painting of the exterior of your house becomes a lot easier. And a good example of this, is the process of removing the flaking paint on the surface. Fortunately, you do not require the skills of an expert to be able to remove the flaking paint from your exterior walls. So let’s take a look at how you can remove flaking paint from your exterior walls with relative ease.

✓ Clear all flaking or peeling paint. This involves scraping the entire painted surface with a scraper to remove all loose paints. For the paints that wouldn’t yield easily, you can apply extra pressure to wipe it out. However, it’s important to be careful while doing this to avoid gouging out or damaging the surface.

✓ Use coarse sandpaper. Make use of a sandpaper to sand all the exterior wall’s surfaces until they’re smooth. When you get to tight spaces and trim, you can incorporate a sanding block to make your job easier and more effective. Note that a smoother surface will make for a better adhesion.

✓ Use an orbital or power sander. If the paint is peeling, you can scrape it off perfectly with the help of a power sander. This will help you in achieving a smooth surface on inaccessible edges and more.

If you’re looking to install some new solar panels in your home or property, then you’d probably want to know how it works. This is one of the most frequent questions asked by homeowners when it comes to solar panels and in this article we aim to give you a good insight on the operations of solar panels. Let’s have a look!

Generally, solar panels work by absorbing the energy of the sun and then converting it into electricity. It functions by allowing photons from the rays of the sun release the electrons free from atoms within the photovoltaic or solar cells in order to produce a flow of electricity. There are several solar cells that are connected together ( usually 60 or 72 ) in each panel. Individual cells comprises both a negative layer and a positive one which combines perfectly to create an electrical field in which the energy is generated.

The boron that’s within the bottom layer generates the positive charge, while the phosphorous found in the silicon layer produces the negative charge. In order to convert the sun’s rays into the energy that’s going to be transported from the panels to the inverter, the two field will interact with one another.

In other words, solar panels work by turning photons from the sunlight into direct current which is transmitted to the inverter. Once it gets to the inverter, it’s then translated to alternating current and send this current to to your electric box which powers the entire home. If you do not wish to reduce the high bills that’s associated with renting power from the grid, the solar energy system is an efficient and affordable way to achieve this aim.

Solar cells , also referred to as photovoltaic cells (PV), absorbs energy from the sun and converts it to generate electricity. This, however, should not be confused with photovoltaic thermal cells or PVT which operates to generate heat for water in homes. Solar cells are linked electrically and also carefully organized into a large frame which is popularly called solar panels. Generally, solar cells are produced or made of silicon semi conductors which works to absorb sunlight and then turn it into electricity for use at a home. A solar panel comprises of either 60 or 72 solar cells which are electrically interconnected in series and parallel and also positioned in between glass and plastic which is then framed.

At present, solar panels incorporated for residential or domestic purposes only possesses the capacity to make use of only about 20 percent of the sunlight they’re able to absorb and convert it to electricity - also called solar efficiency. Available in the market are also a wide range of solar cell available for both industrial and commercial purposes. This type of solar panels have an efficiency rating of about 40 percent which will also automatically make them more costly than the domestic types.

One great thing about the solar industry is the fact that it keeps improving in such a way that raises both its efficiency as well as overall quality. And with further research and development, this is expected to even increase as the years go by. What’s more? As these aspects keep rising, it’s also expected that the solar panels price should be on a decrease. That way, they’ll become available to a wider range of individuals who’ll also like to save money on electricity bills and go greener.

How To Repair A Pothole In Gravel Driveways

When the integrity of your gravel driveway is impaired not only does it have a negative impact on the curb appeal of your property, but also makes your driveway a danger zone. If your driveway needs to be repaired, you’d simply have to grab the bull by the horn and get it done - the sooner, the better to avoid the problem getting worse and to have your beautiful gravel driveway back as soon as possible.

The major cause of potholes in driveways is usually water, when it gets trapped beneath the surface of the driveway. Therefore, you may also want to enhance the drainage in the area as part of your repair. The repair process is quite simple for confident do-it-yourselfers, but if otherwise, then calling in a reliable professional will save you some time and extra money that can result from possible errors. So how do you repair gravel driveway potholes?

✓ Prepare the area. This involves removing all forms of debris from the pothole. To achieve this, you can rake, shovel or brush the loose stones, soil and other debris from the pothole.

✓ Fill the pot hole. Make use of a coarse gravel to fill up the pothole to a depth of about 3 inches beneath the driveway’s level. Upon the filling, simply tamp down the coarse gravel using a commercial tamper or any available homemade option. Once done, the final 3 inches to the surface of the gravel driveway should then be filled up with gravel which perfectly matches the colour and texture of the remaining driveway.

✓ Compact the patch. To achieve this in an easy and fast way, simply run your car’s wheel up and down over the repaired spot gently a couple of times. This will be enough to compact the patch and seal the pothole.

In general, no – you don’t need planning permission for a Velux window. The Planning Portal says that you don’t need to apply for planning permission to install a roof window if the following conditions are met:

• A roof window must not protrude more than 150 millimetres above the existing roof plane
No roof window or any other alteration can be higher than the highest part of the roof or stand out above the roof ridge
• Side-facing windows must have obscure glazing to protect privacy of neighbours and, if they open, they must be 1.7 metres above the floor of the room in which they are installed

You don’t need to apply for planning permission for a roof window because they are covered under permitted development rights. However, if you’re a leaseholder or you live in a building where your local authority has made an Article 4 Direction, you will have to apply. Usually, an Article 4 Direction is made when you live in a conservation area where any external home improvements could affect the character and look of the area. Luckily, there are special Velux windows that are designed to be more likely to be accepted by your local planning authority. They’re called conservation windows and, although there’s still no guarantee that they will be accepted, they are designed to look more traditional. Even if you don’t need planning permission for your roof window, you still need to follow any relevant building regulations for your local authority. The most important parts for Velux windows are section J and section L of building regulations, which refer to energy efficiency, thermal insulation and fire protection.

The main features of a lean to conservatory is a flat angled roof which is backward sloping. This type of conservatory is best added to houses which do not have height or possesses only a small space. If you’re looking to install a lean to conservatory in your home or property, one of the first things you’d have to consider is the cost of getting it done so you can set a budget and start planning. In this article, we’ll give you an idea of how much a lean to conservatory price is, so you can have a rough estimate for your conservatory requirements.

Generally, the average cost of conservatory can be within the range of £5000 to £20000 and of course this depends on both the design and home. There are a number of influencing factors that can play a key role when it comes to determining how much you’ll be paying for your conservatory. Some of these factors include the size, style, material, colour as well as the roof type. All of these factors can greatly determine the overall price of your lean to conservatory, so you’d most likely have to approach the acquisition process as a multi-staged concept so as to get the perfect fit for your home in every level.

So with these factors in mind, a lean to conservatory style with a polycarbonate roof material will range between £8100 to £11900. A lean to conservatory style with a glass roof material will range between £9000 to £13200. Overall, the lean to style prices usually ranges from £3900 to £20000 depending on the size of the structure.

If used and maintained properly, air conditioning can actually be a great way to create a healthier environment. As well as controlling the temperature, it also filters your air, removing pollutants like dust, pollen and mould particles.

However, to maximise these benefits, it’s important to keep your system clean. Dirty units and systems can become a health hazard, so always make sure you service your air conditioning at least once or twice a year.

It always an exciting decision to extend your home, be it adding to an existing room or building a new one all together. However, the problem starts when you realize there are so many options giving you a tricky challenge of knowing which to choose or where to start. There are great differences in renovations between homes, but a common question that remains is whether to go for a conservatory or an orangery.

There are large array of differences between the styles and knowing a thing or two about the special attributes is definitely a great way to get started. Let’s have a look!

• Orangeries are generally best suited to traditional-styled homes or with older property making use of matching stone or brick in construction. Meanwhile for a more recent or modern property, a conservatory will be the better option to add the flair to your property.

• Conservatories tend to be larger than orangeries, therefore if you want a smaller extension, an orangery would be your best bet.

• Orangeries are typically rectangular in shape and is traditionally a more regular building meanwhile a conservatory can be shaped to suit your needs. With an conservatory, you can get a T-shaped, L-shaped, curved, double ended and lean-to extensions to suit your preference.

• An orangery usually possess a flat roof at the edges with a glazed lantern section right at the centre. You can also find more luxurious orangeries having two or more lantern sections. However, when it comes to the roofing, conservatories generally have more options. Some are gabled or pitched, others are lean-to with a plethora of choice to finish off the roof.

• Due to the fact that orangeries are made of more brick than glass when compared to conservatories, they usually provide more insulation than their counterpart. If your goal is to use the extension during the winter months, then constructing an orangery is the best bet.