Find a Shop Fitter you can trust in Widnes.

Whilst you may think conservatories are nearly all made from glass, this doesn’t have to be the case. If you live in a built-up area you could have a tiled rooftop to enable extra privacy, use obscure glass and even invest in blinds.Be aware that solid walls are possible but if the conservatory is manufactured with less than 50% of glass, you’ll need Buildings Regulations approval.

If you’re considering giving your home a quick facelift, laying of paving slabs for your outdoor living spaces might be a great way to start. It can be installed in some many parts of your home’s exterior from the pathways to driveways and from the yards to the patios. With proper training and experience, laying paving slabs is a very easy and quick process. However, the issue here is, how do you calculate the number of paving slabs you need? In this step by step guide, you’ll find all the information needed to help you get started. Once you’re able to get the accurate number of paving slabs, do ensure to include extras that’ll cover up for possible errors or damages.

Just like any other measurement task, it’ll be a lot easier when you know how as well as when you have the right tools to use for the job. To get started, you’ll need a tape measure, pen or pencil, pegs, string, hammer, paper and calculator.

• Draw a sketch of the area. This sketch will take note of the area’s length and width.

• Using strings and pegs, mark out the area to be paved

• Using a tape measure, take a measurement of the length and width of the space along the string lines and note them on the sketch.

• If the area is a drive make sure that the paved area is wide enough to accommodate the cars intended

• Multiply the length of the space by the width to get the area of the space.

• Once calculated, divide the total area of the space by the area of the single slab. This will give you an accurate number of the paving slabs you’ll require to complete your project.

How Much Is A Landlord Gas Certificate?

Do you know as a landlord in the UK, not only does the law requires you to conduct an annual check on all your gas appliances and chimney, but you’d also have to pay for it? Hence, giving birth to the commonly asked question, how much is a landlord gas certificate? With so many variances in CP12 certificate prices everywhere, it can be so confusing knowing the actual one you’re expected to pay. Just by surfing the internet alone you’d come across loads of ads claiming they can help you with a cheap gas safety certificate only to discover that reverse is the case when you reach out to them. Here, you’ll get to know the real amount you’re expected to pay for the annual checks on your gas appliances and chimney.

First and foremost, let’s look at what a Gas Safety Certificate really is. This is a certificate that’s given out to landlords and property management companies after a check has been carried out on all their gas appliances and chimney. This statutory check is expected to be done every 12 months to ensure the safety of all those who make ue of your rental property. Homeowners living in ther property are not required by the law to conduct annual gas safety check, but it’s highly recommended that you get in touch with a Gas Safety engineer to ensure the safety of both you and your loved ones.

As a landlord in the UK, to get all your gas appliances and chimney inspected by an approved Gas Safety engineer and obtain your Gas Safety Certificate, you’re expected to pay within a range of £55 to £65. However, you should note that this cost will increase depending on the number of gas appliances you have (about 30% increase for each additional gas appliance).

The usual scaffolding value significantly differs depending on the nature of the brief construction that you require. If you rent scaffolding, the cost would range from £10 to £36. For a rental extending to a week, you can expect the scaffolding rental cost to range from £30 to £110. This cost will still be dependent on different factors like the kind of scaffolding, dimensions and the site. There are also instances where there are distinct costs for every frame section, guard rail and wheel.

How much does it cost to rent scaffolding if you need more height?

A quick fix is turning a workbench into a scaffold, in case you require more height. The cost ranges from £30 or more. This will depend on the capacity and size. If you want to use a folding ladder made of aluminium, the cost ranges from £220 to £580.

Using this ladder adds more support. If you rent a 4 wheeled scaffolding structure, you can expect the cost to range around £60 to £220. There might also be cases where you might need to add accessories along with the basic scaffolding which can add up to a cost of about £140.

What is the cost of renting scaffolding for heavy-duty?

It is a bit more expensive if you rent scaffolding for heavy-duty work and can cost you as high as £1450. For instance, the cost of a scaffolding that can hold up to 2000 pounds is about £870.

There are some extra costs that you need to include additionally. There are certain sections of the scaffolding which need to be transported, in this case, you will have to bear the fee of about £36. It can go as high as £110 depending on the distance travelled and the size.

Did you try rendering a wall but it doesn’t turn out the way you would have hoped for? Or perhaps you’ve been watching your wall render gradually deteriorate over time. Regard of your purpose, learning how to repair render cracks on wall is usually a great skill to have with your home maintenance in mind. However, whenever these crack are too large or difficult, we’d recommend you call in a reliable professional who can guarantee the best results for help. In this guide, we’re going to take you through the wall render repairing process. Let’s have a look!

No matter how solid a building material is, over time it’ll yield to the elements. When it comes to wall rendering it may be a case of too much sunshine or a costly mistake in the application process, but in truth, it cracks just because it cracks.

In order to repair render cracks, you’d have to start with a removal of damaged or cracked render. You’ll have to remove all the render or just a small section depending on the area you’re working on. If you’re able to clean all of the existing render as well as the paint over it all (both old and new), then removing a small section would work better as it makes it look neat and redone. Upon the removal of the existing render, the next important step would be to remove all loose material as well. Once done, you can then leave for up to 2 days to allow any trapped moisture to come out. Unfortunately, if the rains you’d have to wait till that dries too before you proceed.

Once dried, you can buy a pre-prepared render mix which already contains cement, lime and sand. Mix a 20kg bag with 4 litres of water (or check the product instructions and follow strictly), the mix to a fine consistency. Render is quick to dry, so you’d want to apply within 30 minutes of mixing. Make use of a trowel to apply the render on the affected spots and blend with the surrounding area.

Home electrics can be extremely dangerous and it’s very unwise to try and carry out repair work or maintenance yourself without the necessary knowledge and skill. Therefore we would always recommend using a Part P registered electrician at all times.

Over the years, more and more home and property owners are beginning to realize the huge benefits that can be derived from loft insulation being a worthwhile investment. It’s quite worrisome the way in which energy bills have soared over the past 10 years and loft insulation is a considerable affordable energy efficiency measure that can go a long way to help increase your home’s energy savings.

As far back as the 1980’s, the standard when it comes to insulation thickness was 25 mm to 50 mm which was, at the time, considered to be sufficient. However, building regulations have changed the norm that now states that a new build needs to possess 270 mm of insulation in the loft in order to achieve the required u-value of less than 0.16/m2k based on the standard rock wool or sheep wool insulation.

Generally with loft insulation, there’s a law of depreciating returns which implies that the first couple of insulation centimetres will save you many times the cost of the installation, however an extra layer or centimetre is going to add less value to the point where it’ll no longer be wise or worthwhile to add any further centimetre. Therefore, with cheaper energy prices 30 years back, that additional couple of centimetres was not just worthwhile, but with the recent alarming rises in costs of fuel, that additional £10 savings per year has all of sudden changed to £30 which makes it become a lot more attractive.

If you already have 270 mm of loft insulation, regardless of the material you’re looking to add you’re most likely not going to benefit from a top up. The cost of the materials and installation will definitely be too high for the couple of pounds it’ll save you per year.

Cockroaches, bedbugs, fleas, mice, rats, mosquitoes, spiders, squirrels and moths are just a few of the long list of pests that home and property owners have to battle with on a regular basis. Failure to hire the services of a professional pest control will not only heighten your worries about your property potentially getting damaged, but you may also be faced with serious health issues if care is not taken.

We all know these pests are everywhere, they’re scavengers digging through ash cans, dirt and even sewage lines to find food. And as a result, they are able to carry and transfer different disease-causing allergens as well as bacteria. If you live or work in a building that’s infested with pests then you’re automatically predisposed to facing various health issues. These could come in form of skin rashes, allergies, respiratory problems and more. With all these aforementioned terrific impact of pest infestation, the importance of getting a professional pest control simply cannot be overemphasized.

If you wish to hire a pest control professional, then you may also be worried about the price. Well, generally, pest control prices offered will largely vary based on a plethora of factors. These factors include where you reside, the kind of pest you want to remove, the scale of one’s infestation, the number of visits you require, the pest control company you hire as well as how large your home is. Generally, if you’re dealing with spider infestation in a four bedroom house, you can expect to pay within the range of £200 to £230 to have the spiders controlled. Meanwhile the price for the control of cockroach in the same house will cost within the range of £230 to £260. Overall, you can expect to pay within the range of £80 to £350 depending on the factors earlier stated.