Find a Shop Fitter you can trust in Camborne.

If you happen to live in a quiet, serene environment ( or just cherish being in one) and wish to have an air source heat pump installed on your property, then you’d probably want to know just how noisy these renewable energy source are. In this post, we aim to provide answers to this question and more. Let’s take a look!

There is no short and direct answer to this question as air source heat pumps are available in varying shapes and sizes which makes the sound as well as volume of their noise different between models and manufacturers. However, as a result of government regulations, most of the contemporary air source heat pumps are able to function a lot quieter when compared to the older models. As you would have expected, modern air source heat pumps shouldn’t produce more than a low whirring sound provided they’re functioning as they should with no faults. On the other hand, the volume of the sound generated is largely dependent on the amount of work the air source heat pump is doing. This implies that a greater work load will generate a louder noise. This is due to the fan’s speed which works to absorb warm air into the compressor.

In order not to disturb the neighbours, noise pollution is normally determined at the design stage of the air source heat pump installation. The unit to be placed outdoor will typically be positioned as far from the neighbours property as possible and it’s also a great idea not to put the box directly under any windows. Overall, it’s always advisable to go for the newer models which tend to be better designed with thicker chassis and quieter fans.

Strong winds can cause extensive damage to unprotected rooftops and in fact tiles act as very suitable protection. The extra weight they provide is great at countering high wind loads and if anything is damaged during severe weather, replacing tiles is straight forward for professional roofers.When you compare this to lightweight materials there’s a significant difference. If you wish to have extra protection, experts recommended having sarking fitted.

Most people want to connect solar panels to a battery when they’re not at home all day to use the electricity they generate, or generate more than they consume over a day. Solar batteries are a great way to maximise the savings on your energy bills since you can use every unit of electricity you generate.

If you want to connect your solar panels to a battery, the best – and safest – way is to ask an MCS-registered company to do it for you. They’ve had lots of training and hold qualifications in handling electricity and installing solar batteries, so they will be able to recommend the best battery for your solar panels and for the among of electricity you use. Some of the brands they might recommend include Tesla, SolarEdge and SolaX, but there are many more to choose from. If you want to send electricity to the grid from your battery to receive Smart Export Guarantee (SEG) payments, it’s also worth leaving installation up to a registered installer. This is because you might not be eligible for payments if your battery wasn’t installed by an MCS-registered company.

However, if you do want to have a go at connecting your solar panels to a battery, it’s worth finding out whether your system is ‘storage ready’. Most relatively new systems will be, since batteries are becoming more commonplace. If your solar panels are storage ready, they will have an inverter that can easily have a battery added to it. If this is the case, then you should be able to buy the solar battery you want and follow the manufacturer's instructions to install it.

But it’s worth remembering that electricity is extremely dangerous when handled improperly. If you don’t get the solar battery connected properly and something goes wrong, it could cause a fire or you could electrocute yourself. If a fire breaks out due to your battery, it’s unlikely that your home insurance company would pay out since you connected the battery yourself. That’s why it’s always worth speaking to a registered installer to install a solar battery storage system for you.

An asbestos survey is a property inspection to check for the presence of asbestos. A professional will go around your building and look at and take samples of any materials that they think may contain asbestos. These will then be tested to see if asbestos is present.

There are two types of asbestos survey, a Management Asbestos Survey and a Refurbishment and Demolition Asbestos Survey. A Management Asbestos Survey is mainly conducted to check if any materials containing asbestos pose a risk to inhabitants during everyday use of a building. A Refurbishment and Demolition Asbestos Survey is designed to check for any asbestos exposure risks before building work is started on a property.

Properly installed wooden decking will not need a lot of maintenance. Most manufacturers recommend regularly brushing leaves and dirt off the deck, and a yearly cleaning and staining procedure. This will keep the wood in the best condition. Fluids and treatments are readily available from all DIY shops and stores.

One of the big benefits of electric boilers is that they do not require annual servicing. There is no legal requirement for a yearly service and safety inspection as there is with gas boilers. Some installation companies do offer servicing packages included as part of the price.

How To Plaster A Wall

In order to plaster your wall successfully, you’ll firstly need to get the appropriate tools and materials for the job in place. The tools you’ll need to have includes a trowel and bucket trowel, plasterer’s float, corner trowel, hawk board, two buckets, mixing stick or a paddle, adequate plaster, PVA , dust sheets, clean water, sandpaper, stilts or step ladder as well as a dust mask.

✓ Prepare the wall. You’d have to make sure that you lay down a dust sheet so as to protect your floor and also gather any possible spillage or debris of plaster, before you start working on the walls. Get rid of all the dirt, dust and debris as this is very important for the success of your project if you’re going to be plastering on a worn out and old wall. Also, cover the holes and cracks in the walls with a screen tape

✓ Apply PVA to the wall. This will help ensure the layer you’re using will not dry out at the same time.

✓ Mix the paster. Mix the plaster according to the instructions given in the manufacturer’s manual.

✓ Apply the plaster onto the wall. Upon cleaning of the walls and successful mixture of the plaster, the next step is to apply the mixture to the wall using the hawk board, trowels and a floating tool.

✓ Skim and smooth. After the the first coat has dried after waiting for about 30 minutes, the next step will be to wipe out the bumps and lumps using a trowel to smooth over the surface. Once this is done you can then scrape the wall with a devilling float.

✓ Apply the second coat of plaster

✓ Apply the finishing touches. This includes polishing your work by adding some water to the surface with a spray gun and using the trowel to further smoothen out the surface.

✓ Painting and wallpapering.

By now, every homeower should be fully aware of the dangers of asbestos due to the fact that it can be found in a wide range of building products from the roofs and walls and right down to the floor tiles. An exposure to asbestos especially when disturbed can be life threatening as it can lead to a plethora of health issues which includes lung cancer, mesothelioma, asbestosis and lots more.

Asbestos are more dangerous when damaged or disturbed, but if they’re found in a great shape and are left undisturbed, then asbestos containing materials poses little to no threats. This dangerous material can be found in a large variety of insulation. And when compared to batt insulation, loose-fill insulation can be highly dangerous when it’s not installed in the right way. When poorly done, several particles of the asbestos can be released inside the wall or around pipes. As a result, insulation becomes a big worry that most homeowers will face down the road.

Homes that were constructed before the 1980’s commonly features steam pipes, hot water pipes as well as furnace ducts insulated with asbestos containing materials. And this is primarily because there’s no other fire retardant, thermal as well as acoustic insulator like asbestos that’s as effective and affordable as it is. However to really know if your building’s insulation is made with asbestos containing materials, you can take the following steps:

✓ Find out when your house was built. If it was constructed or renovated before the 1980’s then it’s likely to contain some asbestos materials.

✓ Although this is not advisable, but if you plan on checking the insulation by yourself, you should ensure to put on protect equipment such as goggles, gloves, masks and a safety suit.

✓ Check for insulation available in the building. The asbestos containing insulation in both batt and loose-fill types are grey-coloured so this shouldn’t be too hard to spot.

✓ Examine the pipe coverings especially the blanket type and cardboard coverings.